Two-dimensional magneto-thermoelastic interactions in a micropolar functionally graded solid

Abstract

The present work is concerned with the 2D deformation in a nonhomogeneous, isotropic, micropolar, magneto-thermoelastic medium in the context of Lord-Shulman theory as a result of an inclined load. The inclined load is supposed to be a linear combination of normal load and tangential load. Material properties are assumed to be graded in x-direction. Normal mode technique is proposed to obtain the analytical expressions for the temperature field, displacement components, and stresses. These are also calculated numerically and depicted graphically to observe the variations of the considered physical variables.

Communicated by Seonho Cho.     

HILITE—A tool to investigate interactions of matter and light

Detailed investigations of laser–ion interactions require well-defined ion targets and detection techniques for high-sensitivity measurements of reaction educts and products. To this end, we have designed and built the High-Intensity Laser-Ion Trap Experiment Penning trap setup, which features various ion-target preparation techniques including selection, cooling, compression, and positioning as well as destructive and non-destructive measurement techniques to determine the number of stored ions for all charge states individually and simultaneously. We have recently performed first commissioning experiments of ion deceleration and dynamic ion capture with highly charged ion bunches from an electron beam ion source. We have characterized our single-pass non-destructive ion counter in detail and were able to determine the ion velocity as well as the number of ions from the signals acquired.     

Synthesis of spirooxindolocarbamates based on Betti reaction: antibacterial,antifungal and antioxidant activities

Molecular Diversity - A series of new spirooxindolocarbamates 4a–l and 6a–d were synthesized by using the Betti reaction. All the target compounds were well characterized by IR, NMR and...     

On the occurrence of polytypism in single crystal CdTe thin films

Cadmium telluride thin films have been found to exhibit polytypism. The polytypes are formed when the as grown amorphous CdTe thin films undergo amorphous to crystalline transformation. The transformed single crystal regions correspond to different polytypes. Besides the well known zinc blende type 3 C cubic phase and less often found wurtzite type 2 H phase, four new polytypes (5 H, 6 H, 6 R and 15 R) the only ones known to-date have been found in the present investigation. In addition to the new polytypes, a new structural variant has also been found. This has the same ‘c’ parameter as that of the 2 H phase but has its ‘a’ lattice parameter as ‘a₀ \documentclass{article}\pagestyle{empty}\begin{document}$ a_{\rm o} \sqrt {3} $\end{document}’ (a₀ being the common lattice parameter of the polytypes). A feasible mechanism making the formation of polytypes intelligible has been suggested.     

A Generalized Measure of Cumulative Residual Entropy

In this work, we introduce a generalized measure of cumulative residual entropy and study its properties. We show that several existing measures of entropy, such as cumulative residual entropy, weighted cumulative residual entropy and cumulative residual Tsallis entropy, are all special cases of this generalized cumulative residual entropy. We also propose a measure of generalized cumulative entropy, which includes cumulative entropy, weighted cumulative entropy and cumulative Tsallis entropy as special cases. We discuss a generating function approach, using which we derive different entropy measures. We provide residual and cumulative versions of Sharma–Taneja–Mittal entropy and obtain them as special cases this generalized measure of entropy. Finally, using the newly introduced entropy measures, we establish some relationships between entropy and extropy measures.     

Electro chemical properties of porous PVdF-HFP membranes prepared with different nonsolvents

Porous poly(vinylidene fluoride-hexafluoropropylene) (PVdF-HFP) membranes were prepared by solvent–nonsolvent evaporation technique. Morphology and porosity of the membranes were varied with different nonsolvents and had an effect on electrochemical properties. The porous membranes were functionalized with different liquid electrolyte solutions such as p-toluene sulfonic acid/phosphoric acid/sulfuric acid. Maximum electrolyte uptake and minimal electrolyte leakage were tailored by the optimized porosity of the membranes. Thermal behavior obtained in this study ensures the complete evaporation of nonsolvents and ensures its thermal stability. The pTSA-activated PVdF-HFP/THF membrane exhibited high ionic conductivity of about 27.27 mS/cm and a lower methanol permeability in the range of 9.7 × 10⁻⁸ cm²/s. High compatibility between pTSA solution and porous PVdF-HFP polymer electrolyte membrane enhances its electro chemical behavior than that of conventional liquid electrolytes.     

Recent advances in application of the graphene-based membrane for water purification

Graphene is an atomic layer thick carbon-based material with unique two-dimensional architecture and extraordinary physiochemical, optical, electrical, and mechanical properties. Graphene and its derivatives show significant promises for the development of nanoporous ultrathin filtration membranes capable of molecular separation properties. Graphene-based nanofiltration membranes featuring distinct laminar structures can offer various novel mass-transport phenomena for purifying water, energy storage and separation, gas separation, and proton conductors. The latest developments in water purification techniques through graphene-based membranes including engineering, design, and fabrication of diverse graphene, graphene-oxide, and graphene-composite membranes are provided here in relation to their application paradigm for purifying water. The critical views on pollutant removal mechanisms for water purification along with optimization measures are specially highlighted. In addition, the challenges, shortcomings, and future prospects are pointed out. The green and large-scale synthesis technology of graphene coupling with advanced membrane fabrication techniques can promote these state-of-the-art nanofiltration membranes for a wide range of applications.     

Simultaneous quantitation of rosuvastatin and gemfibrozil in human plasma by high-performance liquid chromatography and its application to a pharmacokinetic study

A simple, sensitive and specific high-performance liquid chromatography method is described for simultaneous determination of rosuvastatin (RST) and gemfibrozil (GFZ) in human plasma using celecoxib as an internal standard (IS). The assay procedure involved extraction of RST, GFZ and IS from plasma into acetonitrile. Following separation and evaporation of the organic layer the residue was reconstituted in the mobile phase and injected onto an X-Terra C(18) column (4.6 x 150 mm, 5.0 microm). The chromatographic run time was less than 20 min using flow gradient (0.0-1.60 mL/min) with a mobile phase consisting of 0.01 M ammonium acetate:acetonitrile:methanol (50:40:10, v/v/v) and UV detection at 275 nm. Nominal retention times of RST, GFZ and IS were 6.7, 13.9 and 16.4 min, respectively. Absolute recovery of both analytes and IS was greater than 90%. The lower limit of quantification (LLOQ) of RST and GFZ was 0.03 and 0.30 microg/mL, respectively. Linearity was excellent (r(2) = 0.999) in the 0.03-10 microg/mL and 0.3-100 microg/mL ranges for RST and GFZ, respectively. The inter- and intra-day precisions in the measurement of RST quality control (QC) samples 0.03, 0.09, 2.50 and 8.00 microg/mL were in the range 2.37-9.78% relative standard deviation (RSD) and 0.92-10.08% RSD, respectively. Similarly, the inter- and intra-day precisions in the measurement of GFZ quality control (QC) samples 0.30, 0.90, 25.0 and 80.0 microg/mL were in the ranges 2.79-6.27 and 0.96-9.69% RSD, respectively. Accuracies in the measurement of QC samples for RST and GFZ were in the range 85.43-107.23 and 84.98-102.35% respectively, of the nominal values. RST and GFZ were stable in the array of stability studies viz., bench-top, auto-sampler and freeze-thaw cycles. Stability of RST and GFZ was established for 1 month at -80C. The application of the assay in an oral pharmacokinetic study in rats co-administered with RST and GFZ is described.