Cranberry changes the physicochemical surface properties of E. coli and adhesion with uroepithelial cells

Cranberries have been suggested to decrease the attachment of bacteria to uroepithelial cells (UC), thus preventing urinary tract infections, although the mechanisms are not well understood. A thermodynamic approach was used to calculate the Gibbs free energy of adhesion changes (DeltaG(adh)) for bacteria-UC interactions, based on measuring contact angles with three probe liquids. Interfacial tensions and DeltaG(adh) values were calculated for Escherichia coli HB101pDC1 (P-fimbriated) and HB101 (non-fimbriated) exposed to cranberry juice (0-27 wt.%). HB101pDC1 can form strong bonds with the Gal-Gal disaccharide receptor on uroepithelial cells, while HB101-UC interactions are only non-specific. For HB101 interacting with UC, DeltaG(adh) was always negative, suggesting favorable adhesion, and the values were insensitive to cranberry juice concentration. For the HB101pDC1-UC system, DeltaG(adh) became positive at 27wt.% cranberry juice, suggesting that adhesion was unfavorable. Acid-base (AB) interactions dominated the interfacial tensions, compared to Lifshitz-van der Waals (LW) interactions. Exposure to cranberry juice increased the AB component of the interfacial tension of HB101pDC1. LW interactions were small and insensitive to cranberry juice concentration. The number of bacteria attached to UC was quantified in batch adhesion assays and quantitatively correlated with DeltaG(adh). Since the thermodynamic approach should not agree with the experimental results when specific interactions are present, such as HB101pDC-UC ligand-receptor bonds, our results may suggest that cranberry juice disrupts bacterial ligand-UC receptor binding. These results help form the mechanistic explanation of how cranberry products can be used to prevent bacterial attachment to host tissue, and may lead to the development of better therapies based on natural products.     

Electrospray tandem mass spectrometry of beta-nitroalkenyl meso-tetraphenylporphyrins

Beta-nitroalkenyl meso-tetraphenylporphyrins [beta-TPPCHC(NO(2))R)], as free-bases and Zn(II) complexes, were studied by electrospray mass spectrometry (ESI-MS). Under this ionisation condition the [M + H](+) ions are formed. The fragmentation pattern of the resulting [M + H](+) ions were studied by electrospray tandem mass spectrometry (ESI-MS/MS). The ESI-MS/MS of beta- nitroalkenylporphyrins, either as free-bases or as Zn(II) complexes, show several interesting features, distinct from the typical behaviour of nitro compounds. For the studied compounds, common main fragmentation patterns are observed, namely characteristic losses of NO(2), HNO(2), 2OH, RNO(2), RCNO, RCNO(2), RCH(2)NO(2), C(6)H(5) plus NO(2) and the formation of the protonated macrocycle, [TPP + H](+) or [ZnTPP + H](+). However, depending on the presence or absence of the metal and the nature of the R substituent, important differences are observed on the relative abundances of the ions formed by the same fragmentation pathway. The presence of bromine in the alkenyl group leads to a peculiar behaviour, since the main fragmentation pattern corresponds to the combined elimination of the bromine atom with the typical nitro group fragments. When R = Br, the loss of the nitro group occurs in low relative abundance (11-16%). However, when R = CH(3), the relative abundance of the ion due to the loss of HNO(2) changes drastically from 100%, observed for the free-base porphyrin, to 29% in the case of the Zn(II) complex. These variations of the relative abundance of the fragment corresponding to the loss of the nitro moiety (typically considered as a diagnostic fragment) can induce to an erroneous interpretation of their MS/MS spectra. Some fragmentations are observed only for the free-base porphyrins, namely the loss of CH(NO(2)R and HNO(2) plus C(2)H(2), while the loss of OH, H(2)O, OH plus H(2)O and RCCH plus H(2)O is observed only for the complexes. Unusual and unexpected fragmentations are also observed, namely the losses of RCNO, RCNO(2) and HNO(2) plus C(2)H(2). This work demonstrates that valuable structural information about the beta-nitroalkenyl substituents linked to meso- tetraarylporphyrins can be achieved using MS/MS. These results can also be useful for the interpretation of the mass spectra of other nitroalkenyl substituted compounds.     

Per-6-O-(tert-butyldimethylsilyl)cyclodextrins (TBDMS-CDs) in Langmuir monolayers: the importance of a spreading solvent in the preparation of LB layers suitable for sensor application

Commercially available amphiphilic cyclodextrins, namely per-6-O-(tert-butyldimethylsilyl) alpha, beta and gamma cyclodextrins (TBDMS-alpha-, -beta-, and -gamma-CDs) were subjected to a thorough Langmuir monolayer characterization, using both traditional methods of surface manometry (pi/A isotherms, stability experiments) and modern micrometer/nanometer resolution (BAM, AFM) surface techniques. It has been found that inconsistent behavior regarding the isotherms reproducibility obtained upon compression of TBDMS-beta-CDs is due to the aggregation of the investigated molecules in chloroform and hexane, while good reproducibility ensured a mixed spreading solvent system of hexane/isopropanol 7:3 (v/v). Although the stability of films dropped from chloroform and hexane/isopropanol solvents below the equilibrium surface pressure (ESP) was comparable, pronounced differences were observed at pressures above ESP. The investigated TBDMS-CDs were successfully transferred onto cadmium stearate covered mica substrates. AFM images confirmed the presence of discontinuous multilayered films (10 nm heights) spread from chloroform versus monomolecular dispersion achieved in hexane/isopropanol.     

Simultaneous determination of major to ultratrace elements in geological samples by fusion-dissolution and inductively coupled plasma mass spectrometry techniques

A method has been developed for the simultaneous quantification of major to ultratrace elements in geological samples using quadrupole ICP-MS techniques. The sample preparation involves fusion with LiBO₂ and dilution in HNO₃-HF which allows complete decomposition of refractory minerals and quantification of the elements of interest. The effects of high Total Dissolved Solids (TDS) and Li in the solution are minimized using a matrix-tolerant interface and conditioning the instrument with LiBO₂ solution. The signal drift is moreover controlled using conventional internal standards and specific Drift Correction Standards (DCS). A key issue of the technique is the external calibration using selected Certified Reference Materials (CRM). Depending on the sample type and analytes of interest three optimized programmable modes are used sequentially: Standard, Collision Cell (CCT) and Kinetic Energy Discrimination (KED) mode. The method allows to quantify more than 40 elements in concentrations from tens-of-percent to <0.1 ppm levels during a single experiment. The method has been validated through the analysis of different CRMs with recovery factors of ca. 100% and typical 2σ errors of <10%.     

Synthesis of novel enantiopure 4-hydroxypipecolic acid derivatives with a bicyclic beta-lactam structure from a common 3-azido-4-oxoazetidine-2-carbaldehyde precursor

Two different stereocontrolled accesses to new 4-hydroxypipecolic acid analogues with a bicyclic beta-lactam structure have been developed by using intramolecular reductive amination or allenic hydroamination reactions in 2-azetidinone-tethered azides. The access to the cyclization precursors was achieved from 3-azido-4-oxoazetidine-2-carbaldehyde via metal-mediated carbonyl-allenylation in aqueous environment or by organocatalytic direct aldol reaction. The tin hydride-promoted cyclization of the 2-azetidinone-tethered azidoallene is totally regioselective for the central allenic carbon providing a fused piperidine.     

Catalytic Enantioselective Conjugate Alkynylation of α,β‐Unsaturated 1,1,1‐Trifluoromethyl Ketones with Terminal Alkynes

The first catalytic enantioselective conjugate alkynylation of α,β‐unsaturated 1,1,1‐trifluoromethyl ketones has been carried out. Terminal alkynes and 1,3‐diynes were treated with trifluoromethyl ketones in the presence of a low catalytic load of a Cu^I‐MeOBIPHEP complex (2.5 mol %) and triethylamine (10 mol %) to give the corresponding trifluoromethyl ketones bearing a propargylic stereogenic center at the β position with good yields and excellent enantiomeric excesses in most of the cases. No 1,2‐addition products were formed under the reaction conditions. The procedure showed broad substrate scope for alkyne, diyne, and enone. A rationale for the observed stereochemistry has been provided. Finally, the potential application of the reaction products in the synthesis of chiral tetrahydrofurans bearing a trifluoromethylated quaternary stereocenter has been devised.     

Examining the effect of chain length polydispersity on the phase behavior of polymer solutions with the statistical associating fluid theory (Wertheim TPT1) using discrete and continuous distributions

Polymers are naturally polydisperse. Polydispersity may have a large effect on the phase behavior of polymer solutions, in particular, on the liquid-liquid phase equilibria. In this paper, we determine the cloud and shadow curves bounded by lower critical solution temperatures for a number of polymer+solvent systems where the polymer is polydisperse in terms of molecular weight (chain length). The moment method [P. Sollich, P. B. Warren, and M. E. Cates, Adv. Chem. Phys. 116, 265 (2001)] is applied with the SAFT approach to determine cloud and shadow curves with continuous Schulz-Flory distributions. It is seen that chain length polydispersity always enhances the extent of liquid-liquid phase equilibria. The predicted cloud curves obtained for continuous distributions are very similar to those obtained for simple ternary mixtures with the same polydispersity index, while the corresponding shadow curves can be very different depending on the composition of the parent distribution. The ternary phase behavior can be used to provide an understanding of the shape of the cloud and shadow curves. Regions of phase equilibria between three liquid phases are found for ternary systems when the chain length distribution is very asymmetrical; such regions are not observed for Schulz-Flory distributions even in the case of a large degree of polydispersity.     

Sensitive determination of free benzophenone-3 in human urine samples based on an ionic liquid as extractant phase in single-drop microextraction prior to liquid chromatography analysis

Benzophenone-3 (BZ3), one of the compounds most commonly used as UV filter in cosmetic products, can be absorbed through the skin into the human body, since it can be found at trace levels in urine from users of cosmetic products that contain BZ3. Moreover, different undesirable effects have been attributed to this compound. Thus, sensitive analytical methods to monitor urinary excretion of this compound should be developed. This paper presents a selective and sensitive methodology for BZ3 determination at ultratrace levels in human urine samples. The methodology is based on a novel microextraction technique, known as single-drop microextraction (SDME). An ionic liquid (IL) has been used as extractant phase instead of an organic solvent. After the microextraction process, the extractant phase was injected into a liquid chromatography system. The variables of interest in the SDME process were optimized using a multivariate optimization approach. A Plackett-Burman design for screening and a circumscribed central composite design for optimizing the significant variables were applied. Ionic strength, extraction time, stirring speed, pH, ionic liquid type, drop volume and sample volume were the variables studied. The optimum experimental conditions found were: sodium chloride concentration, 13% (w/v); extraction time, 25 min; stirring speed, 900 rpm; pH, 2; ionic liquid type, 1-hexyl-3-methylimidazolium hexafluorophosphate ([C(6)MIM][PF(6)]); drop volume, 5 microL; and sample volume, 10 mL. The proposed method requires a standard addition calibration approach, and it has been successfully employed to determine free BZ3 in urine samples coming from human volunteers who applied a sunscreen cosmetic containing this UV filter. The limit of detection was in the order of 1.3 ng mL(-1) and repeatability of the method, expressed as relative standard deviation, was 6% (n=8).     

Gas-phase structure, rotational barrier, and vibrational properties of methyl methanethiosulfonate, CH3SO2SCH3: an experimental and computational study

The molecular structure of methyl methanethiosulfonate, CH3SO2SCH3, has been determined in the gas phase from electron-diffraction data supplemented by ab initio (HF, MP2) and density functional theory (DFT) calculations using 6-31G(d), 6-311++G(d,p), and 6-311G(3df,3pd) basis sets. Both experimental and theoretical data indicate that although both anti and gauche conformers are possible by rotating about the S-S bond, the preferred conformation is gauche. The barrier to internal rotation in the CSSC skeleton has been calculated using the RHF/6-31G(d), MP2/6-31G(d), and B3LYP/6-31G(d) methods as well as MP2 with a 6-31G(3df) basis set on sulfur and 6-31G(d) on C, H, and O. A 6-fold decomposition of the rotational barrier has been performed in terms of a Fourier-type expansion, enabling us to analyze the nature of the potential function, showing that the coefficients V1 and V2 are the dominant terms; V1 is associated with nonbonding interactions, and V2 is associated with hyperconjugative interactions. A natural bond orbital analysis showed that the lone pair --> sigma* hyperconjugative interactions favor the gauche conformation. Furthermore, the infrared spectra for the liquid and solid phases and the Raman spectrum for the liquid have been recorded, and the observed bands have been assigned to the vibrational normal modes. The experimental vibrational data, along with calculated theoretical force constants, were used to define a scaled quantum mechanical force field for the target system that enabled us to estimate the measured frequencies with a final root-mean-square deviation of 6 cm-1.     

Influence of the Storage of Cistus ladanifer L. Bales from Mechanised Harvesting on the Essential Oil Yield and Qualitative Composition

Cistus ladanifer is a Mediterranean native plant from which valuable products, such as essential oil, are obtained. Manual harvesting of the plants in wild shrublands is usual during short periods of time. Their mechanised harvesting could increase the volume of harvested plants and prevent fires, further storage of the plants collected being necessary. The objective of this work is to study the influence of the storage period of mechanically harvested bales on the essential oil yield and qualitative composition. The harvesting trials were carried out with an adapted commercial harvester baler and the storage of the bales was performed indoors during 1–7 days, 15–30 days and 100–120 days. Afterwards, the bales were crushed (30 mm) and distilled in a 30 litre stainless steel still with saturated steam (0.5 bar). The essential oil components were identified by GC-MS and quantified by GC-FID. The storage of mechanically harvested Cistus ladanifer does not decrease the oil yield of steam distillation on a pilot scale. However, it leads to differences in the quantitative composition of the essential oils, decreasing the total monoterpene compounds content and increasing that of oxygenated sesquiterpenes, especially when the biomass is stored for 100–120 days, without affecting its qualitative composition.