Carboxymethylcellulose obtained by ethanol/water organosolv process under acid conditions

Sugar cane bagasse pulps were obtained by ethanol/water organosolv process under acid and alkaline conditions. The best condition of acid pulping for the sugarcane bagasse was 0.02 mol/L sulfuric acid at 160 degrees C, for 1 h, whereas the best condition for alkaline pulping was 5% sodium hydroxide (base pulp) at 160 degrees C, for 3 h. For the residual lignin removal, the acid and alkaline pulps were submitted to a chemical bleaching using sodium chlorite. Pulps under acid and alkaline conditions bleached with sodium chlorite presented viscosities of 3.6 and 7.8 mPa x s, respectively, and mu-kappa numbers of 1.1 and 2.4, respectively. The pulp under acid condition, bleached with sodium chlorite was used to obtain carboxymethylcellulose (CMC). CMC yield was 35% (pulp based), showing mass gain after the carboxymethylation reaction corresponding to 23.6% of substitution or 0.70 groups -CH(2) COONa per unit of glucose residue. The infrared spectra showed the CMC characteristic bands and by the infrared technique it was possible to obtain a substitution degree (0.63), similar to the substitution degree calculated by mass gain (0.70).     

Chromium (VI) ion adsorption features of chitosan film and its chitosan/zeolite conjugate 13X film

This research evaluated the importance of the adsorption properties of chitosan a chitosan/zeolite conjugate film for the removal of Cr(VI) ions from solutions in the 5-260 mg/L concentration range, when the pH was adjusted to 4.0 and 6.0. The uptake capacities of the films formed by chitosan and by the chitosan/zeolite conjugate were calculated by mass balance. The equilibrium isotherms were fitted to the Langmuir, Freundlich and Redlich-Peterson models. The chitosan film seems to be a good sorbent for Cr(VI) at pH 4, but its physical instability suggests the need for a more resilient support. Due to this fact zeolite was added to the chitosan matrix in solution and a chitosan/zeolite (CS/Zeo) film was thus formed. The solubility of the film and the characterization of the different matrices by FTIR, TGA and X-Ray showed that a cross-linked structure was formed between the chitosan and zeolite and the solubility of the film increased. In this study, the low manufacturing cost of the CS/Zeo matrix, the good uptake of Cr(VI) at acidic pH (17.28 mg/g) and the non desorption of Cr(VI) from the film in water suggests this combination should be tested in industrial environment.     

Augmentation of the Porcine Vocal Fold Using Autologous Composite Cervical Fascia and Fat Graft. Comparison Between the Transmuscular and Submuscular Approaches

Objectives

To assess the integration of an autologous composite fascia and fat graft implanted into the lamina propria of a porcine vocal fold using two different approaches.

Study Design

An experimental prospective study on the porcine larynx was conducted at a tertiary research institution.

Methods

An external cervical approach was used to expose the thyroid cartilage of 24 healthy minipigs under general anesthesia. The composite fascia/fat graft was implanted through two distinct approaches, transmuscular and submuscular. Animals were sacrificed at 7, 30, 90, and 180 days for macroscopic and histological study of the larynx. Graft integration and local inflammatory response were studied.

Results

The survival rate of the experimental model was 100% and all animals had local inflammatory response to the surgical procedure. Only 41.7% of the grafts placed inside the thyroarytenoid (TA) muscle fibers were identified postmortem, whereas 83.3% of the submuscular grafts remained intact.

Conclusions

Graft incorporation was better and there was less inflammation when the architecture of the TA muscle fibers was preserved. Graft extrusion was observed in the most of the cases where it was placed inside the muscle.     

Radionuclide, Metal and Non-metal Levels in Percolated Water from Soils Fertilized with Phosphogypsum

Phosphogypsum (PG) is a by-product of the phosphate fertilizer industry, which is produced by precipitation during the wet process of phosphate rocks. While commercial uses, in agriculture and in manufacturing gypsum board and Portland cement, consume less than a few percent of this by-product, the vast majority is disposed of on land in gypsum. In Brazil, three main industries are responsible for the production and storage of about 5.5 × 10⁶ tons per year. PG may contain trace metals, non-metals, fluorides and natural radionuclides. Since, in Brazil, PG has been used for many years as soil amendment, it is important to know its availability, mainly in aquatic environments used for human consumption. In this case, more restrictive limits must be adopted. This work aimed to evaluate the mobility of metals in sand and clayey soils and, consequently, the contamination of drainage water through greenhouse-scale leaching and transport of toxic elements and radionuclides from soils fertilized with PG to crops. In general, it was observed that elemental concentrations were below the actual detection limit of the equipment for all conditions of interest, indicating a low mobility of the analyzed elements in the soil.     

Determination of cadmium, chromium and lead in marine sediment slurry samples by electrothermal atomic absorption spectrometry using permanent modifiers

A procedure for the determination of cadmium, chromium, and lead in marine sediment slurries by electrothermal atomic absorption spectrometry is proposed. Slurry was prepared by mixing 10 mg of ground sample with particle size smaller than 50 μm completed to the weight of 1.0 g with a 3% nitric acid and 10% hydrogen peroxide solution. The slurry was maintained homogeneous with an aquarium air pump. For cadmium, the best results were obtained using iridium permanent with optimum pyrolysis and atomization temperatures of 400 and 1300 °C, respectively, a characteristic mass, m_o (1% absorption), of 2.3 pg (recommended 1 pg). Without modifier use, zirconium, ruthenium, and rhodium m_o were 3.4, 4.1, 4.6, and 4.8 pg, respectively. For chromium, the most sensitive condition was obtained with zirconium permanent with optimum pyrolysis and atomization temperatures of 1500 and 2500 °C, m_o of 6.6 pg (recommended 5.5 pg); and without modifier use, rhodium, iridium, and ruthenium m_o were 5.3, 8.8, 8.8, and 8.9 pg, respectively. For lead, the best modifier was also zirconium, m_o of 8.3 pg for the optimum pyrolysis and atomization temperatures of 600 and 1400 °C, respectively, (recommended m_o of 9.0 pg). For iridium, ruthenium, without modifier, and rhodium, m_o were 14.7, 15.5, 16.5, and 16.5 pg, respectively. For all the modifiers selected in each case, the peaks were symmetrical with r² higher than 0.99. Being analyzed (n = 10), two marine sediment reference materials (PACS-2 and MESS-2 from NRCC), the determined values, μg l⁻¹, and certified values in brackets, were 2.17 ± 0.05 (2.11 ± 0.15) and 0.25 ± 0.03 (0.24 ± 0.01) for cadmium in PACS-2 and MESS-2, respectively. For chromium in PACS-2 and MESS-2 the values were 94.7 ± 5.6 (90.7 ± 4.6) and 102.3 ± 10.7 (106 ± 8), respectively. Finally, for lead in PACS-2 and MESS-2, the results obtained were 184 ± 7 (183 ± 8) and of 25.2 ± 0.40 (21.9 ± 1.2), respectively. For cadmium and lead in both samples and chromium in PACS-2, calibration was accomplished with aqueous calibration curves. For chromium in MESS-2, only with the standard addition technique results were in agreement with the certified ones. The limits of detection (k = 3, n = 10) obtained with the diluents were 0.1, 3.4, and 3.6 μg l⁻¹ for cadmium, chromium, and lead, respectively.     

In vitro photodynamic inactivation of Candida spp. growth and adhesion to buccal epithelial cells

In this study, photodynamic inactivation (PDI) was used to inhibit in vitro growth and adhesion of different Candida isolates to buccal epithelial cells (BEC). Experimental conditions were optimized and 25 μM toluidine blue O (TBO) and 15 min of irradiation time by light emitting diode (LED) (energy density of 180 J/cm²) were selected due to higher reductions in cellular viability obtained after treatment. Reduction media of Log₁₀ 3.41 in viable cellular growth and media of 55% in the inhibition of adhesion to buccal epithelial cells were obtained. Two fluconazole resistant isolates were susceptible to PDI (Log₁₀ 3.54 in IB05 and Log₁₀ 1.95 in CG09) and a second session of this treatment for CG09 isolate inhibited cellular viability in 100%, without producing heat. The results permit to conclude that photodynamic inactivation under these experimental conditions would be a possible alternative approach to inhibit Candida spp. cellular growth and adhesion to buccal epithelial cells.     

Flavonoid–matrix cluster ions in MALDI mass spectrometry

The behaviour of 2,5‐dihydroxybenzoic acid (2,5‐DHB) matrix under matrix‐assisted laser desorption/ionisation (MALDI) conditions was investigated, and the formation of 2,5‐DHB cluster ions, mainly dehydrated 2,5‐DHB ions, is reported. Interestingly, in the mass spectra of this compound, besides dimers and trimers, protonated tetramers, pentamers, hexamers and heptamers were also found with significant abundance. The MALDI behaviour of four flavonoids, quercetin, myricetin, luteolin and kaempferol, using 2,5‐DHB as matrix, was also investigated. The mass spectra of the flavonoids studied revealed a number of flavonoid–2,5‐DHB cluster ions (mainly with the dehydrated 2,5‐DHB). The number of clusters formed is dependent on the structure of the analyte. For luteolin and kaempferol, in particular, evidence was found for the formation of cluster ions involving retro Diels Alder fragments and intact flavonoids molecules, as well as the corresponding protonated retro Diels Alder fragments with dehydrated DHB molecules. All ion compositions were attributed taking into account high accuracy mass measurements and tandem mass spectrometry experiments. Copyright © 2009 John Wiley & Sons, Ltd.     

Effects of low-level laser irradiation in ultrastructural morphology, and immunoexpression of VEGF and VEGFR-2 of rat masseter muscle

The present study evaluates by ultrastructural and immunohistochemical methods, the possible changes on muscular tissue affected by LLLI during a treatment, for example, in cases of temporomandibular joint disorders. Sixty male Wistar rats divided into 6 groups (n=10) received ten laser irradiations, with different energy densities (groups I-0; II-0.5; III-1.0; IV-2.5; V-5.0; and VI-20 J/cm(2)). Muscles were removed and processed for transmission electron microscopic and immunohistochemical (VEGF and VEGFR-2) analyses. Captured photomicrographs of immunohistochemistry and transmission electron microscopy were evaluated. It was observed in the irradiated muscles, mitochondria of different shapes and sizes, with increased plasticity evidenced by organelles in fusion, division and the presence of elongated structures with characteristics of mitochondria, proximity with the dilated sarcoplasmatic reticulum, suggesting organelles with large amounts of energy, and the presence of cytoplasmic protrusions in the capillaries with high dosages. All studied groups showed immunostainings for both markers (VEGF and VEGFR-2), but in general those who received higher doses also showed the markings more pronounced, suggesting dose-dependent biomodulation. It was concluded that the LLLI was able to modify the ultrastructural characteristics and immunohistochemical pattern of VEGF and VEGFR-2 in the masseter muscle of rats.