Investigation of the turbulent mixing of thin layers of materials of different density during the laser acceleration of flat multilayer targets in the Iskra-4 facility

The results of the first experiments devised to investigate the mixing of thin layers of Al and Au during the laser acceleration of flat three-layer targets of Si (5 μm), Al (2 μm), and Au (0.05–0.26 μm) by radiation converted to the second harmonic from the Iskra-4 iodine laser with an intensity of 4×10¹³−7×10¹³ W/cm² (τ _0.5∼1 ns), which acts on the Si side of the target. A method for detecting the occurrence of mixing is developed. It is established that under the experimental conditions the thickness of the mixing region is at least ∼0.15 μm. The results of a theoretical analysis of the evolution of the disturbances leading to mixing are presented. Zh. éksp. Teor. Fiz. 111, 882–888 (March 1997) Deceased.     

Edge-enhanced imaging with polyvinyl alcohol/acrylamide photopolymer gratings

We demonstrate edge-enhanced imaging produced by volume phase gratings recorded on a polyvinyl alcohol/acrylamide photopolymer. Bragg diffraction, exhibited by volume gratings, modifies the impulse response of the imaging system, facilitating spatial filtering operations with no need for a physical Fourier plane. We demonstrate that Kogelnik's coupled-wave theory can be used to calculate the transfer function for the transmitted and the diffracted orders. The experimental and simulated results agree, and they demonstrate the feasibility of our proposal.     

Bending loss measurement using a fiber cavity ringdown scheme

A novel sensitive technique for the determination of losses in fiber cavities is presented. The method is based on the cavity ringdown scheme implemented in silica-based single-mode fibers. Bending losses of fiber cavities of different lengths have been measured showing all an oscillating behavior with respect to the curvature radius of the fiber as predicted by a theoretical model. The best minimum detectable absorbance per cavity pass achieved by this new method is 1.72×10⁻³ dB within a 10 m-long cavity. This limit suffices well for an accurate determination of optical bending losses even in bend-insensitive fibers. Furthermore, the comparison of the measured bending losses with a theoretical model allows the extraction of different fiber parameters. Good agreement has been found between the experimentally derived parameters and literature data.     

Uptake of Europium(III) from Water using Magnetite Nanoparticles

It is demonstrated that colloidal magnetite nanoparticles can be used as nanosorbents for lanthanide ions dissolved in water. In particular, a series of experiments are performed for the removal of Eu(III) in distinct analytical conditions and by applying an external magnet to collect the sorbents previously dispersed in water samples. Furthermore, strategies for surface chemistry functionalization are also investigated, aiming to investigate the effect of this parameter on the removal capacity of the Fe₃O₄ nanoparticles. The supernatant solutions are monitored for the remaining amount of Eu(III) by fluorescence emission measurements in the presence of 2,6‐pyridinedicarboxylic acid as a sensitizer. The results demonstrate that neat Fe₃O₄ nanoparticles are capable of capturing lanthanide ions (III) from aqueous solutions (pH 7), without need of surface modification, and for subsequent removal by magnetic separation. During the removal, efficiency is increased after modifying the particles' surfaces with silica and 3‐aminopropyltrimethoxysilane; in alkaline medium (pH 10), there is complete removal regardless the type of nanosorbent used. This has been explained by the formation of insoluble Eu(III) species that adsorb strongly to the nanosorbents surfaces allowing their subsequent magnetic separation.     

Discrete and selective absorption in crystalline molecular nanofilms

Recent research in nano-optical engineering and in nanomedicine as well, seeks for methods of construction of various types of nano-markers, nano-carriers, and ways to deliver drugs to the exactly determined regions of body. In this process it is important to find methods of recognition of certain types of molecules. It is obvious that optical recognition would be the easiest and the most effective way to do it. Our research presents a model of a molecular ultrathin crystalline film and generated exciton system inside it and corresponding methodology of analysis of their optical characteristics. Properties of these spatially very restricted structures are very sensitive to their surrounding surfaces. Using the two-time Green’s functions adapted for crystalline structures with symmetry breaking, and graphical-numerical software, we have calculated the energy spectra and possible exciton states. We have shown that the appearance and the presence of localized states on the surfaces and in the boundary layers of the film depend on the thickness of the film and the film surroundings, presented through the perturbation of parameters on surfaces. Optical properties in these structures demonstrate discrete and very selective resonant absorption spectra, depending on the perturbation on their surfaces.     

Dynamics of water adsorption on TiO2 monitored by work function spectroscopy

Water adsorption dynamics on two TiO₂ (1 1 0) rutile surfaces at room temperature has been investigated using the work function (WF) change as a function of time. The first surface was prepared in a standard way using sputtering/annealing cycles, whereas the second one was long term annealed at 620 K in moderate vacuum conditions (the residual gas pressure of about 1 × 10⁻⁷ mbar) and cleaned afterwards. The WF change show striking difference as compared to those obtained for highly reduced TiO₂ (1 1 0) rutile or the (2 × 1) reconstructed surfaces. For the first kind of surface we show that the observed adsorption dynamics can be qualitatively explained by the present understanding of the water adsorption on non-reconstructed TiO₂ (1 1 0) rutile surface according to which the bridging oxygen vacancies and Ti rows are the main adsorption sites. Although generally similar to the former results, water adsorption dynamics on the second kind of the surface has an additional feature that can be only explained by a new adsorption site, which we suggest to be due to (2 × 1) reconstructed regions coexisting with the non-reconstructed TiO₂ (1 1 0) surface.     

Biolabeling with nanoparticles based on Y2O3: Nd and luminescence detection in the near-infrared

Neodymium based fluorescence presents several advantages in comparison to conventional rare earth or enzyme-substrate based fluorescence emitting sources (e.g.Tb, HRP) . Based on this fact we have herein explored a Nd-based fluoroimmunoassay. We efficiently detected the presence of an oxidized low-density lipoprotein (oxLDL) in human plasma a well-known marker for cardiovascular diseases, which causes around 30% of deaths worldwide. Conventional fluoroimmunoassay uses time-resolved luminescence techniques, with detection in the visible range, to eliminate the fluorescence background from the biological specimens. By using an immunoassay based on functionalized Y₂O₃:Nd³⁺ nanoparticles, where the excitation and emission processes in the Nd³⁺ ion occur in the near-infrared (NIR) region, we have succeeded in eliminating the interferences from the biological fluorescence background, avoiding the use of time-resolved techniques. This yields higher emission intensity from the Nd³⁺-nanolabels and efficient detection of anti-oxidized low-density lipoproteins (anti-oxLDL) by Y₂O₃:Nd³⁺-antibody-antigen conjugation, leading to a novel biolabeling method.     

Pulsed arterial spin labeling perfusion imaging at 3 T: estimating the number of subjects required in common designs of clinical trials

Pulsed arterial spin labeling (PASL) is an increasingly common technique for noninvasively measuring cerebral blood flow (CBF) and has previously been shown to have good repeatability. It is likely to find a place in clinical trials and in particular the investigation of pharmaceutical agents active in the central nervous system. We aimed to estimate the sample sizes necessary to detect regional changes in CBF in common types of clinical trial design including (a) between groups, (b) a two-period crossover and (3) within-session single dosing. Whole brain CBF data were acquired at 3 T in two independent groups of healthy volunteers at rest; one of the groups underwent a repeat scan. Using these data, we were able to estimate between-groups, between-session and within-session variability along with regional mean estimates of CBF. We assessed the number of PASL tag-control image pairs that was needed to provide stable regional estimates of CBF and variability of regional CBF across groups. Forty tag-control image pairs, which take approximately 3 min to acquire using a single inversion label delay time, were adequate for providing stable CBF estimates at the group level. Power calculations based on the variance estimates of regional CBF measurements suggest that comparatively small cohorts are adequate. For example, detecting a 15% change in CBF, depending on the region of interest, requires from 7-15 subjects per group in a crossover design, 6-10 subjects in a within-session design and 20-41 subjects in a between-groups design. Such sample sizes make feasible the use of such CBF measurements in clinical trials of drugs.