Comparative Study of Catalytic Potential of TBAB,BTEAC, and CTAB in One-Pot Synthesis of 1,4-Dihydropyridines Under Aqueous Medium

Convenient and straightforward tetrabutylammonium bromide (TBAB), benzyltrienthylammonium chloride (BTEAC), and cetyltrimethylammonium bromide (CTAB) catalyzed synthesis of 1,4-dihydropyridines (1,4-DHPs) in water was established for the first time. The catalytic potential of phase-transfer catalysts (PTCs) in three different concentrations was envisioned. Aryl aldehydes and hetero aryl aldehydes afforded good yields of 1,4-DHPs in TBAB and BTEAC reactions. In particular, furfuraldehyde and thienyl-2-carbaldehyde produced excellent yields. Isolation of the products through nonchromatographic methods, good to excellent yields, and benign reaction conditions are the major advantages of this protocol.     

In Vivo Endoscopic Tissue Identification by Rapid Evaporative Ionization Mass Spectrometry (REIMS)

Gastrointestinal cancers are a leading cause of mortality, accounting for 23 % of cancer‐related deaths worldwide. In order to improve outcomes from these cancers, novel tissue characterization methods are needed to facilitate accurate diagnosis. Rapid evaporative ionization mass spectrometry (REIMS) is a technique developed for the in vivo classification of human tissue through mass spectrometric analysis of aerosols released during electrosurgical dissection. This ionization technique was further developed by utilizing surface induced dissociation and was integrated with an endoscopic polypectomy snare to allow in vivo analysis of the gastrointestinal tract. We tested the classification performance of this novel endoscopic REIMS method in vivo. It was shown to be capable of differentiating between healthy layers of the intestinal wall, cancer, and adenomatous polyps based on the REIMS fingerprint of each tissue type in vivo.     

Self‐Pillared,Single‐Unit‐Cell Sn‐MFI Zeolite Nanosheets and Their Use for Glucose and Lactose Isomerization

Single‐unit‐cell Sn‐MFI, with the detectable Sn uniformly distributed and exclusively located at framework sites, is reported for the first time. The direct, single‐step, synthesis is based on repetitive branching caused by rotational intergrowths of single‐unit‐cell lamellae. The self‐pillared, meso‐ and microporous zeolite is an active and selective catalyst for sugar isomerization. High yields for the conversion of glucose into fructose and lactose to lactulose are demonstrated.     

Simultaneous quantitation of rosuvastatin and gemfibrozil in human plasma by high-performance liquid chromatography and its application to a pharmacokinetic study

A simple, sensitive and specific high-performance liquid chromatography method is described for simultaneous determination of rosuvastatin (RST) and gemfibrozil (GFZ) in human plasma using celecoxib as an internal standard (IS). The assay procedure involved extraction of RST, GFZ and IS from plasma into acetonitrile. Following separation and evaporation of the organic layer the residue was reconstituted in the mobile phase and injected onto an X-Terra C(18) column (4.6 x 150 mm, 5.0 microm). The chromatographic run time was less than 20 min using flow gradient (0.0-1.60 mL/min) with a mobile phase consisting of 0.01 M ammonium acetate:acetonitrile:methanol (50:40:10, v/v/v) and UV detection at 275 nm. Nominal retention times of RST, GFZ and IS were 6.7, 13.9 and 16.4 min, respectively. Absolute recovery of both analytes and IS was greater than 90%. The lower limit of quantification (LLOQ) of RST and GFZ was 0.03 and 0.30 microg/mL, respectively. Linearity was excellent (r(2) = 0.999) in the 0.03-10 microg/mL and 0.3-100 microg/mL ranges for RST and GFZ, respectively. The inter- and intra-day precisions in the measurement of RST quality control (QC) samples 0.03, 0.09, 2.50 and 8.00 microg/mL were in the range 2.37-9.78% relative standard deviation (RSD) and 0.92-10.08% RSD, respectively. Similarly, the inter- and intra-day precisions in the measurement of GFZ quality control (QC) samples 0.30, 0.90, 25.0 and 80.0 microg/mL were in the ranges 2.79-6.27 and 0.96-9.69% RSD, respectively. Accuracies in the measurement of QC samples for RST and GFZ were in the range 85.43-107.23 and 84.98-102.35% respectively, of the nominal values. RST and GFZ were stable in the array of stability studies viz., bench-top, auto-sampler and freeze-thaw cycles. Stability of RST and GFZ was established for 1 month at -80C. The application of the assay in an oral pharmacokinetic study in rats co-administered with RST and GFZ is described.     

Para Substituted Benzaldehydes as Expedient Reagents for the Oxidative Aromatization of Hydroquinoline

A Cannizzaro‐type reaction of tetrahydro‐5(1H)‐quinolinones with para substituted benzaldehydes in the presence of a base formed the corresponding quinoline and aryl methanol rather than arylidene derivatives because of the oxidation of tetrahydroquinoline and reduction of benzaldehydes as a result of unprecedented hydride transfer from tetrahydroquinoline to arylaldehydes. The reaction proceeds best with the participation of substituents with +M effect in substrate molecule.     

Synthesis of novel isoxazole-benzoquinone hybrids via 1,3-dipolar cycloaddition reaction as key step

An efficient method for the preparation of novel 2-(5-arylisoxazol-3-yl)cyclohexa-2,5-diene-1,4-dione hybrids via 1,3-dipolar cycloaddition followed by an oxidation reaction using ceric ammonium nitrate (CAN) has been described. Using this method, various aryl as well as alkyl substituted isoxazole-benzoquinone hybrids were synthesized in high yields.     

Copper(I) complexes of N-(aryl)pyridine-2-aldimines: Spectral, electrochemical and catalytic properties

The reactions of N-(aryl)pyridine-2-aldimines (L-R; R = OCH₃, CH₃, H, Cl and NO₂), derived from pyridine-2-aldehyde and para-substituted anilines, with CuI in methanol under ambient conditions afford a series of brown complexes of the type [{Cu(L-R)I}₂]. The structure of the [{Cu(L-OCH₃)I}₂] complex has been determined by X-ray crystallography. In these dimeric complexes the two copper centers are linked through an iodo-bridge, and the L-R ligands are coordinated to the metal center through the pyridine-nitrogen and imine-nitrogen. All the complexes show characteristic ¹H NMR signals and intense MLCT transitions in the visible region. These complexes also show an emission near 465 nm, whilst they are excited at 340 nm, with relatively poor quantum yields (φ ∼0.002 at 298 K). Cyclic voltammetry on all the complexes shows two successive Cu(I)-Cu(II) oxidations on the positive side of SCE, and a reduction of the coordinated imine ligand on the negative side. These copper(I) complexes are found to efficiently catalyze Suzuki type C-C coupling reactions.     

Biosorption of Cr(VI) ions from aqueous solutions: kinetics, equilibrium, thermodynamics and desorption studies

Cr(VI) is a major water pollutant from industrial effluent whose concentration is to be reduced within the permissible limit. Present study reports a systematic evaluation of six different natural adsorbents for the removal of Cr(VI) from aqueous solutions in batch process. The adsorption kinetic data were best described by pseudo-second order model. The values of mass transfer coefficient for Cr(VI) adsorption indicated that the velocity of the adsorbate transport from the bulk to the solid phase was quite fast. The effective diffusivity of Cr(VI) removal for all the adsorbents were of the order of 10(-10) m(2)/s which suggested chemisorption of the process. The adsorption process was jointly controlled by film diffusion and intraparticle diffusion. Maximum monolayer adsorption capacities onto the natural adsorbents used were comparable to the other natural adsorbents used by other researchers. The thermodynamic studies and sorption energy calculation using Dubinin-Radushkevich isotherm model indicated that the adsorption processes were endothermic and chemical in nature. FT-IR studies were carried out to understand the type of functional groups responsible for Cr(VI) binding process. Desorption study was carried out with different concentration of NaOH solutions. Application study was carried out using electroplating industrial wastewater.     

Effect of annealing on hydrophobic stability of plasma deposited fluoropolymer coatings

Fluorinated amorphous carbon (a-C:F) films e.g. plasma polymerised perfluorocyclobutane have long attracted much consideration due to their low surface energy, hydrophobicity, low refractive index, good electrical and thermal insulation and good thermal stability. Although a-C:F films have many advantages, hydrophobic stability over time in air and water remains a major concern. In this study, the effects of weathering conditions on the hydrophobicity of fluorocarbon films prepared from perfluorocyclobutane precursors were examined using water contact angle measurements. It was found that the high initial hydrophobicity of as-deposited films degrades rapidly in humid conditions. The stability of hydrophobicity can be significantly improved when a suitable treatment such as annealing is employed. The mechanism of weathering was explained with the help of a number of morphological and chemical characterisation techniques such as Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), Fourier Transform Infrared Spectroscopy (FTIR) and X-ray Photoelectron Spectroscopy (XPS). In particular, XPS results demonstrated that a reduction in the overall amount of -CF₃ radical, oxygenation of surface fluorides and the formation of an overlayer all influence the degradation of fluorocarbon in aquatic environment.