Pseudo-Octahedral Iron(II) Complexes with Near-Degenerate Charge Transfer and Ligand Field States at the Franck-Condon Geometry

Increasing the metal-to-ligand charge transfer (MLCT) excited state lifetime of polypyridine iron(II) complexes can be achieved by lowering the ligand's π* orbital energy and by increasing the ligand field splitting. In the homo- and heteroleptic complexes [Fe(cpmp)₂]²⁺ ( 1²⁺ ) and [Fe(cpmp)(ddpd)]²⁺ ( 2²⁺ ) with the tridentate ligands 6,2’’-carboxypyridyl-2,2’-methylamine-pyridyl-pyridine (cpmp) and N,N’-dimethyl-N,N’-di-pyridin-2-ylpyridine-2,6-diamine (ddpd) two or one dipyridyl ketone moieties provide low energy π* acceptor orbitals. A good metal-ligand orbital overlap to increase the ligand field splitting is achieved by optimizing the octahedricity through CO and NMe units between the coordinating pyridines which enable the formation of six-membered chelate rings. The push-pull ligand cpmp provides intra-ligand and ligand-to-ligand charge transfer (ILCT, LL'CT) excited states in addition to MLCT excited states. Ground and excited state properties of 1²⁺ and 2²⁺ were accessed by X-ray diffraction analyses, resonance Raman spectroscopy, (spectro)electrochemistry, EPR spectroscopy, X-ray emission spectroscopy, static and time-resolved IR and UV/Vis/NIR absorption spectroscopy as well as quantum chemical calculations.     

Antibiofilm,Anti-Quorum Sensing Activities,and Molecular Docking Studies of Seriphidium quettense Essential Oil

Chemistry of Natural Compounds -     

Bio-Potency and Molecular Docking Studies of Isolated Compounds from Grewia optiva J.R. Drumm. ex Burret

In the study, two novel compounds along with two new compounds were isolated from Grewia optiva. The novel compounds have never been reported in any plant source, whereas the new compounds are reported for the first time from the studied plant. The four compounds were characterized as: 5,5,7,7,11,13-hexamethyl-2-(5-methylhexyl)icosahydro-1H-cyclopenta[a]chrysen-9-ol (IX), docosanoic acid (X), methanetriol mano formate (XI) and 2,2’-(1,4-phenylene)bis(3-methylbutanoic acid (XII). The anticholinesterase, antidiabetic, and antioxidant potentials of these compounds were determined using standard protocols. All the isolated compounds exhibited a moderate-to-good degree of activity against acetylcholinesterases (AChE) and butyrylcholinesterase (BChE). However, compound XII was particularly effective with IC₅₀ of 55 μg/mL (against AChE) and 60 μg/mL (against BChE), and this inhibitory activity is supported by in silico docking studies. The same compound was also effective against DPPH (2,2-diphenyl-1-picrylhydrazyl) and ABTS (2,2′-azinobis-3-ethylbenzothiazoline-6-sulfonic acid) radicals with IC₅₀ values of 60 and 62 μg/mL, respectively. The compound also significantly inhibited the activities of α-amylase and α-glucosidase in vitro. The IC₅₀ values for inhibition of the two enzymes were recorded as 90 and 92 μg/mL, respectively. The in vitro potentials of compound XII to treat Alzheimer’s disease (in terms of AchE and BChE inhibition), diabetes (in terms of α-amylase and α-glucosidase inhibition), and oxidative stress (in terms of free radical scavenging) suggest further in vivo investigations of the compound for assessing its efficacy, safety profile, and other parameters to proclaim the compound as a potential drug candidate.     

Cholinesterase inhibiting and antiplasmodial steroidal alkaloids from Sarcococca hookeriana

Bioguided phytochemical investigation of Sarcococca hookeriana with respect to the cholinesterase enzyme inhibitory assay yielded two new pregnane-type steriodal alkaloids hookerianamide H (1) and hookerianamide I (2), along with three known alkaloids N(a)-methylepipachysamine D (3), sarcovagine C (4) and dictyophlebine (5). Their structures were determined with the aid of extensive spectroscopic analysis. All compounds showed good inhibitory activities against the enzymes acetylcholinesterase (IC(50) 2.9-34.1 microM) and butyrylcholinesterase (IC(50) 0.3-3.6 microM). These compounds also showed moderate antiplasmodial activity (IC(50) 2.4-10.3 microM) against the Plasmodium falciparum chloroquine resistant W2 strain.     

Nonenzymatic dopamine biosensor based on tannin nanocomposite

A dopamine (DA) biosensor was developed based on polypyrrole/tannin/cetyltrimethylammonium bromide (PPy/TA/CTAB) nanocomposite and central composite rotatable design (CCRD) was employed for the optimization of conditions. Chemical polymerization of the PPy/TA in the presence of a cationic surfactant, CTAB, reduced the particle size of composite and a rod-like structure with a lumpy surface and high porosity was observed for nanocomposite justifying the highest current response for the modified electrode. Amperometry and differential pulse voltammetry analyses were applied for all electrochemical measurements and DA detection in the range of 0.5–100 μM. The good adhesion of nanocomposite on the electrode surface, as well as porosity and high surface area of the modified electrode, enhanced the diffusion of DA molecules inside the matrix. Amperometry analysis of the Screen printed carbon electrode/PPy/TA/CTAB modified electrode displayed a good sensitivity of 0.039 μA (μM)⁻¹ toward DA with the limit of detection of 2.9 × 10^–7 M. The modified biosensor also excludes the interfering species of ascorbic acid and uric acid which makes this sensor appropriate for DA determination. The proposed biosensor showed an acceptable reproducibility and repeatability with low relative standard deviations of 4.8% and 4.4%, respectively.     

Highly ordered combined structure of anodic TiO2 nanotubes and TiO2 nanoparticles prepared by a novel route for dye-sensitized solar cells

Combined structure of anodic TiO₂ nanotubes and TiO₂ nanoparticles (TiNTs-TiNPs) has been synthesized by a facile combination of hydrothermal and chemical vapor deposition methods. Ordered TiO₂ nanotubes with smooth walls were fabricated by two step anodization method in ethylene glycol containing NH₄F at 50 V. This nanotubular array after annealing at 450 °C was subjected to the hydrothermally produced gaseous environment in an autoclave with diluted TiCl₄ solution at its bottom. Vapors of TiCl₄ were allowed to react chemically with water vapors for predefined time durations at 180 °C that resulted in the deposition of TiO₂ nanoparticles on tubes’ surface and side walls. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) confirmed that for one hour reaction duration, nanoparticles were evenly coated on the walls of nanotubes, whereas, longer durations tend to deteriorate the tubular structure. Consequently, the ordered TiNTs-TiNPs array produced after one hour coating has shown better performance for dye-sensitized solar cell DSSC) in back illumination mode with 130% increase in efficiency as compared to the device based on bare TiO₂ nanotubes. The same photoanode has higher reflective properties with higher scattering ability. The solar cell based on this photoanode exhibits higher external quantum efficiency and effective charge transport properties. This study shows that porous ordered 1D structures based on TiO₂ are of crucial importance for the high performance of DSSCs.     

Effect of Excitation and Vibrational Temperature on the Dissociation of Nitrogen Molecules in Ar-N2 Mixture RF Discharge

Non-equilibrium argon-nitrogen mixture plasma generated at 13.56 MHz is characterized by optical emission spectroscopy and Langmuir probe techniques. The excitation and vibrational temperature are studied as a function of argon percentage in the mixture, at 30-Pa filling pressure and input RF powers of 200 and 300 watt, to find out their role in dissociation of N₂ molecules. In this work, the excitation temperature is determined from Ar-I emission line intensities by using the simple Boltzmann plot method and is found to increase with argon mixing in nitrogen plasma. In similar fashion, the vibrational temperature of second positive system has been determined and is found to also have increasing trend with argon addition. The effect of excitation and vibrational temperature on the nitrogen molecular dissociation level is also monitored. It is observed that N/N ₂ ratio increases with increase in excitation and vibrational temperature and falls slightly at the end.     

Conservation laws via the partial Lagrangian and group invariant solutions for radial and two-dimensional free jets

The conservation laws for Prandtl’s boundary layer equations for an incompressible fluid governing the flow in radial and two-dimensional jets are investigated. For both radial and two-dimensional jets the partial Lagrangian method is used to derive conservation laws for the system of two differential equations for the velocity components. The Lie point symmetries are calculated for both cases and a symmetry is associated with the conserved vector that is used to establish the conserved quantity for the jet. This associated symmetry is then used to derive the group invariant solution for the system governing the flow in the free jet.     

Robust formulations for economic lot-sizing problem with remanufacturing

In this paper, we consider a lot-sizing problem with the remanufacturing option under parameter uncertainties imposed on demands and returns. Remanufacturing has recently been a fast growing area of interest for many researchers due to increasing awareness on reducing waste in production environments, and in particular studies involving remanufacturing and parameter uncertainties simultaneously are very scarce in the literature. We first present a min-max decomposition approach for this problem, where decision maker’s problem and adversarial problem are treated iteratively. Then, we propose two novel extended reformulations for the decision maker’s problem, addressing some of the computational challenges. An original aspect of the reformulations is that they are applied only to the latest scenario added to the decision maker’s problem. Then, we present an extensive computational analysis, which provides a detailed comparison of the three formulations and evaluates the impact of key problem parameters. We conclude that the proposed extended reformulations outperform the standard formulation for a majority of the instances. We also provide insights on the impact of the problem parameters on the computational performance.