应用单波段亮度变化率获取无云干扰的卫星数据

在卫星遥感检测中,云对数据的反演带来了严重的干扰。精确地确定云区及减弱云的干扰是具有挑战性的问题。根据云的大气辐射特性给出了卫星图像亮度变化率计算公式、图像反射率的变化率计算公式和热红外波段图像亮度温度变化率的计算方法。利用单波段亮度变化率检测卫星数据中云干扰相对强度的新方法,快速、精确地获取云区位置,得到云区以外无云干扰的数据。根据各光谱波段具有不同的透射云层能力的特点,文章还给出了卫星各红外波段对云层透射能力的客观评价以及影响透射效果的因素。在此基础上利用红外波段对伪卷云透射图像数据完成了多波段数据融合。很好地恢复了可见光波段云区下面的真实数据。统计数据表明,融合后的云区图像数据与可见光波段相关性保持一致。     

数字散斑相关方法及其在碳纤维复合材料压力容器变形测量中的应用

提出了一种新的基于图像灰度梯度迭代的数字散斑相关方法(DSCM,digital speckle correlation method)。通过使用DSCM测量碳纤维复合材料压力容器在水压下的局部区域的位移场和应变场,分析了复合材料压力容器的轴向和环向的变形特征,为碳纤维复合材料压力容器的优化设计提供了理论和实验依据。     

偏振光干涉法消除光纤光栅解调中的交叉敏感现象

提出一种偏振光干涉的光纤光栅应变测量方法,该方法能解决光纤光栅应变和温度测量时的交叉敏感问题。对于钒酸钇晶体偏振光干涉仪,如果选择两个能使干涉仪产生180°相位差的不同中心波长的光纤光栅,一个用于应变测量,一个用于补偿温度,就能很好地解决光纤光栅应变测量时的温度交叉敏感问题。分析了构成偏振光干涉仪的晶体的厚度对应变偏差的影响。理论计算和试验结果显示,当晶体厚度为0.5 mm时温度对应变测量的交叉敏感现象被压缩到了1.6%,相当于0.13με/℃。进一步的仿真分析发现当晶体厚度为0.1 mm时交叉敏感现象将被压缩到0.08%,相当于0.0067με/℃。小的晶体厚度有利于减小交叉敏感现象,但小厚度的晶体加工困难,为此分析了双晶体结构的方案。     

5 TW/40 fs级台式钛宝石激光系统研究

在TSA-25系统输出35 mJ,800 nm啁啾脉冲的基础上,建立了以钛宝石作为增益介质的二级啁啾脉冲放大(CPA)系统。使用0.6 J和1.6 J,532 nm,10 Hz Nd∶YAG激光抽运,输出脉冲能量达到500 mJ,经压缩脉冲宽度为41 fs,压缩器的能量转换效率为63%,峰值功率可达7.6 TW。通过对放大器系统的钛宝石晶体、抽运密度以及多通结构通道数的选择等实验,有效地提高了能量放大器的萃取效率。其主放大器能量萃取效率达到32%,整个系统占用尺寸不到10 m2。     

高折射率椭圆芯布拉格光纤的偏振特性

应用带完全匹配层边界条件的全矢量有限元方法,分析了高折射率椭圆芯布拉格光纤的偏振特性,详细讨论了光纤结构参量对模式双折射度以及群速度走离的影响,结果发现:高折射率椭圆芯布拉格光纤的模式双折射度可达10-2量级,比传统保偏光纤至少高出一个量级,并且表现出不同于传统保偏光纤的群速度走离特性;在保持较高双折射度的同时,通过合理的结构设计,可在一定的波长处灵活地获得较大的群速度走离或零走离特性,具有重要的潜在应用价值;最后,简要分析了低折射率区域的折射率变化对偏振特性的影响;研究结果有助于设计高性能的微结构保偏光纤。     

Multilayer Porous Vanadium Nitride Microsheets Anodes for Highly Stable Na-ion Batteries

Sodiumion batteries(SIBs)have attracted intensive attention as promising alternative to lithium-ionbatteries(LIBs)for large scale energy storage systems because of low cost of sodium,similar energy storage mechanism and the reasonable performance.However,it is still a great challenge to search and design a robust structure of anode materials with excellent cycling stability and high rate capability for SIBs.Herein,multilayer porous vanadium nitride(VN)microsheets are synthesized through a facile and scalable hydrothermal synthesis-nitrogenization strategy as an effective anode material for SIBs.The multilayer porous VN microsheets not only offer more active sites for fast Na+insertion/extraction process and short diffusion pathway,but also effectively buffer the volume change of anode due to more space in the multilayer porous structure.The large proportions of capacitive behavior imply that the Na+charge storage depends on the intercalation pseudocapacitive mechanism.The multilayer porous VN microsheets electrodes manifest excellent cycling stability and rate capability,delivering a discharge capacity of 156.1 mA·h/g at 200 mA/g after 100 cycles,and a discharge capacity of 111.9 mA·h/g at 1.0 A/g even after 2300 cycles with the Coulombic efficiency of nearly 100%.     

Simultaneous Determination of Seven Lipophilic and Hydrophilic Components in Salvia miltiorrhiza Bunge by LC-MS/MS Method and Its Application to a Transport Study in a Blood-Brain-Barrier Cell Model

Salvia miltiorrhiza Bunge (SM) has been extensively used in Alzheimer’s disease treatment, the permeability through the blood-brain barrier (BBB) determining its efficacy. However, the transport mechanism of SM components across the BBB remains to be clarified. A simple, precise, and sensitive method using LC-MS/MS was developed for simultaneous quantification of tanshinone I (TS I), dihydrotanshinone I (DTS I), tanshinone IIA (TS IIA), cryptotanshinone (CTS), protocatechuic aldehyde (PAL), protocatechuic acid (PCTA), and caffeic acid (CFA) in transport samples. The analytes were separated on a C18 column by gradient elution. Multiple reaction monitoring mode via electrospray ionization source was used to quantify the analytes in positive mode for TS I, DTS I, TS IIA, CTS, and negative mode for PAL, PCTA, and CFA. The linearity ranges were 0.1–8 ng/mL for TS I and DTS I, 0.2–8 ng/mL for TS IIA, 1–80 ng/mL for CTS, 20–800 ng/mL for PAL and CFA, and 10–4000 ng/mL for PCTA. The developed method was accurate and precise for the compounds. The relative matrix effect was less than 15%, and the analytes were stable for analysis. The established method was successfully applied for transport experiments on a BBB cell model to evaluate the apparent permeability of the seven components.     

Effects of MN4-Type Coordination Structure in Metallophthalocyanine for Bio-Inspired Oxidative Desulfurization Performance

Oxidative desulfurization (ODS) is the promising new method for super deep desulfurization of fuel oil. The oxidative desulfurization performance of the metal-N₄-chelates metallophthalocyanines (MPcs) is related to the chemical properties of conjugate structures and the central metal ions. Herein, a biomimetic catalytic system composed of metallophthalocyanines (MPcR₄, M = Mn(II), Fe(II), Co(II), Ni(II), Cu(II), Zn(II); R = -H, -COOH, -NO₂, -NH₂) and molecular O₂ was performed to study the influence of MN₄-type coordination structure in metallophthalocyanines for the degradation of dibenzothiophene (DBT) in model oil containing n-octane. The results reveal that the conjugate structures and the center metal ions of metallophthalocyanines played key roles in oxidative desulfurization performance. The inductive effect of different R substituents strongly affected the electron cloud distribution of the conjugate structures and the catalytic performance. Moreover, the catalytic activity of MPcs, which is related to the d electronic configuration and ligand-field effects, does not sequentially increase with the increase in the d electron number of central metal ions.     

Unravelling the Helianthus tuberosus L. (Jerusalem Artichoke,Kiku-Imo) Tuber Proteome by Label-Free Quantitative Proteomics

The present research investigates the tuber proteome of the ‘medicinal’ plant Jerusalem artichoke (abbreviated as JA) (Helianthus tuberosus L.) using a high-throughput proteomics technique. Although JA has been historically known to the Native Americans, it was introduced to Europe in the late 19th century and later spread to Japan (referred to as ‘kiku-imo’) as a folk remedy for diabetes. Genboku Takahashi research group has been working on the cultivation and utilization of kiku-imo tuber as a traditional/alternative medicine in daily life and researched on the lowering of blood sugar level, HbA1c, etc., in human subjects (unpublished data). Understanding the protein components of the tuber may shed light on its healing properties, especially related to diabetes. Using three commercially processed JA tuber products (dried powder and dried chips) we performed total protein extraction on the powdered samples using a label-free quantitate proteomic approach (mass spectrometry) and catalogued for the first time a comprehensive protein list for the JA tuber. A total of 2967 protein groups were identified, statistically analyzed, and further categorized into different protein classes using bioinformatics techniques. We discussed the association of these proteins to health and disease regulatory metabolism. Data are available via ProteomeXchange with identifier PXD030744.     

高活性固载化三氯化铝催化合成金刚烷

首次用固载化AlCl3催化剂催化桥式四氢双环戊二烯异构化反应合成金刚烷.结果表明,以γ-Al2O3为载体的固载化AlCl3催化剂在较低的反应温度(140℃)下具有较高的催化活性和生成金刚烷的选择性,桥式四氢双环戊二烯的转化率达到100%,金刚烷的选择性为17.7%;而以Si O2作为载体制备的催化剂,几乎没有金刚烷生成.