Simple and efficient one-pot solvent-free synthesis of N-methyl imines of aromatic aldehydes

A one-pot solvent-free synthesis of N-methyl imines in good to excellent yields was performed by grinding together aromatic aldehydes and methylamine hydrochloride in the presence of a base. The best yields were achieved when an excess of methylamine hydrochloride and inexpensive sodium hydrogen carbonate was used (usually in a molar ratio ArCHO/CH₃NH₂·HCl/NaHCO₃ = 1:5:5), allowing the reaction to proceed for 1 h (in the case of aromatic aldehydes containing electron-withdrawing substituents) or overnight (in the case of electron-rich aldehydes). After a simple work-up (extraction with diethyl ether) the obtained products were mostly pure enough for spectral characterization. In this way, 31 N-methyl imines were prepared, among which eight were synthesized for the first time. Their structures were elucidated by spectral means (¹H- and ¹³C-NMR, IR, MS) whenever it was possible. In the case of salicylaldehyde and 4-chlorobenzaldehyde, the synthesis of the corresponding imines was also conducted on a gram-scale with a 72% and 84% isolated yield, respectively. The present approach not only provides good to high yields, but also eliminates the disadvantages of the traditional synthesis of N-methyl imines, such as the use of hazardous solvents and more or less expensive catalysts and the necessity of work/handling with an anhydrous gas in pressurized containers.     

Gas chromatography–triple-quadrupole mass spectrometry for analysis of selected polyhalogenated pollutants in plants. Comparison of extraction methods

Different extraction methods, followed by gas chromatography coupled to triple quadrupole mass spectrometry, were evaluated for simultaneous extraction of seven polychlorinated biphenyls (PCBs) and six polybrominated diphenyl ethers (PBDEs) from common weeds. Pressurized liquid extraction (PLE) with in-cell clean-up, ultrasound-assisted extraction (UAE) with in-column clean-up, and UAE with dispersive solid-phase extraction (dSPE) clean-up were evaluated and compared. In-cell clean-up with 4 g Florisil and 0.5 g graphitized carbon black (GCB) and two extraction cycles of 10 min with n-hexane–ethyl acetate 80:20 (v/v) at 60 °C were used for the PLE procedure. UAE with in-column clean-up was conducted under conditions similar to those reported for the PLE method whereas in UAE with dSPE clean-up purification of the extract was performed after extraction using primary and secondary amine sorbent (PSA) and GCB. Recovery from 82 to 104 % was obtained for all the compounds by PLE whereas, in general, lower extraction efficiency was obtained by UAE with in-column clean-up (especially for BDE-17 and BDE-183, for which recovery was 70 and 41 %, respectively) and by UAE with dSPE clean-up, for which the main drawback is that BDE-183 cannot be extracted. Finally, PLE was used for analysis of PCBs and PBDEs in different plants (Lolium rigidum, Lactuca serriola, Malva sylvestris, and Verbascum thapsus) collected from residential and/or rural areas of Madrid (Spain). Several of the analyzed compounds were detected at low levels in these plants, but only PCB-153 could be quantified.

Use of Cdse/ZnS quantum dots for sensitive detection and quantification of paraquat in water samples

Based on the highly sensitive fluorescence change of water-soluble CdSe/ZnS core-shell quantum dots (QD) by paraquat herbicide, a simple, rapid and reproducible methodology was developed to selectively determine paraquat (PQ) in water samples. The methodology enabled the use of simple pretreatment procedure based on the simple water solubilization of CdSe/ZnS QDs with hydrophilic heterobifunctional thiol ligands, such as 3-mercaptopropionic acid (3-MPA), using microwave irradiation. The resulting water-soluble QDs exhibit a strong fluorescence emission at 596 nm with a high and reproducible photostability. The proposed analytical method thus satisfies the need for a simple, sensible and rapid methodology to determine residues of paraquat in water samples, as required by the increasingly strict regulations for health protection introduced in recent years. The sensitivity of the method, expressed as detection limits, was as low as 3.0 ng L⁻¹. The lineal range was between 10–5 × 10³ ng L⁻¹. RSD values in the range of 71–102% were obtained. The analytical applicability of proposed method was demonstrated by analyzing water samples from different procedence.     

Screening for exogenous androgen anabolic steroids in human hair by liquid chromatography/orbitrap-high resolution mass spectrometry

A method for the screening of various anabolic steroids and their esters in human hair, based on liquid-chromatography–high resolution mass spectrometry using an Exactive benchtop Orbitrap mass spectrometer, has been set up and validated. This method involved methanolic incubation of 30 mg of hair and analysis of the relevant extract in HPLC using a C18 column. The mass detector, with nominal resolving power of 100,000, operated in full scan mode in APCI under positive ionization mode. Analytes were identified by exact mass, correspondence of isotopic cluster and retention times.     

Fragrance encapsulation in polymeric matrices by emulsion electrospinning

We present the successful application of emulsion electrospinning for the encapsulation of a model for highly volatile fragrances, namely (R)-(+)-limonene in a poly(vinyl alcohol) (PVA) fibrous matrix. The influence of the emulsion formulation and of its colloidal properties on the fiber morphology, as well as on the limonene encapsulation efficiency, is described. The release profile of the fragrance from the electrospun nanofibers over a fifteen days range shows that this type of nanofibrous matrices with a high fragrance loading capacity is of great potential for applications in various fields, such as cosmetics or food packaging.     

Palladium-Catalysed Couplings of Halofurans with Activated Alkenes and Terminal Alkynes. A Short Synthesis of Dihydrowyerone

The palladium-catalysed coupling of bromofurans with activated alkenes and of furanoyl chlorides with either terminal alkynes or alkynyl stannanes gave good yields of the corresponding vinyl furans and alkynyl ketones. These studies culminated in a short synthesis of the antifungal agent dihydrowyerone.     

New Efficient Synthesis of 1-Aminocyclopropanecarboxylic Acid (ACC)

A new efficient synthesis of 1-aminocyclopropanecarboxylic acid (ACC) from methyl 2-diphenylmethyleneaminoacrylate in nearly quantitative yield has been developed. The key step in the synthesis is the removal of both protecting groups in mild conditions and in quantitative yield to afford ACC.     

Study of the degradation of a new PLA braided biomaterial in buffer phosphate saline,basic and acid media,intended for the regeneration of tendons and ligaments

The purpose of this study was to evaluate the effects of hydrolytic degradation on the properties of a PLA hollow braid designed as a new concept of biodegradable prosthesis for the regeneration of tendons and ligaments. The main function of the braided material is to bear mechanical loads while it is being replaced by the newly-generated tissue. The kinetics of braided material degradation is thus an important factor in determining the success of the product. In order to study this mechanism, PLA braid was subjected to a 12-month degradation process at 37 °C in PBS at pH 7.4 (to simulate the human physiological medium) and to accelerated degradation for one month in pH 12 and pH 3 solutions. Degradation of the braid subjected to hydrolysis was evaluated by weight loss, molecular weight distribution, mechanical properties, and calorimetric and morphologic analyses. The weight loss in a basic medium reached 21%, versus no significant change in the other media. Average molecular weight was reduced by approximately 50% in the three media, with loss of mechanical properties in all cases. The morphological changes were more evident in the PLA degraded in the basic medium. The crystallinity of the material increased at the first stages of degradation, regardless of the medium used.     

THE INTERACTION OF WATER SOLUBLE MEAT PROTEINS WITH MONO-GLYCERIDE AND DIGLYCERIDE AT THE CORN OIL-WATER INTERFACE ANDITS EFFECTONTIME-DEPENDENT INTERFACIALTENSION REDUCTION.

The influence of water soluble meat protein (WSMP) /glyceryl monostearate/glyceryl distearate ratio on the time-dependent reduction of interfacial tension at the corn oil-water Interface has been investigated at pH's 2.5, 3.5 and 9.5.The total WSMP-glycerides content was kept constant at 1.0% wt/wt. Both variables had an effect, with maximum reduction in the steady state interfacial tension occurring when using 0.5% WSMP in conjunction with 0.5% glycerides (monoglyceride/diglyceride ratio 3/1) at pH 3.5.Under these conditions the WSMP and glycerides associate to form a complex at the interface. At other WSMP/glycerides ratios the interfacial film has a more heterogeneous composition,.     

Copper-containing dendromesogens: the influence of the metal on the mesomorphism

The synthesis and liquid crystalline behaviour of the first and second generations of a dendrimeric structure based on poly(propyleneimine)(DAB-dendr(NH₂)_x) are reported. 4-(4-n-Alkoxybenzoyloxy)salicylaldehydes are used as mesogenic moieties attached at the peripheral amino groups of the dendrimers giving rise to dendromesogens with four and eight mesogenic branches. From these dendromesogens, considered as organic ligands, were prepared six metal-containing dendrimers which incorporate two or four copper atoms in their structures. All the dendrimeric ligands and three of the metal-containing dendrimers exhibit liquid crystalline properties which were studied by optical microscopy, DSC, X-ray diffraction and EPR spectroscopy.