Novel CFCs-substitutes recommended by EPA (hydrofluorocarbon-245fa and hydrofluoroether-7100): Ion chemistry in air plasma and reactions with atmospheric ions

The ion chemistry of the title compounds, a nonafluorobutyl methyl ether and a hydrofluoropropane, is elucidated by a combination of studies using atmospheric pressure ionization mass spectrometry and triple quadrupole mass spectrometry. In the positive ion mode, the hydrofluoroether readily forms an [M - F]+ ion, attributable to hydronium ion induced dehydrofluorination, the product of which can be further hydrated to give a protonated hydrofluoroester. By contrast, the hydrofluoropropane does not react with the hydronium ion but rather gives hydrofluoroalkenylium cations via H atom and F atom abstraction by the dioxygen radical cation. In the negative ion mode, the fluorobutyl methyl ether undergoes dissociative electron capture with O2-*, O2-*(H2O), O3-*, and NO2- to generate the fluorobutoxy anion, which can dissociate by CF2[doublebond]O loss to give the perfluorocarbanion when the precursor ions are internally excited. The hydrofluoropropane reacts readily with common atmospheric anions to form molecular complexes with F-, O2-*, and O3-* and the strongly H-bonded species, O2-*(HF) and F-(HF). Interestingly, isomeric pentafluoropropanes form in the reaction with O2-*, either O2-*(HF) or F-(HF), depending on the specific pattern of the fluoro substitution.     

A new tripodal receptor for molecular recognition of monosaccharides. A paradigm for assessing glycoside binding affinities and selectivities by 1H NMR spectroscopy

A new tripodal receptor for the recognition of monosaccharides is described. The prototypical host 1 features a 1,3,5-substituted 2,4,6-triethylbenzene scaffold bearing three convergent H-bonding units. The binding ability of the t-octyl derivative 1a toward a set of octylglycosides of biologically relevant monosaccharides, including Glc, Gal, Man, and GlcNAc, was investigated by 1H NMR in CDCl3. A protocol for the correct evaluation of binding affinities was established, which can be generally applied for the recognition of monosaccharides by 1H NMR spectroscopy. A three-constant equilibrium model, including 1:1 and 2:1 host-guest association and dimerization of the receptor, was ascertained for the interaction of 1a with all the investigated glycosides. An affinity index, which we defined median binding concentration BC50 in analogy to the IC50 parameter, intended to address the general issue of comparing dimensionally heterogeneous binding data, and a limiting BC0(50)quantity describing intrinsic binding affinities were developed for evaluating the results. BC0(50) values for 1a range from 1 to 6 mM, indicating an intrinsic binding affinity in the millimolar range and a selectivity factor of 5 toward the investigated glycosides. The treatment has been extended to include any generic host-guest system involved in single or multiple binding equilibria.     

Reaction of methyl 4-nitrobenzenesulfonate with Br- in water-formamide tetradecyltrimethylammonium bromide micellar solutions

Summary The reaction methyl 4-nitrobenzenesulfonate + Br^- was studied in water-formamide tetradecyltrimethylammonium bromide micellar solutions. A pseudophase kinetic model was used to quantitatively rationalize the kinetic micellar effects observed     

Adsorption isotherms of a molecular imprinted polymer prepared in the presence of a polymerisable template: Indirect evidence of the formation of template clusters in the binding site

The current opinion about molecular imprinted polymers (MIPs) is that their molecular recognition properties are due to the presence of nanocavities formed during a polymerization process developed in the presence of a template molecule. According to this principle, the shape of these nanocavities is complementary to that of the template and non-covalent interactions are established between the binding site and a single template molecule. Nevertheless, there are some experimental indications that the real molecular recognition mechanism involves clusters of template molecules being packed into the binding site. Recently, it has been proposed that template molecules covalently linked to the binding site can act as nucleation points, enhancing the formation of these molecular clusters.We have tested this hypothesis by studying the adsorption isotherms of polymers prepared by imprinting them with 2,4,5-trichlorophenoxyacetic acid (2,4,5-T). Three different polymers were considered: P0, prepared without the template, P1, whose template was represented by 2,4,5-T molecules, and P2, whose template was 1/3 constituted by the polymerisable 2-(2,4,5-trichlorophenoxyacetoxy)-ethylmethacrylate (2,4,5-TEMA) and 2/3 by 2,4,5-T. The polymers were prepared by thermoinduced polymerization of template mixtures, 4-vinylpyridine and ethylene dimethacrylate. The crushed polymers were packed into HPLC columns and frontal chromatographic runs were performed by eluting the columns with a mobile phase containing variable amounts of 2,4,5-T.The experimental adsorption isotherms were fitted by using several isotherm models, and the Freundlich-Langmuir model was found to give the best fitting in terms of F-test. All the models considered showed a significant difference between the affinity constant values measured for the polymer P1 and P2, with a higher value for the polymer P2 (for Freundlich-Langmuir model: polymer P1, k=(2.00±0.43)×10⁴ M⁻¹; polymer P2, k=(1.93±0.0535)×10⁵ M⁻¹; ratio P2/P1, 9.65±2.09). Such experimental results support the hypothesis that a polymer prepared with a limited amount of template covalently attached to the binding site shows an increased affinity for the template itself.     

Substituent effects in eight-electron electrocyclic reactions

The main features of transition structures associated with eight-electron electrocyclic reactions have been studied with Density Functional Theory. It is found that conrotatory electrocyclization reaction of (3Z,5Z)-octa-1,3,5,7-tetraenes takes place via M?bius aromatic transition structures of helical conformation. The reaction is completely periselective. In general, transition structures having outward substituents are preferred with respect to the inward transition structures, irrespective of the pi-donor or pi-acceptor character of the substituent. In contrast with four-electron thermal conrotatory electrocyclic reactions, there is no satisfactory correlation between the difference in energy of activation between inward and outward substituents and the Taft resonance sigma(R) parameter.     

Novel Thiazole-Containing Complexing Agents and Luminescence of Their Europum(III) and Terbium(III) Chelates

The synthesis of novel thiazole-containing complexing agents and their luminescence properties with Eu^III and Tb^III ions are reported. One of these terpyridine analogues was also tested as an Eu^III labelling reagent, and its luminescence properties as an antibody conjugate were studied.     

Selenium and mercury bioaccessibility in fish samples: an in vitro digestion method

The assessment of hazard from selenium (Se) and mercury (Hg) contaminants in the food chain based on their potential bioaccessibility and on estimate of their actual content in fish is reported under an in vitro model. Atomic fluorescence spectroscopy (AFS) was applied for total selenium and mercury quantification. Selenium and mercury bioaccessibility varied depending on the type of fish analyzed. Se solubility in the gastrointestinal supernatants was higher in swordfish and sardine (76 and 83%, respectively) than in tuna (50%). A low Hg bioaccessibility (9-17%) was found for all the samples.Simulated human gastric and intestinal digestion led to the identification of selenomethionine (SeMet) and organic mercury in the three digested fish. Furthermore, these species were not modified during the digestion. Speciation of selenium compounds was done by liquid chromatography in conjunction with inductively coupled plasma mass spectrometry (LC-ICP-MS).Sardine had the most favorable Se:Hg, [Se:Hg]_{bioaccessible} and [SeMet:Hg]_{bioaccessible} molar ratios, making it preferable to tuna and swordfish.The effect of cooking was also evaluated.     

Approximate transferability in alkanenitriles

The atomic and bond properties of a series of alkanenitriles were calculated in order to analyze the transferability of the CN, methyl, and methylene groups. The calculations were carried out using the atoms in molecules (AIM) theory on RHF/6‐31++G**// RHF/6‐31G** wave functions obtained for compounds CN–R (R ranging from H to C₁₁H₂₃). Linear correlations between L(Ω) and N(Ω) were used to establish N(CH₂) and N(CH₃) nearly transferable values. Average values and maximum differences to the mean value of several properties were used for classifying the CN group. It shows a transferable behavior along the CN–R series for R>Et. The methyl group presents specific properties when R<Pr. The methylene groups can be classified considering both their position with respect to the end of the chain and the position with respect to the CN group. The atomic energy displays a dependence on the molecular size. Although this behavior does not allow to consider this property as transferable, both the ab initio total electronic molecular energies and the experimental heats of formation can be fitted, by linear regression analysis, as a function of the number of methylene groups. © 2001 John Wiley & Sons, Inc. Int J Quantum Chem, 2001     

Multivariate optimization of an axially-viewed inductively coupled plasma multichannel-based emission spectrometer for the analysis of environmental samples

An experimental design procedure was applied to optimize the operating conditions of an axially-viewed inductively coupled plasma emission spectrometer instruments equipped with echelle optics with cross dispersion and charge transfer device. The multivariate effect of carrier gas flow rate and r.f. power on several analytical figures was investigated and discussed. Both ultrasonic and pneumatic nebulization were used. For the final choice of the optimum, different criteria were taken into account, mainly plasma robustness, instrumental precision, analyte and background net emission, detection limits and signal-to-background ratios. It was found that the use of moderate power (1100W) and mean carrier gas flow rate (0.75 L/min) allows to obtain sufficient plasma robustness, satisfactory precision, and excellent signal-to-background ratios and limits of detection, favorable for ultratrace element determinations in environmental matrices.     

Identifying acetylated lignin units in non-wood fibers using pyrolysis-gas chromatography/mass spectrometry

A series of non-wood plant fibers, namely kenaf, jute, sisal and abaca, have been analyzed upon pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) of the whole material. The pyrolysis products mainly arise from the carbohydrate and lignin moieties of the fibers. The lignin-derived phenols belonged to the p-hydroxyphenylpropanoid (H), guaiacylpropanoid (G) and syringylpropanoid (S) structures, and showed a high S/G ratio of between 2.0 and 5.4, the highest corresponding to kenaf. Among the lignin-derived phenols released, small amounts of sinapyl and coniferyl acetates (in both cis- and trans-forms) were identified for the first time upon Py-GC/MS of lignocellulosic materials. Acetylation of the sinapyl and coniferyl alcohols was at the gamma-position of the side chain. The release of these alcohols derived from intact acetylated lignin units upon pyrolysis seems to indicate that the native lignin in the fibers selected for this study is at least partially acetylated. Sinapyl (and coniferyl) acetates have recently been suggested to be authentic lignin precursors involved in the polymerization of lignin along with the normal sinapyl and coniferyl alcohols. Py-GC/MS will offer a convenient and rapid tool for analyzing naturally acetylated lignins, as well as to screen plant materials for the presence of acetylated units in lignin.