用光刺激放电法研究纳米粉末掺杂低密度聚乙烯中陷阱能级

通过光刺激放电(PSD)技术研究了纳米粉末掺杂低密度聚乙烯(LDPE)中的陷阱能级.利用连续扫描法得到了不同掺杂比例的Al₂O₃,MgO纳米粉末掺杂试样以及相同掺杂比例的多种纳米粉末掺杂试样的PSD电流谱,定性地得出了试样陷阱能级的深浅变化.分步扫描法定量地描述了LDPE试样在Al₂O₃纳米掺杂前后陷阱能量分布的变化.结果表明,掺杂比例大于0.2%的Al₂O₃纳米粉末掺杂、大于0.5%的MgO纳米粉末掺杂能够显著地使得LDPE陷阱能级变深.结合纳米掺杂对LDPE空间电荷注入影响的相关报道,可推测纳米掺杂对空间电荷注入的抑制与试样中陷阱能级变深存在密切的关联.     

Interaction between graphene and the surface of SiO2

The interaction between graphene and a SiO(2) surface has been analyzed with first-principles DFT calculations by constructing the different configurations based on α-quartz and cristobalite structures. The fact that single-layer graphene can stay stably on a SiO(2) surface is explained based on a general consideration of the configuration structures of the SiO(2) surface. It is found that the oxygen defect in a SiO(2) surface can shift the Fermi level of graphene down which opens up the mechanism of the hole-doping effect of graphene adsorbed on a SiO(2) surface observed in a lot of experiments.     

Shadow effects in simulated ultrasound images derived from computed tomography images using a focused beam tracing model

Simulation of ultrasound images based on computed tomography (CT) data has previously been performed with different approaches. Shadow effects are normally pronounced in ultrasound images, so they should be included in the simulation. In this study, a method to capture the shadow effects has been developed, which makes the simulated ultrasound images appear more realistic. The method using a focused beam tracing model gives diffuse shadows that are similar to the ones observed in measurements on real objects. Ultrasound images of a cod (Gadus morhua) were obtained with a BK Medical 2202 ProFocus ultrasound scanner (BK Medical, Herlev, Denmark) equipped with a dedicated research interface giving access to beamformed radio frequency data. CT images were obtained with an Aquilion ONE Toshiba CT scanner (Toshiba Medical Systems Corp., Tochigi, Japan). CT data were mapped from Hounsfield units to backscatter strength, attenuation coefficients, and characteristic acoustic impedance. The focused beam tracing model was used to create maps of the transmission coefficient and scattering strength maps. Field II was then used to simulate an ultrasound image of 38.9 × 55.3 × 4.5 mm, using 10(6) point scatterers. As there is no quantitative method to assess quality of a simulated ultrasound image compared to a measured one, visual inspection was used for evaluation.     

103 W in-band dual-end-pumped Ho:YAG laser

An efficient 2?μm in-band pumped Ho:YAG laser was demonstrated. The resonator involves two Ho:YAG crystals, each of which was dual-end-pumped by two orthogonally polarized diode-pumped Tm:YLF lasers. The maximum continuous wave output power of 103?W was achieved, corresponding to a slope efficiency of 67.8% with respect to the incident pump power and an optical-to-optical conversion efficiency of 63.5%. Under Q-switched mode, we obtained 101?W laser output at 30?kHz, corresponding to a slope efficiency of 66.2%. The beam quality or M² factor was found to be less than 2.     

A finite element model using multi-layered shell element in laser forming

Due to its enormously high flexibility laser forming has been gaining importance in recent years. This rapidness and flexibility demand very precise controlling strategies especially when simulating the process of large plates and challenging the limited computation power of the current workstation. A simple, robust and accurate modeling method of laser forming has been demonstrated to solve this problem. The simplified model is meshed by multi-layered shell element, simulated with a more real scanning method and fewer parameters. The intelligent meshing strategies have reduced the number of elements dramatically. Thus the simulation efficiency has been improved significantly. By comparing the simulation results under the simplified model with the results under the traditional model for laser forming, the applicability of proposed method has been proven. The method of these simplified models is also suitable to simulate complex finite element models, which take much time to simulate. It would throw some light on the thermal mechanically coupled-field simulation of large sheet.     

掺铁铌酸锂晶体中光致散射的锂组分和温度依赖关系研究

研究了单掺铁铌酸锂晶体的光致散射行为随锂组分以及温度的变化关系.实验表明,随晶体组分的升高,光致散射得到了大幅抑制;不同组分晶体光致散射被完全抑制的温度不同.由此提出掺铁铌酸锂晶体在48.9 mol%-49.3 mol%范围内可能存在一临界锂组分,当晶体组分超过这一临界组分时,晶体光致散射被大幅抑制,而光致散射行为的温度依赖关系明显改变.     

Nature of the high-pressure transition in Fe2O3 hematite

We present a new method to separate the crystallographic and electronic phase transitions in hematite using x-ray emission spectroscopy and x-ray diffraction. Our observations, based on the behavior of a metastable high-pressure phase in the stability domain of the low-pressure phase, show that the electronic transition is preempted by the crystallographic transition. The former occurs only afterwards in the high-pressure phase, possibly as a result of a Mott transition. The idea that the electronic transition drives the transition in hematite is therefore invalidated. Such methods should help elucidate the mechanics and the driving forces behind a number of first-order high-pressure phase transitions.     

单负材料一维光子晶体的透射谱特性

利用传输矩阵法研究了单负材料一维光子晶体(AB)m(ADBDB)n(AB)mA的透射谱,发现:透射谱中出现2个共振隧穿模,其位置和间距可由周期数m或n,以及介质层厚度d调节控制。改变m,会出现2个恒定间距的共振隧穿模;改变dA,共振隧穿模间距增大,且当dA≥25mm时,间距增大加剧;改变n,共振隧穿模逐渐趋于简并,当n≥6时,两隧穿模合二为一;改变dD,两共振隧穿模亦逐渐趋于简并,当dD≥20mm时,两隧穿模亦合二为一。这些特性可为利用光子晶体设计可调性高品质单通道、双通道滤波器提供参考。     

Shape-dependent local internal stress of α-Cr2O3 nanocrystal fabricated by pulsed laser ablation

The α-Cr₂O₃ single-crystal nanocondensates were fabricated by pulsed laser ablation in air and characterized by analytical electron microscopy regarding shape-dependent local internal stress of the anisotropic crystal. The nanocondensates formed predominantly as rhombohedra with well-developed surfaces and occasionally hexagonal plate with thin edges and blunt corners. Such nanocondensates showed Raman shift for the CrO₆ polyhedra, indicating a local compressive stress up to ca. 4 GPa on the average. Careful analysis of the lattice fringes revealed a local compressive stress (0.5% strain) at the thin edge of the hexagonal plates and a local tensile stress (0.3–1.0% strain) near the relaxed , , and (0 0 0 1) surfaces of truncated rhombohedra. The combined effects of nanosize, capillarity force at sharp edge, and specific surface relaxation account for the retention of a local internal compressive stress built up in an anisotropic crystal during a very rapid heating–cooling process.     

He-BH碰撞体系微分截面的理论计算

用公认精确的密耦近似方法计算了入射能量从25至150 meV时,He原子与基态BH分子碰撞的弹性微分截面、非弹性微分截面和总微分截面,进一步讨论了微分截面的变化趋势及特征.计算结果表明：He-BH碰撞体系的总微分截面具有原子与双原子分子散射的一般规律和特征;随着入射能量的增加,低转动激发态-态微分截面在大角区的散射振荡现象会更加明显. 关键词： He-BH复合物 相互作用势 密耦近似 微分截面