Li2、LiH的激发态和Li2H的基态结构与势能函数

使用“对称性匹配簇-组态相互作用”方法,对Li2分子三重态的第一激发态、LiH分子的基态、单重态的第一和第二激发态的几何构型与谐振频率进行了优化计算.利用“群操作求和”方法分别对这4个态进行单点能扫描计算,并拟合出了相应各态的Murrell-Sorbie势能函数.使用多种方法对Li2H分子的基态结构进行优化,并用优选出的密度泛函(B3P86)方法对该分子进行了进一步的频率计算.结果发现Li2H分子的基态稳态结构为C2v构型,在此基础上用多体项展式理论导出了它的解析势能函数,其等值势能图准确再现了Li2H分子的结构特征和离解能.首次报导了该分子对称伸缩振动等值势能图中存在的两个对称鞍点,对应于反应LiH Li→Li2H,活化能大约为18.7×4.184 KJ/mol.     

A potential integration method for Birkhoffian system

This paper is intended to apply the potential integration method to the differential equations of the Birkhoffian system. The method is that, for a given Birkhoffian system, its differential equations are first rewritten as 2n first-order differential equations. Secondly, the corresponding partial differential equations are obtained by potential integration method and the solution is expressed as a complete integral. Finally, the integral of the system is obtained.     

掺Yb3+双包层大模场面积光纤锁模激光器

报道了一种结构简单、运转稳定并可以输出高脉冲能量的被动锁模光纤激光器.激光器的增益介质为掺Yb³⁺双包层大模场面积光纤,具有非常低的非线性系数.利用非线性偏振旋转效应和半导体可饱和吸收镜结合实现自启动锁模,获得了平均功率为160mW、重复频率为55.9MHz(对应于3nJ的单脉冲能量)、脉冲宽度为10.6ps的激光脉冲输出. 关键词： 大模场面积光纤 光纤激光器 锁模     

Quantum state sharing of an arbitrary qudit state by using nonmaximally generalized GHZ state

We present a scheme for quantum state sharing of an arbitrary qudit state by using nonmaximally entangled generalized Greenberger-Horne-Zeilinger （GHZ） states as the quantum channel and generalized Bell-basis states as the joint measurement basis. We show that the probability of successful sharing an unknown qudit state depends on the joint measurements chosen by Alice. We also give an expression for the maximally probability of this scheme.     

A scribing laser marking system using DSP controller

Laser marking is an important branch of laser processing technology, and has been widely used in many fields of industry. Digital signal processor (DSP) is an incredibly fast and powerful microprocessor that can deal with signals in real time. Not only it is portable but has the ability to integrate the processing signals of subsystems. In this research, it is emphasized that we designed a scribing laser marking system based on a DSP in galvanometric marking method. To control the rotating angle of the galvanometric scanning mirrors more accurately, we combine the D/A converter of the DSP with the human–machine interface successfully. The whole marking system is not only inexpensive, but also miniaturized.     

惯性约束聚变中环孔编码图像恢复的改进维纳滤波方法

针对惯性约束聚变(ICF)中环形孔径编码图像的恢复问题提出了一种改进的维纳滤波方法。在传统的维纳滤波方法中,由于原图像和噪声是未知的,故通常是用某一待定常量来代替其中的噪声与信号的谱密度之比。这种近似忽视了信号与噪声本身的信息,从而造成丢失某些关键的细节,难以达到高质量的图像复原效果。在改进的方法中,首先采用传统维纳滤波方法求得初始估值,然后利用该初始值求得原图像及噪声的谱密度估值,进而利用这些新获得的信息构成改进的维纳滤波器对退化图像进行第二次滤波。实验表明,这种改进方法可以克服原方法的不足,突出图像的一些关键细节,提高图像的整体质量。在仿真实验中,恢复图像的均方误差降低了15％以上;在实际惯性约束聚变图像的解码恢复实验中,图像恢复效果亦有显著改善。该方法还可以推广到其他图像恢复的应用中。     

增量维纳滤波法在波前探测解卷积中的应用

一个常规的自适应光学系统通常包含三个重要环节：波前探测、波前校正和波前重构。因此对系统的技术要求非常高,造成系统复杂,成本昂贵。基于哈特曼-夏克波前探测的图像解卷积处理就是“事后”处理的一种,它省去了波前校正环节,使常规的自适应光学系统得到简化,降低了系统成本。其基本原理为对瞬时波面进行短时间曝光探测,同时记录相应的短时间曝光图像,来进行解卷积处理。将增量维纳滤波法应用于基于哈特曼-夏克波前探测的解卷积中,并对室内模拟点源情况下的三组畸变光斑图像数据进行了解卷积恢复处理。结果表明,将增量维纳滤波法应用于基于波前探测的解卷积是完全可行的,在室内模拟点源情况下,恢复的图像可以达到衍射极限分辨力。与维纳滤波相比,它扩展了噪声抑制因子的选取范围,在噪声抑制因子选取不正确的情况下,仍能得到比维纳滤波更好的结果。     

Study of Ti/Au,Ti/Al/Au,and Ti/Al/Ni/Au ohmic contacts to <Emphasis Type="Italic">n</Emphasis>-GaN

The contacts of Ti/Au, Ti/Al/Au, and Ti/Al/Ni/Au films deposited on n-GaN were studied by current–voltage (I–V) and transmission-line-method measurements. The effect of annealing temperature on specific contact resistivity has been investigated by changing the annealing temperature from 400 to 900 °C. Ti/Al/Au and Ti/Al/Ni/Au films were superior to the bilayer (Ti/Au) in ohmic contact characteristics and thermal stability. The Ti/Al/Ni/Au composite showed the best thermal stability due to the fact that Ni plays a more important role than the alloy of Ti/Al in preventing the interdiffusion of Ti, Al, and Au. The lowest contact resistivity (10^-7cm²) to n-GaN was obtained for the Ti/Al/Ni/Au sample by short-time/high-temperature annealing. The formation mechanism of ohmic contacts to n-GaN is also discussed. PACS 73.40.Cg; 73.61.Ey     

3,7-二硝基亚氨基-2,4-二氮杂双环[3,3,0]辛烷的放热分解反应动力学

在程序升温条件下 ,用DSC研究了标题化合物的放热分解反应动力学 .用线性最小二乘法、迭代法以及二分法与最小二乘法相结合的方法 ,以积分方程、微分方程和放热速率方程拟合DSC数据 .在逻辑选择建立了微分和积分机理函数的最可几一般表达式后 ,用放热速率方程得到相应的表观活化能 (Ea)、指前因子 (A)和反应级数 (n)的值 .结果表明 :该反应的微分形式的经验动力学模式函数、Ea 和A值分别为 (1-α) 0 .44、2 30 .4kJ/mol和 10 18.16s-1.借助加热速率和所得动力学参数值 ,提出了标题化合物放热分解反应的动力学方程 .该化合物的热爆炸临界温度为 30 2 .6℃ .上述动力学参数对分析、评价标题化合物的稳定性和热变化规律十分有用 .     

Coaxial ZnO/SiO<Subscript>2</Subscript> nanocables fabricated by thermal evaporation/oxidation

ZnO/SiO₂ coaxial nanocables have been synthesized on silicon substrates by simply evaporating zinc powder under an argon and argon/oxygen mixed atmosphere sequentially. The diameters of these nanocables vary from 50 to 100 nm and the lengths up to several millimeters. Electron microscopy and chemical composition investigations reveal that the nanocable consists of a crystalline ZnO core surrounded by an amorphous silica sheath. The electron diffraction pattern proves that the long-axis direction of ZnO cores grows along the [0001] direction. Silica nanotubes with wall structures have been obtained by the selective dissolution of the cores with hydrochloric acid. PACS 81.10.Bk; 81.05.Hd