Triangular pattern formation on silicon through self-organization of GaN nanoparticles

Nanoparticles of gallium nitride, synthesized by a low-temperature reaction between triethyl gallium and ammonia, were introduced onto silicon wafers containing a thin layer of chemically prepared silicon dioxide. At room temperature, the nanoparticles form unstructured agglomerates on the surface. However, upon annealing the samples beyond the decomposition temperature of the silicon dioxide layer, the gallium nitride particles self-organize to form triangular structures. The pattern formation is attributed to the domain separation associated with the (1 × 1)-(7 × 7) surface phase transformation followed by selective incorporation of the nanoparticles.     

Free radical-mediated aryl amination and its use in a convergent [3 + 2] strategy for enantioselective indoline alpha-amino acid synthesis

The scope of aryl radical additions to the nitrogen of azomethines is described. Aryl, trifluoromethyl alkyl, and alpha,beta-unsaturated ketimines engage in regioselective aryl-nitrogen bond formation via 5-exo cyclizations of an aryl radical to azomethine nitrogen. Selectivity for carbon-nitrogen over carbon-carbon bond formation is generally high (>95:5) and competes only with direct aryl radical reduction by stannane (0-10%). Alpha-ketoimines are a promising new class of carbon radical acceptors for which no competitive aryl radical reduction is observed. The reaction conditions are pH-neutral and are therefore among the mildest methods available for amination of an aromatic ring. The ketimines examined did not suffer from competitive reduction by stannane, offering an advantage over the use of diazo and azide functional groups as nitrogen sources for carbon radicals. The free radical-mediated aryl amination was sequenced with the O'Donnell phase transfer-catalyzed enantioselective alkylation strategy of glycinyl imine to provide either enantiomer of indoline alpha-amino acids with high ee. These new constrained phenyl alanine derivatives are now readily available for evaluation across a variety of applications.     

Thermal,spectroscopic and XRD studies on nitroaminoguanidine (NAG)

Nitroaminoguanidine (NAG) has been investigated as regards its thermal decomposition characteristics using simultaneous thermal analysis, infrared spectroscopy, X-ray diffraction and polarising microscopy. XRD studies show thatNAG crystal belongs to the tetragonal system. The crystal structure parameters are found to be:a=17.063±0.005Å,b=17.063±0.005Å,c=5.155±0.005Å andc/a axial ratio=0.302. Under non-isothermal conditions,NAG decomposed apparently in one stage with a loss in weight of 80%. But the thermal decomposition ofNAG in the solid phase under isothermal conditions proceeded through three stages. Both the first and the second stages obeyed theA-E (Avrami Erofee'v) equation forn=1. The 3rd stage is too slow and kinetics has not been attempted. The rate parameters for the first and second stages have been evaluated. Gaseous decomposition products detected using the IR gas cell are NH₃, NO₂, HCN, N₂O, CO and CO₂. High temperature IR studies indicate preferential deamination reaction initially indicating breaking of N?NH₂ and C?NH₂ bonds leading to NH₂ radical formation. Addition of diphenylamine, a known chain inhibitor, decelerated the thermal decomposition, supporting a radical chain reaction.     

Selective extraction of U(VI), Th(IV), and La(III) from acidic matrix solutions and environmental samples using chemically modified Amberlite XAD-16 resin

A new grafted polymer has been developed by the chemical modification of Amberlite XAD-16 (AXAD-16) polymeric matrix with [(2-dihydroxyarsinoylphenylamino)methyl]phosphonic acid (AXAD-16-AsP). The modified polymer was characterized by a combination of ¹³C CPMAS and ³¹P solid-state NMR, Fourier transform-NIR-FIR-Raman spectroscopy, CHNPS elemental analysis, and thermogravimetric analysis (TGA). The distribution studies for the extraction of U(VI), Th(IV), and La(III) from acidic solutions were performed using an AXAD-16-AsP-packed chromatographic column. The influences of various physiochemical parameters on analyte recovery were optimized by both static and dynamic methods. Accordingly, even under high acidities (>4 M), good distribution ratio (D) values (10²–10⁴) were achieved for all the analytes. Metal ion desorption was effective using 1 mol L^–1 (NH₄)₂CO₃. From kinetic studies, a time duration of <15 min was sufficient for complete metal ion saturation of the resin phase. The maximum metal sorption capacities were found to be 0.25, 0.13, and 1.49 mmol g^–1 for U(VI); 0.47, 0.39, and 1.40 mmol g^–1 for Th(IV); and 1.44, 1.48, and 1.12 mmol g^–1 for La(III), in the presence of 2 mol L^–1 HNO₃, 2 mol L^–1 HCl, and under pH conditions, respectively. The analyte selectivity of the grafted polymer was tested in terms of interfering species tolerance studies. The system showed an enrichment factor of 365, 300, and 270 for U(VI), Th(IV), and La(III), and the limit of analyte detection was in the range of 18–23 ng mL^–1. The practical applicability of the polymer was tested with synthetic nuclear spent fuel and seawater mixtures, natural water, and geological samples. The RSD of the total analytical procedure was within 4.9%, thus confirming the reliability of the developed method.     

A new chelating sorbent for metal ion extraction under high saline conditions

A new chelating polymeric sorbent was developed by functionalizing Amberlite XAD-16 with 1,3-dimethyl-3-aminopropan-1-ol via a simple condensation mechanism. The newly developed chelating matrix offered a high resin capacity and faster sorption kinetics for the metal ions such as Mn(II), Pb(II), Ni(II), Co(II), Cu(II), Cd(II) and Zn(II). Various physio-chemical parameters like pH-effect, kinetics, eluant volume and flow rate, sample breakthrough volume, matrix interference effect on the metal ion sorption have been studied. The optimum pH range for the sorption of the above mentioned metal ions were 6.0–7.5, 6.0–7.0, 8.0–8.5, 7.0–7.5, 6.5–7.5, 7.5–8.5 and 6.5–7.0, respectively. The resin capacities for Mn(II), Pb(II), Ni(II), Co(II), Cu(II), Cd(II) and Zn(II) were found to be 0.62, 0.23, 0.55, 0.27, 0.46, 0.21 and 0.25 mmol g⁻¹ of the resin, respectively. The lower limit of detection was 10 ng ml⁻¹ for Cd(II), 40 ng ml⁻¹ for Mn(II) and Zn(II), 32 ng ml⁻¹ for Ni(II), 25 ng ml⁻¹ for Cu(II) and Co(II) and 20 ng ml⁻¹ for Pb(II). A high preconcentration value of 300 in the case of Mn(II), Co(II), Ni(II), Cu(II),Cd(II) and a value of 500 and 250 for Pb(II) and Zn(II), respectively, were achieved. A recovery of >98% was obtained for all the metal ions with 4 M HCl as eluting agent except in the case of Cu(II) where in 6 M HCl was necessary. The chelating polymer showed low sorption behavior to alkali and alkaline earth metals and also to various inorganic anionic species present in saline matrix. The method was applied for metal ion determination from water samples like seawater, well water and tap water and also from green leafy vegetable, from certified multivitamin tablets and steel samples.     

Synthesis,spectral, structural characterization and biological activity of new palladium(II) complexes containing 3‐acetyl‐8‐methoxy‐2H‐chromen‐2‐one derived Schiff bases

Four different mononuclear palladium(II) complexes of 3‐acetyl‐8‐methoxycoumarin Schiff bases were synthesized and characterized by spectrochemical techniques. Further analysis through X‐ray crystallography confirmed the structures of the complexes. Their interactive ability with Calf Thymus DNA and protein (Bovine Serum Albumin and Human Serum Albumin) were investigated by means of absorption and emission methods. The intercalative mode of binding with DNA was supported by EB displacement studies and viscosity measurements. Configurational changes that occurred in the proteins have been analysed with the help of 3D fluorescence studies. The complexes were shown to have good antimicrobial activity against the tested bacterial and fungal pathogens. In addition, antiproliferative activity of the complexes was evaluated on A549 and MCF‐7 cell lines and the complexes were comparatively more active than the standard drug cisplatin. Among the compounds, complex 3 was the most effective against MCF‐7 (IC₅₀ value of 5.20 ± 0.15 μM) and A549 (5.09 ± 0.13 μM) compared with the other complexes 1 (6.48 ± 0.17 μM; 5.98 ± 0.09 μM), 2 (5.53 ± 0.12 μM; 5.85 ± 0.11 μM), 4 (6.73 ± 0.19 μM; 6.63 ± 0.16 μM) and cisplatin (16.79 ± 0.08 μM; 15.10 ± 0.05 μM) respectively. LDH and NO release assays confirmed the cytotoxic potential of the synthesized complexes.     

Synthesis,spectral, electrochemical and catalytic studies of new Ru(III) tetradentate Schiff base complexes

The synthesis and characterization of several hexa‐coordinated ruthenium(III) Schiff base complexes of the type [RuX(EPh₃)(L)] (X = Cl or Br; E = P or As; L = dianion of the tetradentate Schiff base) are reported. IR, EPR, electronic spectra and cyclic voltammetric data of the complexes are discussed. An octahedral geometry has been tentatively proposed for all of these complexes. The new complexes have been subjected to catalytic activity in the reaction of oxidation of alcohols in the presence of N‐methylmorpholine‐N‐oxide. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis of Novel Receptors From 7-Deoxycholic Acid and Studies on Their Cation Binding Properties

The synthesis and cation binding properties of chiral crown ethers derived from 7-deoxycholic acid along with their application in asymmetric Michael reaction are described.     

Control of pi-stacking for highly emissive poly(p-phenylenevinylene)s: synthesis and photoluminescence of new tricyclodecane substituted bulky poly(p-phenylenevinylene)s and its copolymers

In the present work, we have demonstrated a facile approach to increase the luminescence of the poly (p-phenylenevinylene)s via controlling the molecular aggregates induced by pi-stacking. We have synthesized new bulky tricyclodecane (TCD) substituted PPVs: poly(2-methoxy-5-tricyclodecanemethyleneoxy-1,4-phenylenevinylene) (MTCD-PPV), poly(bis-2,5-tricyclodecanemethyleneoxy-1,4-phenylenevinylene) (BTCD-PPV), and a series of symmetrically substituted bulky PPV copolymers (P-1-P-7) covering the entire composition range from 0 to 100 mol %. The structures of the monomers and polymers were confirmed by 1H NMR and FTIR, and the molecular weights were determined by gel permeation chromatography. The composition analysis by NMR revealed that the bulky monomer was highly reactive and the incorporation of bulky units in MEH-PPV increased irrespective of the feed ratio. The polymers possess good solubility, high molecular weights, good thermal stability, and so forth. The molecular weights of the PPV copolymers were also significantly affected by the bulky substitution: the higher the incorporation of bulky units, the lower the molecular weight. The absorption and emission studies revealed that there was no influence on the MEH-PPV by TCD substitution in solution whereas in the solid state the photoluminescence intensity of PPV increased more than 10 times. The luminescence increase in PPV was observed throughout the entire bulk and was not confined to any particular domain in the polymer. The bulky PPV copolymers showed that both the luminescence intensity (in film) and quantum yields (in solution) increased with an increase in the extent of BTCD incorporation in the MEH-PPV and attained a maximum for 50% BTCD. The TCD unit has thus proved to be an efficient bulky susbstituent for PPV as it controls the pi-stack-induced molecular aggregates in the polymer chains by increasing the interchain distances. The new bulky PPV copolymers are highly soluble, thermally stable, and highly luminescent besides being economically cheap compared to the other materials reported so far for the bulkier approach in pi-conjugated materials.