Heterodinuclear Ln[bond]Na complexes with an asymmetrical macrocyclic compartmental Schiff base

Heterodinuclear lanthanide(III)-sodium(I) complexes [LnNa(L)(Cl)(2)(CH(3)OH)] (Ln=La[bond]Nd, Sm[bond]Lu), where H(2)L is a [1+1] asymmetric compartmental macrocyclic ligand containing a N(3)O(2) Schiff base and a O(3)O(2) crown-ether-like coordination site, have been prepared and characterized by IR, (1)H, (13)C, and (23)Na NMR spectroscopy, mass spectrometry, and electron microscopy. In the solid state, the lanthanide(III) ions coordinate the Schiff-base N(3)O(2) site, and the sodium ion occupies the O(3)O(2) crownlike cavity, as shown by the X-ray crystal structures of the Nd, Eu, Gd, and Yb derivatives. In these complexes, the lanthanide(III) ion is coordinated by two chlorine atoms in the trans position and by three nitrogen and two negatively charged phenol oxygen atoms of the Schiff base, and the ion is heptacoordinated with a pentagonal bipyramidal geometry. The sodium ion is coordinated by three etheric oxygen atoms and the two phenolic oxygens that act as a bridge. A methanol molecule is also coordinated in the apical position of the resulting pentagonal pyramidal polyhedron. A detailed (1)H and (13)C NMR study was carried out in CD(3)OD for both diamagnetic and paramagnetic heterodinuclear complexes [LnNa(L)(Cl)(2)(CH(3)OH)]. The complexes are also isostructural in solution, and their structures parallel those found in the solid state. Moreover, some significative distances determined in the solid state and in solution are comparable. Finally, the potential use of these complexes as molecular probes for the selective recognition of specific metal ions has been tested. In particular, their ability to act as shift reagents and the selectivity of the O(3)O(2) site towards Li(+), Ca(2+), and K(+) were investigated by (23)Na NMR spectroscopy.     

Synthesis of new 3-(phenoxyphenyl)sydnones marija Šindler-kulyk

The title compounds were prepared by dehydrocyclization of corresponding substituted N-nitrosoglycines obtained from isomeric o-, m- and p-aminodiphenyl ether with ethyl bromoacetate and subsequent nitrosation of the intermediate N-arylsubstituted glycines.     

DABCO-directed self-assembly of bisporphyrins (DABCO=1,4-diazabicyclo[2.2.2]octane)

Three isomeric zinc bisporphyrins have been prepared by covalently linking together two aminoporphyrins with an isophthalic acid derivative. The porphyrins differ in the substitution pattern on the meso phenyl groups, that is, ortho, meta, or para. Titrations carried out by UV-visible and 1H NMR spectroscopy have been used to map out the stabilities and the stoichiometries of the complexes formed with 1,4-diazabicyclo[2.2.2]octane (DABCO) in chloroform. The ortho- and meta-substituted bisporphyrins form 1:1 intramolecular sandwich complexes. The para-substituted bisporphyrin cannot adopt the cofacial conformation required for this type of complex and forms a higher order 2:2 intermolecular assembly, which is stable over a wide range of DABCO concentrations.     

Single electron traps at the surface of polycrystalline MgO: assignment of the main trapping sites

Paramagnetic centers at the surface of ionic oxides in the form of trapped electrons can be generated by exposure of the material to alkali metal or hydrogen atoms or of molecular hydrogen under UV irradiation. For many years, it has been assumed that the resulting paramagnetic centers consist of oxygen vacancies filled by one electron. High-resolution electron spin resonance spectra and ab initio quantum chemical calculations show that the paramagnetic centers consist of (H(+))(e(-)) electron pairs formed at morphological irregularities of the surface. At least three different kinds of (H(+))(e(-)) centers, [A], [B], and [C], have been identified with abundances of 80%, 10%, and 8%, respectively. In this work, we compare a wide set of measured and computed g-factors and hyperfine coupling constants of the unpaired electron with the surrounding (25)Mg, (17)O, and (1)H nuclei and we propose a general assignment of the centers. (H(+))(e(-)) pairs formed at Mg(4c) ions at steps and edges account for species [A], centers formed at Mg(4c) ions at reverse corners correspond to species [B], and species [C] originates from (H(+))(e(-)) pairs formed at Mg(3c) ions at corners and kinks.     

Synthesis of stereo-defined α-trifluoromethyl (Tfm)-malic units

Aldol reactions of titanium enolates of N-acyl-1,3-oxazolidin-2-ones with ethyl trifluoropyruvate occurred with low to good stereoselectivity depending on the steric properties of the N-acyl group. Attempts to transform the resulting aldols into peptidomimetics incorporating stereo-defined α-trifluoromethyl (Tfm)-malic units are described.     

Theoretical study of p‐methacryloyl‐aminophenylarsonic acid

Conformations of p‐methacryloylaminophenylarsonic acid (p‐MAPHA) are determined through molecular mechanics and DFT/B3LYP calculations. Solvation effects are studied within the self‐consistent isodensity continuum model (SCI‐PCM). The stationary points were found to correspond to minima as verified by the analysis of vibrational frequencies in the molecule. The molecular optical absorption was obtained by using different solvent environments. The present results are in good agreement with the available experimental data. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

Conformational dynamics of a bispyridinium cyclophane

A complete study of the conformational behavior of 4,8-diaza-3(1,4),9(4,1)-dipyridina-1,6(1,4)-dibenzenacyclodecaphan-3(1),9(1)-bis(ilium) bishexafluorophosphate is described. This study allows us to conclude that the process observed by which the different chemical shifts of the pyridinium protons show coalescence at a high-temperature 1H NMR is the rotation around the C-N bond, whereas the conformational equilibrium between the four conformers is produced at low temperature.     

Evaluating the significance threshold in robustness testing. A critical discussion on the influence of time in molecular fluorescence spectrometry

Robustness experiments are performed in analytical chemistry to assess the behaviour of an analytical procedure under conditions slightly different from those of the experimental optimum. This work presents a study of robustness applied to a previously proposed fluorescent methodology using two replicated 2(7-4) saturated fractional factorial designs. A comparison is established between three different ways to test the significance of the effects of the variables involved on the response signal. Critical discussions about the most appropriate threshold to be introduced when testing for significance of the factors and the influence of the time necessary to carry out the experiments are included.     

On the computation of molecular electronic affinities

Using a multireferent MBPT method (CIPSI) the electronic affinity (EA) of F, CN and HCC is computed. Results show how UMP2 gives unbalanced truncation of the MP series, while ROMP2 has the correct (balanced) behaviour. The good agreement with the experimental EA found for some compounds is accidental and associated to an error compensation. The good agreement with the experimental data found for the ROMP2 and CIPSI EAs is analysed.This paper was presented at the International Conference on The Impact of Supercomputers on Chemistry, held at the University of London, London, UK, 13–16 April 1987     

Determination of copper in medicinal plants used as dietary supplements by atomic absorption spectrometry with direct flame solid analysis

An alternative device for the direct solid analysis (DSA) for copper determination by flame atomic absorption spectrometry (FAAS) is proposed. Copper was directly determined in commercial medicinal plants used as dietary supplements. The determination of copper in solid samples by DSA–FAAS was made by using a conventional air–acetylene flame. Between 0.05 and 1.5 mg of each test, sample was weighed directly into a small polyethylene vial connected to the device used for solid introduction into the flame. Test samples were introduced into the flame as a dry aerosol using a T-quartz cell set between the burner and the optical path. The T-quartz cell has a slit in the superior part by which the solid aerosol passes to the flame. A transient signal, evaluated as integrated absorbance, is produced and it is totally integrated in 2 s. Background signals always presented absorbance values less than 0.1. It was found a characteristic mass of 0.8 ng Cu and absolute limit of detection of 1.2 ng (3 s), or 1.2 μg g⁻¹ if a sample mass of 1 mg was used. Optimized conditions for air flow rate, flame stoichiometry, and so on were established as well. No excessive grinding of the samples was needed and samples with particle of size less than 80 μm were used throughout. No statistical difference between the results from the proposed system and those obtained by sample digestion and determination by conventional FAAS was observed. With the proposed procedure, more than 50 test samples can be analyzed in 1 h and it can be easily adapted to conventional spectrometers for FAAS.