Determining nanomaterials in food

Nanotechnology has emerged as one of the most innovative technologies and has the potential to improve food quality and safety. However, there are a few studies demonstrating that nanomaterials (NMs) are not inherently benign.This review highlights some current applications of NMs in food, food additives and food-contact materials, and reviews analytical approaches suitable to address food-safety issues related to nanotechnology.We start with a preliminary discussion on the current regulatory situation with respect to nanotechnology in relation to foods. We cover sample preparation, imaging techniques (e.g., electron microscopy, scanning electron microscopy and X-ray microscopy), separation methods (e.g., field-flow fractionation and chromatographic techniques) and detection or characterization techniques (e.g., light scattering, Raman spectroscopy and mass spectrometry). We also show the first applications of the analysis of NMs in food matrices.     

Melting temperature evolution of non-reorganized crystals. Poly(3-hydroxybutyrate)

In the present study the correlation between the melting behaviour of poly(3-hydroxybutyrate) (PHB) original, non-reorganized crystals and the crystallinity increase during isothermal crystallization is presented and discussed. Since the reorganization processes modify the melting curve of original crystals, it is necessary to prevent and hinder all the processes that influence and increase the lamellar thickness. PHB exhibits melting/recrystallization on heating, the occurring of lamellar thickening in the solid state being excluded. The first step of the study was the identification of the scanning rate which inhibits PHB recrystallization at sufficiently high T_c. For the extrapolated onset and peak temperatures of the main melting endotherm, which is connected to fusion of dominant lamellae, a double dependence on the crystallization time was found. The crystallization time at which T_onset and T_peak change their trends was found to correspond to the spherulite impingement time, so that the two different dependencies were put in relation with primary and secondary crystallizations respectively. The increase of both T_onset and T_peak at high crystallization times after spherulite impingement was considered an effect due to crystal superheating and an indication of a stabilization process of the crystalline phase. Such stabilization, which produces an increase of the melting temperature, is probably connected with the volume filling that occurs after spherulite impingement.     

Bile UPLC-MS fingerprinting and bile acid fluxes during human liver transplantation

Bile flow restoration is a crucial step in the recovery process post transplantation of the liver. Here, metabolic trajectories based on changes in bile secretion - a known marker of functionality - have been utilised as an approach for discovering bile fluxes during transplantation. A total of ten liver transplants were monitored and from these 68 bile samples from both donors and recipients were collected and analysed using ultra-performance LC-MS in combination with multivariate statistical analysis. Based on the principal component scores constructed from the total bile fingerprint, differentiation of the bile acid concentrations before and after transplantation was detected. A trend was also observed, by constructing metabolic trajectories, whereby the post-transplant profiles approached the position of pre-transplant profiles within 30-60?min of the restoration of bile secretion function. The ten major conjugated bile acid salts were measured and a significant increase in concentrations of taurocholic acid and taurochenodeoxycholic acid were seen after transplantation. In addition, the ratios of secondary bile acids detected in gall bladder and hepatic bile were measured before and after transplantation. This study suggests that bile acid ratios in the donor liver at the pre-transplant and post-transplant stage may be important and that profiling of secreted bile after transplantation may aid clinical assessment and progress post-transplantation.     

A comparison of depletion versus equalization for reducing high-abundance proteins in human serum

In this work three methods to diminish the content of most highly abundant proteins in human serum have been studied and compared. Protein depletion with ACN or DTT and protein equalization with the ProteoMiner^? (PM) have been assessed by 1‐D gel electrophoresis and MS. After treatment 5, 18 and 9 major proteins within the 20 most abundant proteins in serum were identified for the ACN, DTT and PM methods, respectively. The ACN method was efficient for depleting high molecular weight proteins, over 75 KDa, resulting in 10±4% (n=3) of the total protein content remaining in the depleted serum. In addition, 75% of the proteins belonging to the group of the 20 most abundant proteins were not detected, making this depletion strategy a cheap alternative to expensive commercial tools regularly used for removing high abundance proteins from serum. The ACN extract was found rich in apolipoproteins. The dithithreitol method promotes the precipitation of proteins rich in disulfide bonds, mainly albumin, with 73±7% (n=3) of the total protein content remaining in the depleted serum, which was found rich in immunoglobulins. The PM method compresses the dynamic range of the serum proteins, rendering an extract containing 16±2% (n=3) of the total initial protein content. The extract was found to be rich in both apolipoproteins and immunoglobulins. As a general rule the DTT and PM methods provide a compression of the dynamic range of serum protein concentrations while the ACN method allows an effective depletion of the protein fraction above 72 KDa.     

Tribological durability of silane monolayers on silicon

We report the frictional performance and long-term tribological stability of various alkyl silane monolayer films on silicon by using pin-on-disk tribometry at ambient conditions. We show that the durability of monolayers derived from n-alkyltrichlorosilanes on silicon increases exponentially with the chain length of the silane precursor, which we relate to the cohesive energy of these monolayers through molecular dynamics simulations. X-ray photoelectron spectroscopy (XPS) was used to show that tribological damage consisted of the loss of molecular components that could be partially replaced upon exposure to a solution containing perfluorinated silane precursors. For monolayers derived from n-octadecyltrichlorosilane, a critical load was identified to be approximately 250 mN (200 MPa), above which failure of films occurred within 100 cycles of testing. Monolayers with hydroxyl surfaces exhibited reduced stabilities due to stronger tip-surface interactions. Monolayers with the capability for cross-linking exhibited much greater stabilities than monolayers where cross-linking was limited or prevented. Collectively, these results demonstrate that the mechanical durability of monolayers when subjected to a tribological load is greatly enhanced by maximizing dispersional interactions and cross-linking and minimizing tip-surface interactions.     

Multiple response optimization for Cu, Fe and Pb determination in naphtha by graphite furnace atomic absorption spectrometry with sample injection as detergent emulsion

The present paper reports the optimization for Cu, Fe and Pb determination in naphtha by graphite furnace atomic absorption spectrometry (GF AAS) employing a strategy based on the injection of the samples as detergent emulsions. The method was optimized in relation to the experimental conditions for the emulsion formation and taking into account that the three analytes (Cu, Fe and Pb) should be measured in the same emulsion. The optimization was performed in a multivariate way by employing a three-variable Doehlert design and a multiple response strategy. For this purpose, the individual responses of the three analytes were combined, yielding a global response that was employed as a dependent variable. The three factors related to the optimization process were: the concentration of HNO₃, the concentration of the emulsifier agent (Triton X-100 or Triton X-114) in aqueous solution used to emulsify the sample and the volume of solution. At optimum conditions, it was possible to obtain satisfactory results with an emulsion formed by mixing 4 mL of the samples with 1 mL of a 4.7% w/v Triton X-100 solution prepared in 10% v/v HNO₃ medium. The resulting emulsion was stable for 250 min, at least, and provided enough sensitivity to determine the three analytes in the five samples tested. A recovery test was performed to evaluate the accuracy of the optimized procedure and recovery rates, in the range of 88-105%; 94-118% and 95-120%, were verified for Cu, Fe and Pb, respectively.     

Gold nanowire networks: synthesis, characterization, and catalytic activity

Gold nanowire networks (AuNWNs) with average widths of 17.74 nm (AuNWN(1)) or 23.54 nm (AuNWN(2)) were synthesized by direct reduction of HAuCl(4) with sodium borohydride powder in deep eutectic solvents, such as ethaline or reline, at 40 °C. Their width and length were dependent on the type of solvent and the NaBH(4)/HAuCl(4) molar ratio (32 in ethaline and 5.2 in reline). High resolution transmission electron microscopy (HR-TEM) analysis of the gold nanowire networks showed clear lattice fringes of polycrystalline nanopowder of d = 2.36, 2.04, 1.44, and 1.23 ? corresponding to the (111), (200), (220), or (311) crystallographic planes of face centered cubic gold. The purified AuNWNs were used as catalysts for the chemical reduction of p-nitroaniline to diaminophenylene with sodium borohydride in aqueous solution. The reaction was monitored in real time by UV-vis spectroscopy. The results show that the reduction process is six times faster in the presence of gold nanowire networks stabilized by urea from the reline (AuNWN(2)) than in the presence of gold nanowire networks stabilized by ethylene glycol from ethaline (AuNWN(1)). This is due to a higher number of corners and edges on the gold nanowires synthesized in reline than on those synthesized in ethaline as proven by X-ray diffraction (XRD) patterns recorded for both types of gold nanowire networks. Nevertheless, both types of nanomaterials determined short times of reaction and high conversion of p-nitroaniline to diaminophenylene. These gold nanomaterials represent a new addition to a new generation of catalysts: gold based catalysts.     

A kinetic investigation of surfactant‐free emulsion polymerization of styrene using laponite clay platelets as stabilizers

We report the kinetics and mechanism of soap‐free emulsion polymerization of styrene using laponite platelets as stabilizers. The polymerization was initiated by potassium persulfate and the latex particles were stabilized by laponite platelets dispersed in water. Laponite adsorption on the polymer particles was enhanced by the addition of poly(ethylene glycol) monomethylether methacrylate (PEGMA). Particle nucleation can be described using the classical homogeneous nucleation mechanism followed by coagulation of unstable precursors. Oligomeric radicals formed in the water phase become insoluble and precipitate on the laponite surface leading to primary precursor particles composed of a few polymer chains and one or several clay platelets. Mature latex particles are then generated by coagulation and growth of the previously formed precursor particles. Both the nucleation and initial aggregation rates increased in the presence of PEGMA. Calorimetric monitoring of the polymerization allowed estimating the heat produced by the reaction and the monomer conversion. Hence, using the monomer material balance, the number of radicals in the polymer particles could be estimated precisely. The average number of radicals per particle, $ \bar n $ , was found to be high in the range 3–6. This result was attributed to strong attractive interactions between the growing radicals and the clay surface. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Design and characterization of bi-soft segmented polyurethane microparticles for biomedical application

Bi-soft segmented poly(ester urethane urea) microparticles were prepared and characterized aiming a biomedical application. Two different formulations were developed, using poly(propylene glycol), tolylene 2,4-diisocyanate terminated pre-polymer (TDI) and poly(propylene oxide)-based tri-isocyanated terminated pre-polymer (TI). A second soft segment was included due to poly(?-caprolactone) diol (PCL). Infrared spectroscopy, used to study the polymeric structure, namely its H-bonding properties, revealed a slightly higher degree of phase separation in TDI-microparticles. TI-microparticles presented slower rate of hydrolytic degradation, and, accordingly, fairly low toxic effect against macrophages. These new formulations are good candidates as non-biodegradable biomedical systems.     

Adsorption of chlorhexidine on synthetic hydroxyapatite and in vitro biological activity

The kinetic of chlorhexidine digluconate (CHXDG) uptake from aqueous solution by hydroxyapatite (HA) was investigated by ultraviolet (UV) analysis performed in HA powder (UV-solid) after the CHX adsorption. Adsorption isotherm of chlorhexidine (CHX) uptake was modeled by a combination of Languimir and Langmuir-Freundlich mechanisms. Strong molecule-molecule interactions and positive cooperativity predominated in the surface when CHX concentration was above 8.6 μg(CHX)/mg(HA). UV-solid spectra (shape, intensity and band position) of CHX bound to HA revealed that long-range molecular structures, such as aggregates or micelles, started to be formed at low CHX concentrations (1.52 μg(CHX)/mg(HA)) and predominated at high concentrations. Grazing-incidence X-ray diffraction (GIXRD) analysis from synchrotron radiation discarded the formation of crystalline structures on HA surface or precipitation of CHX crystalline salts, as suggested in previous works. The effect of the HA/CHX association on HA in vitro bioactivity, cytotoxicity and CHX antimicrobial activity was evaluated. It was shown that CHX did not inhibit the precipitation of a poorly crystalline apatite at HA/CHX surface after soaking in simulating body fluid (SBF). Cell viability studies after exposure to extracts of HA and HA/CHX showed that both biomaterials did not present significant in vitro toxicity. Moreover, HA/CHX inhibited Enterococcus faecalis growth for up to 6 days, revealing that binding to HA did not affect antimicrobial activity of CHX and reduced bacterial adhesion. These results suggested that HA/CHX association could result in a potential adjuvant antimicrobial system for clinical use.