Determination of micro‐RNA in cardiomyoblast cells using CE with LIF detection

Micro‐RNAs (miRNAs) are small, endogenous, singlestranded, and noncoding RNAs. The miRNAs have been found to perform important functions in many cellular processes, such as development, proliferation, differentiation, and apoptosis. Circulating miRNAs have been proposed as emerging biomarkers in diseases such as cancer, diabetes, and cardiovascular disease including acute myocardial infarction (AMI). In this study, we developed CE with LIF (CE‐LIF) using fluorescence‐labeled DNA probe for determination of low abundance miRNA in cell extracts. The target miRNA is miRNA‐499, a biomarker candidate of AMI with low abundance in biological samples. In order to measure the trace level of miRNA, we optimized the hybridization conditions such as hybridization time, temperature, and buffer solution. The highest fluorescence intensity of the hybridized miRNA‐499 was found when hybridization was conducted at 40°C in 50 mM Tris‐acetate (pH 8.0) buffer containing 50 mM NaCl, and 10 mM EDTA for 15 min. The hybridized miRNA‐499 was detected in cultured H9c2 cardiomyoblast cells and the analysis of miRNA‐499 was completed within 1 h using CE‐LIF. These results showed the potential of CE for fast, specific, and sensitive high‐throughput analysis of low‐abundance miRNAs in cell extracts, biofluids, and tissues.     

THE INTERACTION OF WATER SOLUBLE MEAT PROTEINS WITH MONO-GLYCERIDE AND DIGLYCERIDE AT THE CORN OIL-WATER INTERFACE ANDITS EFFECTONTIME-DEPENDENT INTERFACIALTENSION REDUCTION.

The influence of water soluble meat protein (WSMP) /glyceryl monostearate/glyceryl distearate ratio on the time-dependent reduction of interfacial tension at the corn oil-water Interface has been investigated at pH's 2.5, 3.5 and 9.5.The total WSMP-glycerides content was kept constant at 1.0% wt/wt. Both variables had an effect, with maximum reduction in the steady state interfacial tension occurring when using 0.5% WSMP in conjunction with 0.5% glycerides (monoglyceride/diglyceride ratio 3/1) at pH 3.5.Under these conditions the WSMP and glycerides associate to form a complex at the interface. At other WSMP/glycerides ratios the interfacial film has a more heterogeneous composition,.     

Direct Blue 71 staining as a destaining‐free alternative loading control method for Western blotting

In Western blotting, a suitable loading control is indispensable for correcting errors in the total amount of loaded protein. Immunodetection of housekeeping proteins and total protein staining have traditionally been used as loading control methods. Direct Blue 71 (DB71) staining—a novel, sensitive, dye‐binding staining method compatible with immunodetection—may offer advantages over these traditional loading control methods. Three common neuroscientific samples (human plasma, human oligodendrocytes, and rat brain) were employed to assess DB71 staining as a loading control method for Western blotting. DB71, CBB, one traditional housekeeping protein, and one protein of interest were comparatively assessed for reliability and repeatability and linear dynamic range over 2.5–40 μg of protein loaded. DB71's effect on the reliability and repeatability and linear dynamic range of immunoreaction were also assessed. Across all three sample types, DB71 was either equivalent or superior to CBB and housekeeping protein‐based methods in terms of reliability and repeatability and linear dynamic range. Across all three sample types, DB71 staining did not impair the reliability and repeatability or linear dynamic range of immunoreaction. Our results demonstrate that the DB71 staining can be used as a destaining‐free alternative loading control method for Western blotting.     

Assessing calves as carriers of Cryptosporidium and Giardia with zoonotic potential on dairy and beef farms within a water catchment area by mutation scanning

In the present study, we undertook a molecular epidemiological survey of Cryptosporidium and Giardia in calves on three dairy and two beef farms within an open drinking water catchment area (Melbourne, Australia). Faecal samples (n = 474) were collected from calves at two time points (5 months apart) and tested using a PCR‐based mutation scanning‐targeted sequencing phylogenetic approach, employing regions within the genes of small subunit (SSU) of ribosomal RNA (designated partial SSU), 60 kDa glycoprotein (pgp60) and triose phosphate isomerase (ptpi) as genetic markers. Using partial SSU, the C. bovis, C. parvum, C. ryanae and a new genotype of Cryptosporidium were characterised from totals of 74 (15.6%), 35 (7.3%), 37 (7.8%) and 9 (1.9%) samples, respectively. Using pgp60, C. parvum genotype IIa subgenotype A18G3R1 was detected in 29 samples. Using ptpi, G. duodenalis assemblages A and E were detected in totals of 10 (2.1%) and 130 (27.4%) samples, respectively. The present study showed that a considerable proportion of dairy and beef calves in this open water catchment region excreted Cryptosporidium (i.e. subgenotype IIaA18G3R1) and Giardia (e.g. assemblage A) that are consistent with those infecting humans, inferring that they are of zoonotic importance. Future work should focus on exploring, in a temporal and spatial way, whether these parasites occur in the environment and water of the catchment reservoir.     

Fluorescent staining of protein in SDS polyacrylamide gels by salicylaldehyde azine

As a noncovalent fluorescence probe, in this study, salicylaldehyde azine (SA) was introduced as a sensitive fluorescence‐based dye for detecting proteins both in 1D and 2D polyacrylamide electrophoresis gels. Down to 0.2 ng of single protein band could be detected within 1 h, which is similar to that of glutaraldehyde‐silver stain, but approximately four times higher than that of SYPRO Ruby fluorescent stain. Furthermore, comparative analysis of the MS compatibility of SA stain with SYPRO Ruby stain indicated that SA stain is compatible with the downstream of protein identification by LC‐MS/MS. Additionally, the probable mechanism of the SA stain was investigated by molecular docking. The results demonstrated that the interaction between SA and protein was mainly contributed by hydrogen bonding and hydrophobic forces.     

Differential geometric analysis of alterations in MH α‐helices

Antigen presenting cells present processed peptides via their major histocompatibility (MH) complex to the T cell receptors (TRs) of T cells. If a peptide is immunogenic, a signaling cascade can be triggered within the T cell. However, the binding of different peptides and/or different TRs to MH is also known to influence the spatial arrangement of the MH α‐helices which could itself be an additional level of T cell regulation. In this study, we introduce a new methodology based on differential geometric parameters to describe MH deformations in a detailed and comparable way. For this purpose, we represent MH α‐helices by curves. On the basis of these curves, we calculate in a first step the curvature and torsion to describe each α‐helix independently. In a second step, we calculate the distribution parameter and the conical curvature of the ruled surface to describe the relative orientation of the two α‐helices. On the basis of four different test sets, we show how these differential geometric parameters can be used to describe changes in the spatial arrangement of the MH α‐helices for different biological challenges. In the first test set, we illustrate on the basis of all available crystal structures for (TR)/pMH complexes how the binding of TRs influences the MH helices. In the second test set, we show a cross evaluation of different MH alleles with the same peptide and the same MH allele with different peptides. In the third test set, we present the spatial effects of different TRs on the same peptide/MH complex. In the fourth test set, we illustrate how a severe conformational change in an α‐helix can be described quantitatively. Taken together, we provide a novel structural methodology to numerically describe subtle and severe alterations in MH α‐helices for a broad range of applications. © 2013 Wiley Periodicals, Inc.     

Local Hartree–Fock orbitals using a three‐level optimization strategy for the energy

Using the three‐level energy optimization procedure combined with a refined version of the least‐change strategy for the orbitals—where an explicit localization is performed at the valence basis level—it is shown how to more efficiently determine a set of local Hartree–Fock orbitals. Further, a core–valence separation of the least‐change occupied orbital space is introduced. Numerical results comparing valence basis localized orbitals and canonical molecular orbitals as starting guesses for the full basis localization are presented. The results show that the localization of the occupied orbitals may be performed at a small computational cost if valence basis localized orbitals are used as a starting guess. For the unoccupied space, about half the number of iterations are required if valence localized orbitals are used as a starting guess compared to a canonical set of unoccupied Hartree–Fock orbitals. Different local minima may be obtained when different starting guesses are used. However, the different minima all correspond to orbitals with approximately the same locality. © 2013 Wiley Periodicals, Inc.     

Computational gibberellin‐binding channel discovery unraveling the unexpected perception mechanism of hormone signal by gibberellin receptor

Gibberellins (GAs) are phytohormones essential for many developmental processes in plants. In this work, fundamental mechanism of hormone perception by receptor GID1 has been studied by performing computational simulations, revealing a new GA‐binding channel of GID1 and a novel hormone perception mechanism involving only one conformational state of GID1. The novel hormone perception mechanism demonstrated here is remarkably different from the previously proposed/speculated mechanism [Murase et al., Nature 2008 , 456, 459] involving two conformational states (“OPEN” and “CLOSED”) of GID1. According to the new perception mechanism, GA acts as a “conformational stabilizer,” rather than the previously speculated “allosteric inducer,” to induce the recognition of protein DELLA by GID1. The novel mechanistic insights obtained in this study provide a new starting point for further studies on the detailed molecular mechanisms of GID1 interacting with DELLA and various hormones and for mechanism‐based rational design of novel, potent growth regulators that target crops and ornamental plants. © 2013 Wiley Periodicals, Inc.     

TargetATPsite: A template‐free method for ATP‐binding sites prediction with residue evolution image sparse representation and classifier ensemble

Understanding the interactions between proteins and ligands is critical for protein function annotations and drug discovery. We report a new sequence‐based template‐free predictor (TargetATPsite) to identify the Adenosine‐5′‐triphosphate (ATP) binding sites with machine‐learning approaches. Two steps are implemented in TargetATPsite: binding residues and pockets predictions, respectively. To predict the binding residues, a novel image sparse representation technique is proposed to encode residue evolution information treated as the input features. An ensemble classifier constructed based on support vector machines (SVM) from multiple random under‐samplings is used as the prediction model, which is effective for dealing with imbalance phenomenon between the positive and negative training samples. Compared with the existing ATP‐specific sequence‐based predictors, TargetATPsite is featured by the second step of possessing the capability of further identifying the binding pockets from the predicted binding residues through a spatial clustering algorithm. Experimental results on three benchmark datasets demonstrate the efficacy of TargetATPsite. © 2013 Wiley Periodicals, Inc.     

QMX: A versatile environment for hybrid calculations applied to the grafting of Al2Cl3Me3 on a silica surface

We present a new software to easily perform QM:MM and QM:QM' calculations called QMX. It follows the subtraction scheme and it is implemented in the Atomic Simulation Environment (ASE). Special attention is paid to couple molecular calculations with periodic boundaries approaches. QMX inherits the flexibility and versatility of the ASE package: any combination of methods namely force field, semiempirical, first principle, and ab initio, can be used as hybrid potential energy surface (PES). Its ease of use is demonstrated by considering the adsorption of Al₂Cl₃Me₃ on silica surface and by combining different levels of theory (from standard DFT to MP2 calculations) for the so‐called High Level cluster with standard PW91 density functional theory calculations for the Low Level environment. It is shown that the High Level cluster must contain the silanol group close to the aluminum atoms. The bridging adsorption is favored by 58 kJ mol^?1 at the MP2:PW91 level with respect to the terminal position. Using large clusters at the MP2:PW91 level, it is shown that PW91 calculations are sufficient for structure optimization but that embedded methods are required for accurate energy profiles. © 2013 Wiley Periodicals, Inc.