Lemon Oils Attenuate the Pathogenicity of Pseudomonas aeruginosa by Quorum Sensing Inhibition

The chemical composition of three Citrus limon oils: lemon essential oil (LEO), lemon terpenes (LT) and lemon essence (LE), and their influence in the virulence factors production and motility (swarming and swimming) of two Pseudomonas aeruginosa strains (ATCC 27853 and a multidrug-resistant HT5) were investigated. The main compound, limonene, was also tested in biological assays. Eighty-four compounds, accounting for a relative peak area of 99.23%, 98.58% and 99.64%, were identified by GC/MS. Limonene (59–60%), γ-terpinene (10–11%) and β-pinene (7–15%) were the main compounds. All lemon oils inhibited specific biofilm production and bacterial metabolic activities into biofilm in a dose-dependent manner (20–65%, in the range of 0.1–4 mg mL⁻¹) of both strains. Besides, all samples inhibited about 50% of the elastase activity at 0.1 mg mL⁻¹. Pyocyanin biosynthesis decreases until 64% (0.1–4 mg mL⁻¹) for both strains. Swarming motility of P. aeruginosa ATCC 27853 was completely inhibited by 2 mg mL⁻¹ of lemon oils. Furthermore, a decrease (29–55%, 0.1–4 mg mL⁻¹) in the synthesis of Quorum sensing (QS) signals was observed. The oils showed higher biological activities than limonene. Hence, their ability to control the biofilm of P. aeruginosa and reduce the production of virulence factors regulated by QS makes lemon oils good candidates to be applied as preservatives in the food processing industry.     

Miscibility in poly(L-lactide)- b -poly( $ \upvarepsilon$ -caprolactone) double crystalline diblock copolymers

Thermally stimulated depolarization currents, TSDC, wide-angle X-ray scattering, WAXS, differential scanning calorimetry, DSC, and polarized light optical microscopy, PLOM, have been used to examine poly(L-lactide)-b -poly( -caprolactone) diblock copolymers in a wide composition range. Both components are crystallizable and the miscibility in the amorphous phase has been determined from the behavior of the primary relaxations which are the dielectric manifestation of the glass transition, and also from the superstructural morphology revealed by PLOM and the compositional dependence of the melting points as determined by DSC. Distinct segmental mobilities in the amorphous phase which can be well resolved by TSDC are present; the mode of the slower component shifts to lower temperatures as the PCL content increases while the glass transition of neat PCL is present for all compositions. A relaxation times bimodal distribution is apparent for PCL-rich copolymers. The composition dependence of the multiple glass transitions detected in these weakly segregated copolymers are predicted by the self-concentration model for a miscible blend made of components with a large T_g contrast.     

Peptide Dimethylation: Fragmentation Control via Distancing the Dimethylamino Group

Direct reductive methylation of peptides is a common method for quantitative proteomics. It is an active derivatization technique; with participation of the dimethylamino group, the derivatized peptides preferentially release intense a₁ ions. The advantageous generation of a₁ ions for quantitative proteomic profiling, however, is not desirable for targeted proteomic quantitation using multiple reaction monitoring mass spectrometry; this mass spectrometric method prefers the derivatizing group to stay with the intact peptide ions and multiple fragments as passive mass tags. This work investigated collisional fragmentation of peptides whose amine groups were derivatized with five linear ω-dimethylamino acids, from 2-(dimethylamino)-acetic acid to 6-(dimethylamino)-hexanoic acid. Tandem mass spectra of the derivatized tryptic peptides revealed different preferential breakdown pathways. Together with energy resolved mass spectrometry, it was found that shutting down the active participation of the terminal dimethylamino group in fragmentation of derivatized peptides is possible. However, it took a separation of five methylene groups between the terminal dimethylamino group and the amide formed upon peptide derivatization. For the first time, the gas-phase fragmentation of peptides derivatized with linear ω-dimethylamino acids of systematically increasing alkyl chain lengths is reported. Figure

?     

Synthesis of New Chlorin e6 Trimethyl and Protoporphyrin IX Dimethyl Ester Derivatives and Their Photophysical and Electrochemical Characterizations

In view of increasing demands for efficient photosensitizers for photodynamic therapy (PDT), we herein report the synthesis and photophysical characterizations of new chlorin e₆ trimethyl ester and protoporphyrin IX dimethyl ester dyads as free bases and Zn^II complexes. The synthesis of these molecules linked at the β‐pyrrolic positions to pyrano[3,2‐c]coumarin, pyrano[3,2‐c]quinolinone, and pyrano[3,2‐c]naphthoquinone moieties was performed by using the domino Knoevenagel hetero Diels–Alder reaction. The α‐methylenechromanes, α‐methylenequinoline, and ortho‐quinone methides were generated in situ from a Knoevenagel reaction of 4‐hydroxycoumarin, 4‐hydroxy‐6‐methylcoumarin, 4‐hydroxy‐N‐methylquinolinone, and 2‐hydroxy‐1,4‐naphthoquinone, respectively, with paraformaldehyde in dioxane. All the dyads as free bases and as Zn^II complexes were obtained in high yields. All new compounds were fully characterized by 1D and 2D NMR techniques, UV/Vis spectroscopy, and HRMS. Their photophysical properties were evaluated by measuring the fluorescence quantum yield, the singlet oxygen quantum yield by luminescence detection, and also the triplet lifetimes were correlated by flash photolysis and intersystem crossing (ISC) rates. The fluorescence lifetimes were measured by a time‐correlated single photon count (TCSPC) method, fluorescence decay associated spectra (FDAS), and anisotropy measurements. Magnetic circular dichroism (MCD) and circular dichroism (CD) spectra were recorded for one Zn^II complex in order to obtain information, respectively, on the electronic and conformational states, and interpretation of these spectra was enhanced by molecular orbital (MO) calculations. Electrochemical studies of the Zn^II complexes were also carried out to gain insights into their behavior for such applications.     

Enhanced Thermal Oxidation Stability of Reduced Graphene Oxide by Nitrogen Doping

Nitrogen‐doped reduced graphene oxide (N‐doped RGO) samples with a high level of doping, up to 13 wt. %, have been prepared by annealing graphene oxide under a flow of pure ammonia. The presence of nitrogen within the structure of RGO induces a remarkable increase in the thermal stability against oxidation by air. The thermal stability is closely related with the temperature of synthesis and the nitrogen content. The combustion reaction of nitrogen in different coordination environments (pyridinic, pyrrolic, and graphitic) is analyzed against a graphene fragment (undoped) from a thermodynamic point of view. In agreement with the experimental observations, the combustion of undoped graphene turns out to be more spontaneous than when nitrogen atoms are present.     

An Efficient RuII–RhIII–RuII Polypyridyl Photocatalyst for Visible‐Light‐Driven Hydrogen Production in Aqueous Solution

The development of multicomponent molecular systems for the photocatalytic reduction of water to hydrogen has experienced considerable growth since the end of the 1970s. Recently, with the aim of improving the efficiency of the catalysis, single‐component photocatalysts have been developed in which the photosensitizer is chemically coupled to the hydrogen‐evolving catalyst in the same molecule through a bridging ligand. Until now, none of these photocatalysts has operated efficiently in pure aqueous solution: a highly desirable medium for energy‐conversion applications. Herein, we introduce a new ruthenium–rhodium polypyridyl complex as the first efficient homogeneous photocatalyst for H₂ production in water with turnover numbers of several hundred. This study also demonstrates unambiguously that the catalytic performance of such systems linked through a nonconjugated bridge is significantly improved as compared to that of a mixture of the separate components.     

Spin State Tunes Oxygen Atom Transfer towards FeIVO Formation in FeII Complexes

Oxoiron(IV) complexes bearing tetradentate ligands have been extensively studied as models for the active oxidants in non-heme iron-dependent enzymes. These species are commonly generated by oxidation of their ferrous precursors. The mechanisms of these reactions have seldom been investigated. In this work, the reaction kinetics of complexes [Fe^II(CH₃CN)₂L](SbF₆)₂ ( [1](SbF₆)₂ and [2](SbF₆)₂ ) and [Fe^II(CF₃SO₃)₂L] ( [1](OTf)₂ and [2](OTf)₂ ( 1 , L=^Me,HPytacn; 2 , L=^nP,HPytacn; ^R,R′Pytacn=1-[(6-R′-2-pyridyl)methyl]-4,7- di-R-1,4,7-triazacyclononane) with Bu₄NIO₄ to form the corresponding [Fe^IV(O)(CH₃CN)L]²⁺ ( 3 , L=^Me,HPytacn; 4 , L=^nP,HPytacn) species was studied in acetonitrile/acetone at low temperatures. The reactions occur in a single kinetic step with activation parameters independent of the nature of the anion and similar to those obtained for the substitution reaction with Cl⁻ as entering ligand, which indicates that formation of [Fe^IV(O)(CH₃CN)L]²⁺ is kinetically controlled by substitution in the starting complex to form [Fe^II(IO₄)(CH₃CN)L]⁺ intermediates that are converted rapidly to oxo complexes 3 and 4 . The kinetics of the reaction is strongly dependent on the spin state of the starting complex. A detailed analysis of the magnetic susceptibility and kinetic data for the triflate complexes reveals that the experimental values of the activation parameters for both complexes are the result of partial compensation of the contributions from the thermodynamic parameters for the spin-crossover equilibrium and the activation parameters for substitution. The observation of these opposite and compensating effects by modifying the steric hindrance at the ligand illustrates so far unconsidered factors governing the mechanism of oxygen atom transfer leading to high-valent iron oxo species.     

Computing Complex Airy Functions by Numerical Quadrature

Integral representations are considered of solutions of the Airy differential equation w –zw=0 for computing Airy functions for complex values of z. In a first method contour integral representations of the Airy functions are written as non-oscillating integrals for obtaining stable representations, which are evaluated by the trapezoidal rule. In a second method an integral representation is evaluated by using generalized Gauss–Laguerre quadrature; this approach provides a fast method for computing Airy functions to a predetermined accuracy. Comparisons are made with well-known algorithms of Amos, designed for computing Bessel functions of complex argument. Several discrepancies with Amos' code are detected, and it is pointed out for which regions of the complex plane Amos' code is less accurate than the quadrature algorithms. Hints are given in order to build reliable software for complex Airy functions.