Resonant and Stationary Waves in Rotating Disks

The analytical conditions for resonant and stationary waves inrotating disks are presented. These conditions are derived from anonlinear plate theory pertaining to initial configurations and areapplicable to rotating disks with initial waviness and/or undergoinglarge-amplitude displacements. The rotational speeds at which theresonant and stationary waves occur for a 3.5-inch diameter computermemory disk are computed. The resonant waves for linear and nonlinear,rotating disks are simulated numerically. It is found that some diskmodes exhibit a hardening effect under which the rotational speeds forthe resonant and stationary waves increase with increasing waveamplitude, while other modes experience a softening effect with thoserotational speeds decreasing with increasing wave amplitude. Therotating-disk resonant spectrum presented in this paper is relevant tothe disk drive industry for determining the range of operationalrotation speed.     

Speckle characteristics of simulated deep Fresnel region under shadowing effect

After the three-dimensional self-affine fractal random surface simulation, we use the optical scattering theory to calculate the deep Fresnel region speckle(DFRS) under consideration of the more strict shadowing effect. The evolution of DFRS with the scattering distance and the intensity probability distribution are studied. It is found that the morphology of the scatterer has an antisymmetric relationship with the intensity distribution of DFRS, and the effect of micro-lenses on the scattering surface causes the intensity probability distribution of DFRS to deviate from the Gaussian speckle in the high light intensity area.     

Lidar Sensor-Based Object Recognition Using Machine Learning

Journal of Russian Laser Research - Light detection and ranging (LIDAR) sensor provides complicated and large volume of environmental point cloud data that are essential for the target recognition....     

Efficient Ultraviolet Nanosources Based on Third-Harmonic Generation in Dielectric–Metal Composite Nanodisks

Dielectric materials with high indices have recently attracted much attention in the community of nanophotonics. Severe optical losses in visible–ultraviolet (UV) region, however, limit their applications. This article proposes dielectric–metal nanocomposites as alternative high-index materials for Mie-resonance-based applications. Such composite materials have high indices in the range of wavelength longer than plasmon resonance of inclusion metal nanoparticles, while they have much lower losses in the range from blue-violet down to near-UV compared with commonly used high-index materials such as silicon, enabling near-UV generation with high efficiency based on third-harmonic generation (THG). The numerical results show that ZnO nanodisk containing silver nanoparticles can generate near-UV radiation at 351.3 nm via THG with an efficiency about 20 times higher compared with silicon nanodisk under same pumping condition. Significantly high THG efficiency of 0.015% has been predicted with such a composite nanodisk supported by aluminum substrate under pumping with a peak intensity of 20 GW cm⁻², a spot size of 0.8 $\mu \mathrm{m}$, a duration of 50 fs at 1054 nm, respectively.     

Injectable dual glucose-responsive hydrogel-micelle composite for mimicking physiological basal and prandial insulin delivery

For type 1 and advanced type 2 diabetic patients, insulin replacement therapy with simulating on-demand prandial and basal insulin secretion is the best option for optimal glycemic control. However, there is no insulin delivery system yet could mimic both controlled basal insulin release and rapid prandial insulin release in response to real-time blood glucose changes. Here we reported an artificial insulin delivery system, mimicking physiological basal and prandial insulin secretion, to achieve real-time glycemic control and reduce risk of hypoglycemia. A phenylboronic acid(PBA)/galactosyl-based glucose-responsive insulin delivery system was prepared with insulin-loaded micelles embedded in hydrogel matrix. At the hyperglycemic state, both the hydrogel and micelles could swell and achieve rapid glucose-responsive release of insulin, mimicking prandial insulin secretion.When the glucose level returned to the normal state, only the micelles partially responded to glucose and still released insulin gradually. The hydrogel with increased crosslinking density could slow down the diffusion speed of insulin inside, resulting in controlled release of insulin and simulating physiological basal insulin secretion. This hydrogel-micelle composite insulin delivery system could quickly reduce the blood glucose level in a mouse model of type 1 diabetes, and maintain normal blood glucose level without hypoglycemia for about 24 h. This kind of glucose-responsive hydrogel-micelle composite may be a promising candidate for delivery of insulin in the treatment of diabetes.     

Achieving Ultrahigh Molecular Weights with Diverse Architectures for Unconjugated Monomers through Oxygen-Tolerant Photoenzymatic RAFT Polymerization

Achieving well-defined polymers with ultrahigh molecular weight (UHMW) is an enduring pursuit in the field of reversible deactivation radical polymerization. Synthetic protocols have been successfully developed to achieve UHMWs with low dispersities exclusively from conjugated monomers while no polymerization of unconjugated monomers has provided the same level of control. Herein, an oxygen-tolerant photoenzymatic RAFT (reversible addition-fragmentation chain transfer) polymerization was exploited to tackle this challenge for unconjugated monomers at 10 °C, enabling facile synthesis of well-defined, linear and star polymers with near-quantitative conversions, unprecedented UHMWs and low dispersities. The exquisite level of control over composition, MW and architecture, coupled with operational ease, mild conditions and environmental friendliness, broadens the monomer scope to include unconjugated monomers, and to achieve previously inaccessible low-dispersity UHMWs.     

Synthesis and investigation of surface active properties of green glucosyl esters

We here reported on the regioselective biosynthesis of green glucosyl monoesters surfactants which were confirmed by chemical analysis methods using immobilized enzyme catalysis with N-fatty acyl amino acid and D-glucose as substrate. Lipozyme 435 was the most efficient lipase to catalyze the transesterification reaction in t-butanol at 50?°C. The target compounds showed good surface properties. The CMC values of glucosyl esters 15-22 were 4.97, 3.96, 1.87, 0.48?mmol/L, and 4.70, 3.53, 1.58 and 0.42?mmol/L at 25?°C, respectively. It was noteworthy that the micellization physiochemical parameters were calculated and the micellization was exothermic process. Meanwhile, it was entropy driven in the formation of micelles related to the structure of glucosyl esters at different temperature.     

Novel structurally characterized hetero-bimetallic [Zn(II)2M(II)] (M = Ca and Sr) bis(salamo)-type complexes: DFT calculation,Hirshfeld analyses,antimicrobial and fluorescent properties

Two hetero-bimetallic [Zn(II)₂M(II)] (M = Ca and Sr) complexes [Zn₂Ca(L)(OAc)₂] ( 1 ) and [Zn₂Sr(L)(OAc)₂] ( 2 ) with a novel asymmetrical bis(salamo)-type tetraoxime ligand (H₅L) were designed and synthesized, and characterized by elemental analyses, FT-IR spectra, UV–vis absorption spectra, Density Functional Theory (DFT) calculation, Hirshfeld surface analyses and X-ray single crystal diffractions. Compared with the symmetric bis(salamo)-type ligands, the ligand H₅L and its [Zn(II)₂M(II)] (M = Ca and Sr) asymmetrical bis(salamo)-type complexes synthesized for the first time in this paper have more novel structures and better properties. The results of ultraviolet titration show that the coordination ratio of ligand, alkaline earth metal and transition metal is 1:1:2. Complexes 1 and 2 have good luminescent properties and obvious antimicrobial activities.