The interfacial dilational properties of hydrophobically modified associating polyacrylamide studied by the interfacial tension relaxation method at an oil-water interface

The interfacial dilational viscoelastic properties of hydrophobically associating block copolymer composed of acrylamide (AM) and a low amount of 2-phenoxylethyl acrylate (POEA) (<1.0 mol%) at the octane-water interfaces were studied by means of the interfacial tension relaxation method. The dependencies of interfacial dilational elasticity and viscous component on the dilational frequency were investigated. The interaction of hydrophobically associating block copolymer [P(AM/POEA)] with sodium dodecyl sulfate (SDS) has been explored. The results show that at lower frequency, the dilational elasticity for different concentration copolymer is close to zero; at higher frequency, the dilational elasticity shows no change with increased frequency; At moderate frequency (10(-3)-1 Hz), the dilational elasticity decreased with a decrease in the dilational frequency. The results show that the hydrophobic groups of [P(AM/POEA)] chains can be associated by inter- or intrachain liaisons in water solution. The dilational viscous component for P(AM/POEA) comes forth a different maximum value at different frequencies when the polymer concentration is different. It is generally believed that the dilational viscous component reflects the summation of the various microscopic relaxation processes at and near the interface and different relaxation processes have different characteristic frequencies. The spectrum of dilational viscous component may appear more than once maximum values at different frequencies. The influence of SDS on the limiting dilational elasticity and viscous component for polymer solution was elucidated. For 5000 ppm polymer solution, the limiting dilational elasticity decreased with an increase in SDS concentration. The dilational viscous component passed through a maximum value with a rise in the dilational frequency, which appeared at different frequency when SDS concentration is different; and the higher is the concentration, the lower is the dilational frequency. It can be explained that macromolecules may be substituted by SDS molecules in the interface and the interaction of molecules decrease, which makes the limiting dilational elasticity decrease. For 200 ppm polymer solution, the limiting dilational elasticity increased firstly and then decreased with SDS concentration increasing. This may be explained that the interfacial polymer concentration is so low that SDS molecules absorbed in the interface dominate dilational properties of the interfacial film even at very low SDS concentration. However, SDS molecules can gradually substitute the polymer molecules in the interface with a rise in SDS concentration, which results in the decrease in the limiting dilational elasticity.     

DNA-mediated coordinative assembly of upconversion hetero-nanostructures for targeted dual-modality imaging of cancer cells

We reported a simple and universal strategy for DNA-mediated assembly of CdTe quantum dots (QDs) and lanthanide-doped upconversion nanoparticles (UCNPs). Such DNA-QD/UCNPs heterostructures not only maintains both fluorescent properties of QDs and upconversion luminescence behaviors of UCNPs, but also offers a polyvalent DNA surface, allowing for targeted dual-modality imaging of cancer cells using an aptamer     

Synthesis and Kinetic Study on the Chromium(III) Complex [Cr(ASA)(en)2]Cl·2H2O

In order to explore the transfer mechanism of chromium(III) in mammals, a novel complex [Cr(ASA)(en)₂]Cl· 2H₂O, bis(ethylenediamine‐ κ ² N,N′)(4‐aminosalicylic acid‐ κ ² O,O′) chromium(III) monochloride dihydrate was synthesized (4‐aminosalicylic acid=H₂ASA, ethylenediamine=en). The crystal structure belongs to orthorhombic system with the space group P2₁2₁2₁ by means of X‐ray diffraction. The characteristic for transfer of Cr³⁺ from the compound to the low‐molecular‐mass chelator EDTA and the iron‐binding protein apoovotransferrin (apoOTf) was followed by UV‐visible (UV‐Vis) and fluorescence spectra in 0.01 mol·L^?1 Hepes at pH 7.4. The second order rate constants were calculated. Those spectra in conjunction were used to obtain more accurate information about the interaction of chromium complex with apoOTf. The experimental results indicate that Cr³⁺ can be transferred from the complex to apoOTf with the retention of the 4‐aminosalicylic acid acting as a synergistic anion.     

Liquid Chromatographic Analysis of Arabinosylcytosin and 1-β-D-Arabinofuranosyluracil in Treatment with Cyclophosphamide and Pirarubicin

A reversed-phase liquid chromatographic (RPLC) method has been developed for determination of arabinosylcytosin (Ara-C) and its metabolite 1-β-D-arabinofuranosyluracil (Ara-U) on a 250 mm × 4.6 mm i.d., 5 μm particle, Diamonsil C₁₈ column. The mobile phase was a mixture of 5% methanol and 95% 10 mmol L⁻¹ phosphate buffer adjusted to pH 5.5. The flow-rate was 1.0 mL min⁻¹ and the injection volume 20 μL. Eluting compounds were detected at 270 nm by use of an ultraviolet detector. Under these LC conditions cyclophosphamide (CTX) and pirarubicin (THP), two other medicines given with Ara-C in clinical treatment, do not interfere with measurement of Ara-C and Ara-U. Individual calibration plots of peak area against concentration generated from analysis of standard solutions were used to calculate the concentrations of Ara-C and Ara-U in sample solutions. The calibration plot was linear in the range 2.5–100 μg mL⁻¹, the average recovery of Ara-C and Ara-U was more than 98% (RSD < 2.5%), and between-day and within-day precision, expressed as relative standard deviation (RSD), were below 4.0%. LOQ for both Ara-C and Ara-U was 2 μg mL⁻¹. The method is rapid, simple, accurate and reproducible, and especially useful for application to patient samples.     

Effect of the Secondary Reduction on the Enantioselectivity and Function of Additives in the Chiral Oxazaborolidine‐Catalyzed Asymmetric Borane Reduction of Ketones

The secondary reduction in the direct and oxazaborolidine‐catalyzed asymmetric borane reduction of ketones was investigated by the use of GC/MS tracing titration and control experiments. The results indicate that the secondary reduction affects the enantioselectivity only in noncoordinated solvents at low temperature and not under the usual catalytic reduction conditions because the intermediate alkoxyborane is unstable and quickly converts to borane and dialkoxyborane. The function of an alcohol additive in the asymmetric borane reduction of ketones is to consume excess borane in the reduction system thus inhibiting noncatalytic reduction, which leads to increased enantioselectivity in the catalytic reduction.     

Synthesis and Preliminary Anti‐bacterial Activity of Some 4‐Substituted‐N1‐2‐pyridylsulfanilamide Derivatives

2‐Amino‐4‐ethoxycarbonylpyridine 1 was used as a starting material in the synthesis of some 4‐substituted‐N¹‐2‐pyridylsulfanilamide derivatives to evaluate their antimicrobial activity. The obtained compounds were of no particular effect against the tested organisms except for a noticeable inhibition of B. subtilis, which was of varying extents but remained clearly significant.     

A new strategy for the synthesis of α,β-diaroylpropionates promoted by samarium metal in DMF

When promoted by samarium in DMF, aroyl chlorides react readily with acrylates to afford α,β-diaroylpropionates in good to excellent yields without pretreating or activating the metallic samarium.     

羟基铝溶液及铝交联蒙脱土的研究

本文用(27)~Al NMR法和8-羟基喹啉萃取法分别研究了羟基铝溶液中十三聚铝含量的变化规律,还用X-射线衍射法研究了铝交联蒙脱土d_(001)的变化。研究结果表明,铝离子的聚合情况主要由羟铝比决定,而浓度影响不大。随着羟铝比的增加,溶液中单核铝离子含量减少,十三聚铝离子相对含量增加,所得铝交联蒙脱土的d_(001)也随之增大。参照这些变化规律、控制羟基铝溶液的组成,可以制备各种层柱状铝交联蒙脱土复合物。     

On-surface isostructural transformation from a hydrogen-bonded network to a coordination network for tuning the pore size and guest recognition

Rational manipulation of supramolecular structures on surfaces is of great importance and challenging. We show that imidazole-based hydrogen-bonded networks on a metal surface can transform into an isostructural coordination network for facile tuning of the pore size and guest recognition behaviours. Deposition of triangular-shaped benzotrisimidazole (H₃btim) molecules on Au(111)/Ag(111) surfaces gives honeycomb networks linked by double N–H⋯N hydrogen bonds. While the H₃btim hydrogen-bonded networks on Au(111) evaporate above 453 K, those on Ag(111) transform into isostructural [Ag₃(btim)] coordination networks based on double N–Ag–N bonds at 423 K, by virtue of the unconventional metal–acid replacement reaction (Ag reduces H⁺). The transformation expands the pore diameter of the honeycomb networks from 3.8 Å to 6.9 Å, giving remarkably different host–guest recognition behaviours for fullerene and ferrocene molecules based on the size compatibility mechanism.

A hydrogen-bonded network on a Ag(111) surface can transform into an isostructural Ag(i) coordination network, giving drastically different host–guest recognition behaviours.     

Zig‐Zag Diphosphene Oligomers Linked by Silver(I) Cation

The coordination of silver cation to diphosphene Mes*P=PMes* ( 1 , Mes* = ^tBu₃C₆H₂) was investigated in detail. The reaction of 1 with Ag[Al(OR_F)₄] (OR_F = OC(CF₃)₃) in the ratios of 2 : 1, 3 : 2 and 1 : 2 led to the formation of the first cationic silver linked diphosphene complexes 2 — 4 . Complexes 2 and 3 contain two and three diphosphene molecules linked by the linear Ag(I) cation, respectively, and they feature unusual zig‐zag topologies. Complex 4 is a dinuclear silver complex, and each Ag(I) center features a tetrahedral geometry, coordinated by one phosphorus atom of diphosphene 1 and three chloro atoms of two CH₂Cl₂ molecules.