High strength,acid-resistant composites from canola,sunflower, or linseed oils: Influence of triglyceride unsaturation on material properties

Here are reported composites made by crosslinking unsaturated units in canola, sunflower, or linseed oil with sulfur to yield CanS , SunS , and LinS , respectively. These plant oils were selected because the average number of crosslinkable unsaturated units per triglyceride vary from 1.3 for canola to 1.5 for sunflower and 1.8 for linseed oil. The remeltable composites show compressive strengths that increase with increasing unsaturation number from CanS (9.3 MPa) to SunS (17.9 MPa) to LinS (22.9 MPa). These values for SunS and LinS are competitive when compared with the value of 17 MPa required for residential building using traditional Portland cement. The plant oil composites are recyclable over many cycles and can retain up to 100% of strength after 24 hr in oxidizing acid under conditions where Portland cement is dissolved in under 30 min. Infusion of the composites into premade cement blocks affords them with significantly improved acid resistance as well. This work thus provides a simple, nearly 100% atom economical route to convert plant oils and waste sulfur to composites having enhanced performance over commercial structural materials.     

Characterization of optimized Na+ and Cl− liquid membranes for use with extracellular, self-referencing microelectrodes

Self-referencing with ion-selective microelectrodes (ISMs) is a useful approach for monitoring near-real-time ion flux near single cells and across epithelia. While ISMs for H⁺, Ca²⁺, and K⁺ have been optimized for use with self-referencing, ISMs for two other primary inorganic ions, Na⁺ and Cl⁻, have not. In this study, we have characterized ISMs based on three Na⁺ ionophores (I, VI, and X) and one Cl⁻ ionophore to assess their suitability for use with self-referencing. ISMs constructed with Na⁺ ionophore VI have short response times (≈100 ms) but possess nearly an order of magnitude less selectivity for Na⁺ over K⁺ than ISMs constructed with Na⁺ ionophore X. The Na⁺ ionophore X mixture was enhanced to give it a shorter response time while not compromising its selectivity. A Cl⁻-selective microelectrode was constructed and characterized with superior anionic selectivity compared with previously reported Cl⁻ ISMs used with self-referencing. This Cl⁻-selective microelectrode, however, has a relatively slow response time (≈3 s), thus requiring changes to the self-referencing protocol. Self-referencing with these ISMs will enable near-real-time ion flux measurements for Na⁺ and Cl⁻.     

Conformational landscape surfing induced by off-on pi-pi stacking in a porphyrin-quinone dyad

A covalently linked porphyrin-quinone dyad crystallizes with two orientations of the quinone, extended away from (off) and cofacial with the porphyrin macrocycle (on), which induce different conformations of the macrocycle and model the recently proposed structural effect of a nearby residue on the heme prosthetic group of a nitric oxide synthase.     

Asymmetric synthesis of (1R,2S,3R)-gamma-methyl-cis-pentacin by a kinetic resolution protocol

The asymmetric synthesis of (1R,2S,3R)-3-methyl-2-amino-cyclopentane carboxylic acid has been achieved via kinetic resolution of racemic tert-butyl 3-methyl-cyclopentene-1-carboxylate with homochiral lithium (S)-N-benzyl-N-alpha-methylbenzylamide.     

Disulfides of manganese carbonyl. Synthesis of Mn(2)(CO)(7)(mu-S2) and its reactions with tertiary phosphines and arsines

The reaction of Mn(2)(CO)(9)(NCMe) with thiirane yielded the sulfidomanganese carbonyl compounds Mn(2)(CO)(7)(mu-S(2)), 2, Mn(4)(CO)(15)(mu(3)-S(2))(mu(4)-S(2)), 3, and Mn(4)(CO)(14)(NCMe)(mu(3)-S(2))(mu(4)-S(2)), 4, by transfer of sulfur from the thiirane to the manganese complex. Compound 3 was obtained in better yield from the reaction of 2 with CO, and compound 4 is obtained from the reaction of 2 with NCMe. The reaction of 2 with PMe(2)Ph yielded the tetramanganese disulfide Mn(4)(CO)(15)(PMe(2)Ph)(2)(mu(3)-S)(2), 5, and S=PMe(2)Ph. The reaction of 5 with PMe(2)Ph yielded Mn(4)(CO)(14)(PMe(2)Ph)(3)(mu(3)-S)(2), 6, by ligand substitution. The reaction of 2 with AsMe(2)Ph yielded the new complexes Mn(4)(CO)(14)(AsMe(2)Ph)(2)(mu(3)-S(2))(2), 7, Mn(4)(CO)(14)(AsMe(2)Ph)(mu(3)-S(2))(mu(4)-S(2)), 8, Mn(6)(CO)(20)(AsMe(2)Ph)(2)(mu(4)-S(2))(3), 9, and Mn(2)(CO)(6)(AsMe(2)Ph)(mu-S(2)), 10. Reaction of 2 with AsPh(3) yielded the monosubstitution derivative Mn(2)(CO)(6)(AsPh(3))(mu-S(2)), 11. Reaction of 7 with PMe(2)Ph yielded Mn(4)(CO)(15)(AsMe(2)Ph)(2)(mu(3)-S)(2), 12. The phosphine analogue of 7, Mn(4)(CO)(14)(PMe(2)Ph)(2)(mu(3)-S(2))(2), 13, was prepared from the reaction of Mn(2)(CO)(9)(PMe(2)Ph) with Me(3)NO and thiirane. Compounds 2-9 and 11-13 were characterized by single-crystal X-ray diffraction. Compound 2 contains a disulfido ligand that bridges two Mn(CO)(3) groups that are joined by a Mn-Mn single bond, 2.6745(5) A in length. A carbonyl ligand bridges the Mn-Mn bond. Compounds 3 and 4 contain four manganese atoms with one triply bridging and one quadruply bridging disulfido ligand. Compounds 5 and 6 contain four manganese atoms with two triply bridging sulfido ligands. Compound 9 contains three quadruply bridging disulfido ligands imbedded in a cluster of six manganese atoms.     

Peptide-small molecule hybrids via orthogonal deprotection-chemoselective conjugation to cysteine-anchored scaffolds. A model study

The feasibility of an orthogonal deprotection-conjugation protocol, holding the promise of libraries of functionally diverse chemical probes attached to cysteine-anchored peptide scaffolds, has been explored with a model system. The necessary tools for assembly of the hybrid libraries have been prepared and the tandem procedure optimized. S-alkylation and S-sulfenylation are featured as the chemoselective ligation reactions. [reaction: see text]     

Structure,biosynthetic origin,and engineered biosynthesis of calcium-dependent antibiotics from Streptomyces coelicolor

The calcium-dependent antibiotic (CDA), from Streptomyces coelicolor, is an acidic lipopeptide comprising an N-terminal 2,3-epoxyhexanoyl fatty acid side chain and several nonproteinogenic amino acid residues. S. coelicolor grown on solid media was shown to produce several previously uncharacterized peptides with C-terminal Z-dehydrotryptophan residues. The CDA biosynthetic gene cluster contains open reading frames encoding nonribosomal peptide synthetases, fatty acid synthases, and enzymes involved in precursor supply and tailoring of the nascent peptide. On the basis of protein sequence similarity and chemical reasoning, the biosynthesis of CDA is rationalized. Deletion of SCO3229 (hmaS), a putative 4-hydroxymandelic acid synthase-encoding gene, abolishes CDA production. The exogenous supply of 4-hydroxymandelate, 4-hydroxyphenylglyoxylate, or 4-hydroxyphenylglycine re-establishes CDA production by the DeltahmaS mutant. Feeding analogs of these precursors to the mutant resulted in the directed biosynthesis of novel lipopeptides with modified arylglycine residues.     

Potential of electrophilic epoxide reactions for the monitoring of acid gases in the environment

Mineral and short-chain carboxylic acid vapours and NO(x) gases were reacted with cyclohexene oxide (1,2-epoxycyclohexane) to quantitatively produce specific, thermally stable cyclohexyl derivatives. Subsequent analysis of these derivatives by gas chromatography with mass spectroscopy and flame ionisation detection afforded a multi analyte method for the assay of these gaseous acidic atmospheric species. Derivatisation was found to be quantitative for the derivatives tested and the method highly sensitive (to 0.3 mg/m3 for a 30 l sample), accurate, precise and free from apparent interferences. The technique has been applied to "acid stack gases" and a number of other acid rich atmospheres and the results obtained show good agreement with the single analyte wet chemical determinations indicating that the approach has considerable potential as a routine analytical method for measuring such atmospheric pollutants. The high specificity of the reaction mechanism and its potential for the analysis of analyte mixtures is illustrated in the assay of nitric acid and its acid anhydride, dinitrogen pentoxide.     

Dithiane additions to vinyl epoxides: steric control over the SN2 and SN2' manifolds

High chemoselectivity can be achieved in the addition of lithium dithiane anions to vinyl epoxides exploiting the steric nature of the dithiane substituent. Unencumbered dithiane anions afford SN2 adducts, whereas sterically encumbered anions lead primarily to SN2' adducts. Furthermore, the SN2' addition occurs syn to the vinyl epoxide.     

Adsorption of a polymeric siloxane surfactant on carbon black particles dispersed in mixtures of water with polar organic solvents

The adsorption of a rake-type polymeric siloxane surfactant (polydimethylsiloxane-graft-polyether copolymer) on carbon black (CB) particles dispersed in mixtures of water with polar organic solvents (ethanol, formamide, or glycerol) has been investigated. The adsorption obeys the Langmuir isotherm at low surfactant concentrations (below the critical micelle concentration, CMC). At these conditions, the average surface area occupied by one siloxane surfactant follows the sequence water+glycerol mixture >plain water >water+ethanol mixture. At higher surfactant concentrations in the solution in contact with the particles, a sharp increase in the adsorbed amount is observed. The adsorbed layer thickness has been determined by dynamic light scattering. Below the CMC the adsorbed layer thickness is less than 10 nm. Above the CMC, the adsorbed layer thickness increases to 20-30 nm, a length scale comparable to the diameter of the siloxane surfactant micelles in aqueous solution. This fact, together with SANS data that we have obtained in the absence of added polar organic solvent, indicates that the structure of the adsorbed layer is similar to that of micelles. The findings presented here are relevant to waterborne coatings and ink formulations, where polymeric surfactants are used in conjunction with polar organic solvents.