Development of an HPLC method with electrochemical detection of femtomoles of 8-oxo-7,8-dihydroguanine and 8-oxo-7,8-dihydro-2'-deoxyguanosine in the presence of uric acid

A selective method based on high performance liquid chromatography with electrochemical detection (HPLC-ECD) was developed to enable simultaneous detection of 8-oxo-7,8-dihydroguanine (8-oxoGua) and 8-oxo-7,8-dihydro-2′-deoxyguanosine (8-oxodGuo), products of DNA oxidative damage, in the presence of uric acid (UA), a strong interferent in their electrochemical detection. The method developed consists of HPLC isocratic elution with amperometric detection on a glassy carbon electrode, enabling a detection limit for 8-oxoGua and 8-oxodGuo lower than 1 nM in standard mixtures. Detection of low concentrations up to 25 nM of 8-oxoGua and 8-oxodGuo in the presence of UA in a 10⁴-fold higher concentration was achieved after one-step solid phase extraction (SPE). The method was tested with urine samples and it was possible to detect and quantify the presence of 8-oxoGua, and to confirm that UA was eliminated after uricase degradation and SPE. The LOD found in urine samples was about 80 nM, a value higher than in standard mixtures, due to the increase of background current in the urine matrix. The results presented here contribute to the development of a methodological approach to simultaneous determination of 8-oxoGua and 8-oxodGuo in urine samples.     

Electrochemical production, characterization, and application of MWCNTs

The subject of this study is production of carbon nanotubes (CNTs) using an original procedure of reduction of lithium molten salts onto graphite cathode; their structural characterization and application as support material for electrocatalysts aimed for hydrogen evolution. As-produced CNTs were characterized by means of scanning and transmission electron microscopy (SEM and TEM), Raman spectroscopy, and thermogravimetric and differential thermal analysis (DTA). SEM and TEM images have shown that nanotubes are mostly of curved shape with length of 1–20 μm and diameter of 20–40 nm. Raman peaks indicate that the crystallinity of produced nanotubes is rather low. The obtained results suggest that formed product contains up to 80 % multiwalled carbon nanotubes (MWCNTs), while the rest being non-reacted graphite and fullerenes. DTA curves show that combustion process of the nanotubes takes place in two stages, i.e., at 450 and 720 °C. At the lower temperature, combustion of MWCNTs occurs, while at higher one, fullerenes and non-reacted graphite particles burn. As-produced MWCNTs were used as electrocatalyst’s support materials and their performance was compared with that of traditional carbon support material Vulcan XC-72. MWNTs have shown almost twice higher real surface area, and electrocatalyst deposited on them showed better catalytic activity than corresponding one deposited on Vulcan XC-72.     

Novel anti-Plasmodial hits identified by virtual screening of the ZINC database

Increased resistance of Plasmodium falciparum to most available drugs challenges the control of malaria. Studies with protease inhibitors have suggested important roles for the falcipain family of cysteine proteases. These enzymes act in concert with other proteases to hydrolyze host erythrocyte hemoglobin in the parasite food vacuole. In order to find potential new antimalarial drugs, we screened in silico the ZINC database using two different protocols involving structure- and ligand-based methodologies. Our search identified 19 novel low micromolar inhibitors of cultured chloroquine resistant P. falciparum. The most active compound presented an IC₅₀ value of 0.5 μM against cultured parasites and it also inhibited the cysteine protease falcipain-2 (IC₅₀ = 25.5 μM). These results identify novel classes of antimalarials that are structurally different from those currently in use and which can be further derivatized to deliver leads suitable for optimisation.     

Anaerobic reduction of a sulfonated azo dye, Congo Red, by sulfate-reducing bacteria

The capacity for anaerobic decolorization of a sulfonated azo dye, Congo Red, by a strain of a sulfate-reducing bacterium was evaluated. After optimizing the growth rate of the bacteria on a simple carbon source and terminal electron acceptor pair, lactate and sulfate, respectively, the effect of the dye concentration on their growth rate was analyzed. The decolorization rate was affected by the dye concentration in the growth medium. The azo-bond cleavage mechanism of reductive decolorization with the formation of benzidine was consistent with the results, as this metabolite was identified by high-performance liquid chromatography. Several fractions of the culture medium, including lysed cell extracts, were examined for the capacity to reduce the azo dye. This reduction capacity was found in the culture medium in which the cells had previously grown. The results showed that the mechanism of reductive decolorization of this sulfonated azo dye was extracellular and nonenzymatic, consistent with the production of sulfide anion by the microorganisms while growing on lactate and sulfate. The sulfide anions were the cause of the reduction leading to the disappearance of color in the medium. To increase the rate of decolorization, the presence of ferrous ion was also necessary together with the lactate and sulfate substrates.     

Characterisation of Sugar Cane Combustion Particles in the Araraquara Region, Southeast Brazil

Biomass burning is an important primary and secondary source of aerosol particles. The presence of carbonaceous particles in the respirable size range makes the study of this fraction important in view of possible health and climatic effects. The annual burning of sugar cane plantations causes emission of huge amounts of pyrogenic particles. Aerosol samples were collected in Araraquara city, São Paulo state, Brazil, during the harvest season for fine and coarse particles and bulk; they were analysed by electron-probe microanalysis, including facilities for low-Z element determination (low-Z EPMA) and by energy-dispersive X-ray fluorescence (EDXRF), in order to investigate the elemental composition of individual particles and bulk samples, respectively. Numerical analysis of the EPMA results by hierarchical clustering shows high contributions of carbonaceous particles that can be distinguished mainly in two different types: biogenic and carbon-rich. Additionally, two significant contributions of aluminosilicate particles were identified: as rather pure aluminosilicates or mixed with carbonaceous species. The EDXRF results are compatible with those of aerosol particles in Amazon, which is nowadays one of the main sources of biogenic particles in the world.     

Transport properties of alkyltrimethylammonium bromide surfactants in aqueous solutions

Differential mutual diffusion coefficients of n-alkyltrimethylammonium bromides [CH₃(CH₂)_n–1N(CH₃)₃Br, C_nTAB] (n=10, 12, 14, 16) have been measured in aqueous solutions at 298.15 K using a conductimetric cell and an automatic apparatus to follow diffusion. The cell is based on an open-ended capillary, and the technique follows the diffusion process by measuring the resistance of a solution inside the capillaries at various times. The electrical conductances of those solutions have also been measured to calculate the critical micellar concentration (cmc). Thermodynamic analysis of the data suggests that the free ion concentration decreases at concentrations above the cmc, in agreement with theoretical predictions. The obtained values of the micellization parameters were used to model the mutual diffusion coefficients of C_nTAB aqueous solutions.     

Design and Application of a Set of Vitreous Standards for EDS-SEM Microanalysis of Melting Shop Slags

Non-metallic inclusions in steel are formed due to interactions between liquid steel and its environment in the melting shop (refractories and slags). Particles not trapped in the slag remain in the cast steel, impairing steel properties in service. Inclusion composition varies and certified standards covering the whole compositional range are unavailable.The present study describes the preparation of a set of homogeneous, glassy and crystalline standards with a wide compositional range for use in analysing non-metallic steel inclusions. For this, materials were designed based on knowledge of the compositional range of interest in the Al₂O₃–SiO₂–CaO–MgO–CaF₂ system, which is the matrix of the most frequent steel inclusions. The composition and microstructural homogeneity of the reference materials was verified.     

A sensitive, rapid and specific determination of midazolam in human plasma and saliva by liquid chromatography/electrospray mass spectrometry

A rapid, sensitive and selective liquid chromatography/electrospray mass spectrometry (LC/ES-MS) method was developed for the quantitative determination of the anaesthetic benzodiazepine midazolam (MID) in human saliva and plasma from patients undergoing anesthesia procedures. Biological samples spiked with diazepam-d5, the internal standard, were extracted into diethyl ether. Compounds were separated on a Xterra RP18 column using a mobile phase of acetonitrile/formic acid 0.1% at a flow rate of 0.25 mL/min under a linear gradient. Column effluents were analyzed using MS with an ES source in the positive ionization mode. Calibration curves were linear in the concentration ranges of 1-250 and 0.2-25 ng/mL in plasma and saliva, respectively. The limits of detection were 0.5 ng/mL in plasma and 0.1 ng/mL in saliva, using a 0.5-mL sample volume. The recoveries of the spiked samples were above 65%. The method was applied to ten real samples from patients undergoing midazolam treatment.