Improvements on radiochemical method for the determination of Am and Cm in typical waste streams from nuclear power plants

The determination of Am and Cm in typical waste streams from nuclear power plants using anion exchange chromatography has some drawbacks like the contamination by Pu and Po. This improved procedure solves these problems, and it has been applied with success to the analysis of Am and Cm in nuclear waste samples: ion exchange resins, ion exchange resins solidified with cement and evaporator concentrates.     

Capillary electrophoretic determination of triamterene, methotrexate, and creatinine in human urine

A capillary zone electrophoresis (CZE) method using a fused-silica capillary (60.2 cm x 75 microm ID) was investigated for the determination of triamterene (TRI), methotrexate (MTX), and creatinine (CREA) in human urine. The separation was performed using a hydrodynamic injection time of 7 s (0.5 psi), a voltage of 25 kV, a capillary temperature of 30 degrees C, and 40 mM phosphoric acid adjusted to pH 2.25 by addition of triethanolamine as separation electrolyte. Under these conditions, analysis takes about 15 min. A linear response over the 0.5-15.0 mg L(-1) concentration range was found for TRI and MTX, and 0.5-80.0 mg L(-1) for CREA. Dilution of the sample (water:urine, 1:1 for TRI and MTX, and 1:25 for CREA determination) was the only step necessary prior to analysis by electrophoresis. The developed method is easy, rapid, and sensitive and has been applied to determine triamterene,methotrexate, and creatinine in urine samples with satisfactory results.     

Evaluation of hydrogen line emission and argon plasma electron concentrations resulting from the gaseous sample injection involved in hydride generation-ICP-atomic emission spectrometric analysis

The simultaneous injection of volatile hydride species and hydrogen gas, originating in reagent decomposition, was monitored during the operation of a continuous hydride generation manifold employed for the determination of trace arsenic by HG-ICP-AES. Line and background intensities as well as the FWHM of the hydrogen Hgamma and Hdelta lines were measured, and electron number densities (ne) estimated from Stark broadening of the line profiles. Results were compared with those obtained by conventional pneumatic injection of aqueous solutions. Overlapping with atomic nitrogen lines at 410 nm and 411 nm tends to distort the Hdelta line profile for the hydrogen-seeded plasma, rendering unreliable results. The N I lines seem to be quenched by the presence of water aerosol. More consistent results were obtained with the Hgamma line. When no solutions are pumped through the hydride generation manifold ("dry" plasma), the measured ne value was (1.57 +/- 0.22) x 10(15)cm(-3). Conversely, when the reducing reagent flow was replaced by pure water (corresponding to the injection of water vapor in equilibrium that is swept by the argon carrier gas passing through the phase separator), the electron concentration is 25% higher. In that case the ne value agrees between the experimental error with that obtained for a plasma in which a water aerosol is introduced at a flow rate of 1 mL/min. An enhancement of 52% relative is observed in ne when the system is operated under optimized conditions for arsine generation, employing sodium tetrahydroborate in acidic medium as reducing agent (i.e. hydrogen seeded plasma). It was also observed that the continuum emission near 410 nm for the hydrogen containing plasma correlates with the measured electron number density, suggesting that the background enhancement under hydride generation conditions may respond to the ion-electron recombination mechanism.     

Resolution of benzo[a]pyrene in complex mixtures of other polycyclic aromatic hydrocarbons. Comparison of two spectrofluorimetric methods applied to water samples

Two spectrofluorimetric methods, second-derivative constant-energy synchronous luminescence (SDCESL) and constant-wavelength synchronous luminescence (CWSL) in combination with multiple linear regression (MLR), for the quantification of benzo[a]pyrene (BaP) at sub-ng mL-1 levels, in the presence of benzo[b]fluoranthene (BbFt), benzo[k]fluoranthene (BkFt), benzo[ghi]perylene (BghiP) and indeno[1,2,3-cd]pyrene (IP), were developed and compared in detail. SDCESL presents lower limits of detection and quantification than CWSL/MLR and also gives more exact and precise results for levels close to the quantification limit. For BaP, SDCESL achieved quantification limits of 0.019 ng mL-1 in river waters and 0.007 ng mL-1 in drinking waters. This work offers a sensitive, precise, accurate, rapid, simple and economic methodology for monitoring BaP in waters for public consumption, meeting all the requirements of the EC Directive 98/83/CE that fixes the maximum admissible limit for this polycyclic aromatic hydrocarbon in drinking waters at of 0.010 ng mL-1.     

Evaluation of surface- and ground-water pollution due to herbicides in agricultural areas of Zamora and Salamanca (Spain)

The pollution of agricultural land due to herbicides was assessed in the Guare?a and Almar river basins, situated in the provinces of Zamora and Salamanca (Spain). A set of fifteen herbicides, including triazines, ureas, amides and others, was selected owing to their frequency of use, the amounts used, their toxicity and their persistence in the environment. Solid-phase extraction with polymeric cartridges, followed by HPLC with diode-array detection, were used to monitor the herbicides. This technique was chosen owing to the wide range of functionality and polarity of the analytes under study. The detection limits obtained were in the 0.004-0.025 microg/l range (lambda=220 nm). Surface and ground waters, taken from different locations in the basins, were analyzed over a 6-month period. The presence of six out of the fifteen herbicides monitored--chlortoluron, atrazine, terbutryn, alachlor, diflufenican and fluazifop-butyl--was detected in several samples at levels ranging from the detection limit to 1.2 microg/l. The relationship of these herbicides to the agricultural activities of the zone is discussed.     

Novel terpenoids from the West Indian sea whip Pseudopterogorgia elisabethae (Bayer). Elisapterosins A and B: rearranged diterpenes possessing an unprecedented cagelike framework

Four diterpenes and a nor-diterpenoid, all of which possess unusual carbocyclic skeletons, were isolated from the hexane solubles of the West Indian gorgonian Pseudopterogorgia elisabethae. The structures and relative configurations of novel metabolites elisabethin D (2), elisabethin D acetate (3), 3-epi-elisabanolide (5), elisapterosin A (6), and elisapterosin B (7) were elucidated by interpretation of overall spectral data, which included 2D NMR correlation methods, IR, UV, and accurate mass measurements (HREI-MS and HRFAB-MS), chemical reactions, and X-ray diffraction analyses. The tetracyclic carbon skeleton of the elisapterosins is undescribed and constitutes a new class of C(20) rearranged diterpenes. Elisapterosin B displays strong in vitro anti-tuberculosis activity.     

Towards the Accurate Calculation of 183W NMR Chemical Shifts in Polyoxometalates: The Relevance of the Structure

DFT calculations were carried out to study ¹⁸³W NMR chemical shifts in the family of the Keggin anions with formula α‐[XW₁₂O₄₀]^q? (X=B, Al, Si, P, Ga, Ge, As, Zn), in the β‐ and γ‐[SiW₁₂O₄₀]^4? geometric isomers, in the derivative Dawson anion [P₂W₁₈O₆₂]^6?, and in the most symmetrical Lindqvist [W₆O₁₉]^2? anion and its derivative [W₁₀O₃₂]^4?. In this article, we show that the geometry employed in the calculation of NMR chemical shifts in polyoxotungstates is extremely important if we want to be quantitative. Using very large basis sets of QZ4P quality and taking into account the conductor‐like screening model (COSMO) to account for solvent effects (aqueous and organic solutions), good geometries were found for the polyoxoanions. From these optimal geometries the ¹⁸³W NMR chemical shifts were computed with the more standard basis sets of TZP quality and including spin–orbit corrections inside the zero‐order regular approximation (ZORA) to describe the relativistic effects of the internal electrons. With this strategy the mean absolute error between experimental and theoretical values was found to be less than 10 ppm, which is similar to the experimental error. We also discuss how the geometry of the polyoxoanion influences on the shielding.     

Neutral and cationic alkylmanganese(II) complexes containing 2,6-bisiminopyridine ligands

Manganese alkyl complexes stabilised by 2,6-bis(N,N'-2,6-diisopropyl-phenyl)acetaldiminopyridine ((iPr)BIP) have been selectively prepared by reacting suitable alkylmanganese(II) precursors, such as homoleptic dialkyls [(MnR(2))(n)] or the corresponding THF adducts [{MnR(2)(thf)}(2)] with the mentioned ligand. For R=CH(2)CMe(2)Ph or CH(2)Ph, formally Mn(I) derivatives are produced, in which one of the two R groups migrates to the 4-position of the central pyridine ring in the (iPr)BIP ligand. In contrast, a true dialkyl complex [MnR(2)((iPr)BIP)] can be isolated for R=CH(2)SiMe(3). In solution, this compound slowly evolves to the corresponding Mn(I) monoalkyl derivative. A detailed study of this reaction provides insights on its mechanism, showing that it proceeds through successive alkyl migrations, followed by spontaneous dehydrogenation. Protonation of [Mn(CH(2)SiMe(3))(2)((iPr)BIP)] with the pyridinium salt [H(Py)(2)][BAr'(4)] (Ar'=3,5-C(6)H(3)(CF(3))(2)) leads to the cationic species [Mn(CH(2)SiMe(3))(Py)((iPr)BIP)](+). Alternatively, the same complex can be produced by reaction of the pyridine complex [{Mn(CH(2)SiMe(3))(2)(Py)}(2)] with the protonated ligand salt [H(iPr)BIP](+)[BAr'(4)](-). This last reaction allows the synthesis of analogous cationic alkylmanganese(II) derivatives, when precursors of type [MnR(2)((iPr)BIP)] are not available. Treatment of these neutral and cationic (iPr)BIP alkylmanganese derivatives with a range of typical co-catalysts (modified methylaluminoxane (MMAO), B(C(6)F(5))(3), trimethyl or triisobutylaluminum) does not lead to active ethylene polymerisation catalysts.