Rates of ligand exchange between >FeIII-OH2 functional groups on a nanometer-sized aqueous cluster and bulk solution

Variable-temperature 17O NMR experiments were conducted on the nanometer-sized Keplerate Mo72Fe30 cluster, with the stoichiometry [Mo72Fe30O252(CH3COO)12[Mo2O7(H2O)]2[H2Mo2O8(H2O)](H2O)91]. approximately 150H2O. This molecule contains on its surface 30 Fe(H2O) groups forming a well-defined icosidodecahedron, and we estimated the rates of exchange of the isolated >FeIII-OH2 waters with bulk aqueous solution. Both longitudinal and transverse 17O-relaxation times were measured, as well as chemical shifts, and these parameters were then fit to the Swift-Connick equations in order to obtain the rate parameters. Correspondingly, we estimate: k(ex)298 = 6.7(+/-0.8) x 106 s-1, which is about a factor of approximately 4 x 104 times larger than the corresponding rate coefficient for the Fe(OH2)63+ ion of k(ex)298 = 1.6 x 102 s-1 (Grant and Jordan, 1981; Inorg. Chem. 20, 55-60) and DeltaH and DeltaS are 26.3 +/- 0.6 kJ mol-1 and -26 +/- 0.9 J mol-1 K-1, respectively. High-pressure 17O NMR experiments were also conducted, but the cluster decomposed slightly under pressure, which precluded confident quantitative estimation of the DeltaV. However, the increase in the reduced transverse-relaxation time with pressure suggests a dissociative character, such as a D or Id mechanism. The enhanced reactivity of waters on the Mo72Fe30 cluster is associated with an increase in the FeIII-OH2 bond length in the solid state of approximately 0.1 A relative to the Fe(OH2)63+ ion, suggesting that a correlation exists between the FeIII-OH2 bond length and k(ex)298. Although there are only few high-spin Fe(III) complexes where both exchange rates and structural data are available, these few seem to support a general correlation.     

Determination of volatile compounds in cider spirits by gas chromatography with direct injection

Two analytical methods based on gas chromatography with direct injection are described for the quantitative analysis of volatile compounds (acetals, aldehydes, esters, alcohols, and volatile phenols) in cider brandies. Analytes were divided into major, 15, and minor volatile, 24, compounds depending on their usual concentration in samples. Parameters usually tested for method validation are evaluated. Correlation coefficients are calculated to estimate linearity, obtaining values higher than 0.999. Detection limits range between 0.325 mg/L (1-propanol) and 1.663 mg/L (methanol) among the major volatile compounds and between 0.086 mg/L (ethyl 2-methylbutyrate) and 0.332 mg/L (ethyl tetradecanoate) among the minor volatiles. Mean recoveries ranged between 109% (ethyl lactate) and 95% (1-butanol) for major volatiles and between 109% (1-octen-3-ol) and 94% (ethyl 2-methylbutyrate) for minor volatiles, thus confirming the accuracy of both methods. Reproducibility for major volatiles is < 5.4% (furfural) in all cases and < 9.6% (hexyl acetate) for minor volatiles. Moreover, the accuracy of the methods is evaluated by analyzing a certified whisky and five samples from interlaboratory assays, generally obtaining results in accordance with previous values.     

Adsorption behavior of DODAB/DPPC vesicles on silica

The interaction between composite dipalmitoylphosphatidylcholine (DPPC)/dioctadecyldimethylammonium bromide (DODAB) bilayer vesicles in the gel state and silica is investigated over the 0-20% DODAB range from determination of adsorption curves, silica sedimentation, particle sizing and zeta-potentials. At 1 mg/mL silica, 0% DODAB, pH 6.3, over the 0-150 mM NaCl range of ionic strengths, high affinity adsorption curves were barely affected by ionic strength and all of them exhibited limiting adsorption values above the level expected for single bilayer deposition. At 1 mg/mL silica, 2% DODAB, pH 6.3 and 1 mM NaCl, high affinity adsorption curves fortuitously presented limiting adsorption indicative of one bilayer deposition on each silica particle. At %DODAB<2% or %DODAB>2%, limiting adsorption was above and below the level expected for bilayer deposition, respectively. Increasing %DODAB in the vesicle composition negatively modulated the limiting adsorption on silica despite the increasing surface charge on vesicles and electrostatic attraction between vesicles and particles. The results point out the difficulty of closed vesicle disruption (required for bilayer deposition from vesicles) when the bilayer is tightly packed in the rigid gel state and might be of interest for analytical applications of immobilized vesicles on silica.     

Surface tensions of imidazolium based ionic liquids: anion, cation, temperature and water effect

This work addresses the experimental measurements of the surface tension of eight imidazolium based ionic liquids (ILs) and their dependence with the temperature (288-353 K) and water content. The set of selected ionic liquids was chosen to provide a comprehensive study of the influence of the cation alkyl chain length, the number of cation substitutions and the anion on the properties under study. The influence of water content in the surface tension was studied for several ILs as a function of the temperature as well as a function of water mole fraction, for the most hydrophobic IL investigated, [omim][PF(6)], and one of the more hygroscopic IL, [bmim][PF(6)]. The surface thermodynamic functions such as surface entropy and enthalpy were derived from the temperature dependence of the surface tension values.     

Copper acetylacetonate anchored onto amine-functionalised clays

Copper (II) acetylacetonate was immobilised directly onto two clays, laponite (Lap) and K10-montmorillonite (K10), and after their amine functionalisation with (3-aminopropyl)triethoxysilane (APTES). All the materials were characterised by nitrogen adsorption isotherms at -196 degrees C, elemental analysis, TG-DSC, XRD, and IR spectroscopy. The K10-based materials were also characterised by XPS. The APTES-functionalised K10 showed higher copper loading than K10, indicating that the clay functionalisation enhanced the complex immobilisation; on the contrary, in Lap-based materials higher metal content was obtained by direct complex anchoring, probably due to the delaminated nature of Lap which induced the particles aggregation on functionalisation with APTES. All the results pointed out that the Cu complex was anchored onto the amine-functionalised clays by Schiff condensation between the amine groups of anchored APTES and the carbonyl groups of the acetylacetonate ligand, whereas direct immobilisation proceeded mostly through interaction between the metal centre and the clay surface hydroxyl groups.     

Palladium(II)-allyl complexes containing chiral N-donor ferrocenyl ligands

A study of the reactivity of enantiopure ferrocenylimine (S_C)-[FcCHN-CH(Me)(Ph)] {Fc =  (η⁵-C₅H₅)Fe{(η⁵-C₅H₄)-} (1a) with palladium(II)-allyl complexes [Pd(η³-1R¹,3R²-C₃H₃)(μ-Cl)]₂ {R¹ = H and R² = H (2), Ph (3) or R¹ = R² = Ph (4)} is reported. Treatment of 1a with 2 or 3 {in a molar ratio Pd(II):1a = 1} in CH₂Cl₂ at 298 K produced [Pd(η³-3R²-C₃H₄){FcCHN-CH(Me)(Ph)}Cl] {R² = H (5a) or Ph (6a)}. When the reaction was carried out under identical experimental conditions using complex 4 as starting material no evidence for the formation of [Pd(η³-1,3-Ph₂-C₃H₃){FcCHN-CH(Me)(Ph)}Cl] (7a) was found. Additional studies on the reactivity of (S_C)-[FcCHN-CH(R³)(CH₂OH)] {R³ = Me (1b) or CHMe₂ (1c)} with complex 4 showed the importance of the bulk of the substituents on the palladium(II) allyl-complex (2-4) or on the ferrocenylimines (1) in this type of reaction. The crystal structure of 5a showed that: (a) the ferrocenylimine adopts an anti-(E) conformation and behaves as an N-donor ligand, (b) the chloride is in acis-arrangement to the nitrogen and (c) the allyl group binds to the palladium(II) in a η³-fashion. Solution NMR studies of 5a and 6a and [Pd(η³-1,3-Ph₂-C₃H₃){FcCHN-CH(Me)(CH₂OH)}Cl] (7b) revealed the coexistence of several isomers in solution. The stoichiometric reaction between 6a and sodium diethyl 2-methylmalonate reveals that the formation of the achiral linear trans-(E) isomer of Ph-CHCH-CH₂Nu (8) was preferred over the branched derivative (9). A comparative study of the potential utility of ligand 1a, complex 5a and the amine (S_C)-H₂N-CH(Me)(Ph) (11) as catalysts in the allylic alkylation of (E)-3-phenyl-2-propenyl (cinnamyl) acetate with the nucleophile diethyl 2-methylmalonate (Nu⁻) is reported.     

Cu(I) catalysed cyclopropanation of olefins: Stereoselectivity studies with Arylid-Box and Isbut-Box ligands

In our quest to find new ligands for highly stereoselective reactions, we tested a variety of chiral non-racemic pseudo-C₂ symmetric bis-oxazolines derived from malonic acid containing an arylidene bridge unit (and appropriately termed Arylid-Box) in the catalytic asymmetric cyclopropanation (CAP) reaction of styrene and ethyl diazoacetate using between only 1-2 mol% of a Cu(I) pre-catalyst. Some very good e.e.s (up to 86%), were obtained. It was possible to isolate 10a′-[Cu(CH₃CN)₄]PF₆ which existed as a bench stable solid that proved to be more efficient than the catalyst prepared in situ. Cu(I) pre-catalysts were used for the first time in the CAP reaction with the Isbut-Box ligands 13a and 13b and, although, the e.e.s were better for ligand 13a using these pre-catalysts, in the case of ligand 11b this was not the case. Spectroscopic studies (UV-Vis and ¹H NMR) were carried out to gain an insight into the nature of the catalytic species at work so that the conditions could be optimised giving better results. Some theoretical studies were conducted to try to explain the better enantioselectivities obtained using Evans’ tert-Box-Cu(I) complex over our complex.     

Photoinduced electron transfer in a hexaphenylbenzene-based self-assembled porphyrin-fullerene triad

A hexaphenylbenzene-based zinc porphyrin dyad forms a 1:1 complex with a fullerene bearing two pyridyl groups via coordination of the pyridyl nitrogens with the zinc atoms. The fullerene is symmetrically located between the two zinc porphyrins. The binding constant for the complex is 7.3 x 10(4) M(-1) in 1,2-difluorobenzene. Photoinduced electron transfer from a porphyrin first excited singlet state to the fullerene occurs with a time constant of 3 ps, and the resulting charge-separated state has a lifetime of 230 ps. This self-assembled construct should form a basis for the construction of more elaborate model photosynthetic antenna-reaction center systems.     

Stereoselective quaternization of alpha-amino phenylacetonitriles mediated by a remote sulfinyl group

Enantiomerically pure alpha-substituted alpha-amino phenylacetonitriles have been readily prepared from 2-p-tolylsulfinylbenzaldimines following a two-step sequence: a moderately stereoselective hydrocyanation of the imines and a completely stereoselective quaternization of the resulting diastereoisomeric mixture of alpha-amino phenylacetonitriles with different alkylating or acylating reagents in the presence of KHMDS. Theoretical calculations support a stereoselectivity control exerted by the remote sulfinyl group, as long as it is responsible for the conformational preferences of the benzyllithium intermediates, which suffer the attack of the electrophiles to the less hindered diastereotopic face.     

IPy2BF4/HF-pyridine: a new combination of reagents for the transformation of partially unprotected thioglycosides and n-pentenyl glycosides to glycosyl fluorides

The combination of bis(pyridinium)iodonium (I) tetrafluoroborate (IPy2BF4), and hydrogen fluoride pyridine (HF-py) forms an iodine monofluoride (IF) synthetic equivalent that can be used in the preparation of partially unprotected glycosyl fluorides from partially unprotected n-pentenyl glycosides and thioglycosides, thus avoiding the need for the protection/deprotection steps normally required in that transformation.