A note on sinusoidal motion of a viscoelastic non-Newtonian fluid

In this note, the exact solutions of velocity field and associated shear stress corresponding to the flow of second-grade fluid in a cylindrical pipe, subject to a sinusoidal shear stress, are determined by means of Laplace and finite Hankel transform. These solutions are written as sum of steady-state and transient solutions, and they satisfy governing equations and all imposed initial and boundary conditions. The corresponding solutions for the Newtonian fluid, performing the same motion, can be obtained from our general solutions. At the end of this note, the effects of different parameters are presented and discussed by showing flow profiles graphically.     

Structural, electronic and optical calculations of CaxZn1−xO alloys: A first principles study

First principles density functional calculations, using full potential linearized augmented plane wave (FP-LAPW) method, have been performed in order to investigate the structural, electronic and optical properties of Ca_xZn_1−xO alloy in B1 (NaCl) phase. Dependence of structural parameters as well as the band gap values on the composition x have been analyzed in the range 0?x?1. Calculated electronic structure and the density of states of these alloys are discussed in terms of the contribution of Zn d, O p and Ca p and d states. Furthermore, optical properties such as complex dielectric constants ε(ω), refractive index including extinction coefficient k(ω), normal-incidence reflectivity R(ω), absorption coefficient α(ω) and optical conductivity σ(ω) are calculated and discussed in the incident photon energy range 0-45 eV.     

Comparative efficacy of locally isolated fungal strains for Pb(II) removal and recovery from water

The present investigation aimed to study and compare the efficiency of non-viable fungal isolates to remove divalent lead (Pb(II)) from aqueous streams. The selected fungal isolates showed identity with Aspergillus caespitosus, Aureobasidium sp. RBSS-303 and Aspergillus flavus HF5 as confirmed using gene sequencing of ITS regions of the ribosomal DNA (rDNA). The obtained equilibrium data for Pb(II) biosorption of A. caespitosus fitted better to Langmuir isotherm with maximum sorption capacity of 351.0 mg/g and A. sp. RBSS-303 and A. flavus HF5 showed good fit to Freundlich isotherm with maximum sorption capacity of 271.5 and 346.3 mg/g respectively. The values of thermodynamic factors ascertained the nature of adsorption process is endothermic with A. caespitosus and A. flavus HF5 but exothermic with A. sp. RBSS-303. The experimental data for Pb(II) biosorption fits very well to pseudo second order kinetic model. With HCl the maximum 85.5, 75.3, 73.7% recovery of Pb(II) was obtained from A. caespitosus, A. sp. RBSS-303 and A. flavus HF5, respectively. The observed percentage loss in sorption capacity of Pb(II) was 3.9% by A. flavus HF5, 12.2% by A. caespitosus and 26.6% by A. sp. RBSS-303 after five cyclic studies of sorption and desorption. Results from the study confirmed the efficiency order of A. caespitosus > A. flavus HF5 > A. sp. RBSS-303 to remove and recover Pb(II) from aqueous solution. Finally, the fungal biosorbents can be used as soil conditioning agent after compositing into valuables fungal protein.     

Nanostructure Engineering of Metal–Organic Derived Frameworks: Cobalt Phosphide Embedded in Carbon Nanotubes as an Efficient ORR Catalyst

Heteroatom doping is considered an efficient strategy when tuning the electronic and structural modulation of catalysts to achieve improved performance towards renewable energy applications. Herein, we synthesized a series of carbon-based hierarchical nanostructures through the controlled pyrolysis of Co-MOF (metal organic framework) precursors followed by in situ phosphidation. Two kinds of catalysts were prepared: metal nanoparticles embedded in carbon nanotubes, and metal nanoparticles dispersed on the carbon surface. The results proved that the metal nanoparticles embedded in carbon nanotubes exhibit enhanced ORR electrocatalytic performance, owed to the enriched catalytic sites and the mass transfer facilitating channels provided by the hierarchical porous structure of the carbon nanotubes. Furthermore, the phosphidation of the metal nanoparticles embedded in carbon nanotubes (P-Co-CNTs) increases the surface area and porosity, resulting in faster electron transfer, greater conductivity, and lower charge transfer resistance towards ORR pathways. The P-Co-CNT catalyst shows a half-wave potential of 0.887 V, a Tafel slope of 67 mV dec⁻¹, and robust stability, which are comparatively better than the precious metal catalyst (Pt/C). Conclusively, this study delivers a novel path for designing multiple crystal phases with improved catalytic performance for energy devices.     

Synthesis of spin-labelled poly(acrylic acid)s and their segmental motion study

Understanding the segmental dynamics of polymer chains is cardinal to decipher the microscopic behaviour in order to modulate the bulk properties of polymers. The study of electron spin resonance (ESR) spectroscopy of spin-labelled polymers is useful to understand the segmental dynamics of polymer chains in solution. In this paper, poly(acrylic acid)s (PAAs) were spin labelled with 4-amino-2,2,6,6-tetramethylpiperidine-1-oxyl radicals. Spin-labelled PAAs (SL-PAAs) were characterised by Fourier-transform infrared spectroscopy, ultraviolet–visible spectroscopy, thermogravimetric analysis, differential scanning calorimetry, cyclic voltammetry (CV), and ESR analyses. The polyelectrolyte complexes of SL-PAAs were prepared by employing poly(diallyldimethylammonium chloride) (PDADMAC) as the polycation and analysed by transmission electron microscopy, dynamic light scattering (DLS), and ESR spectroscopies. The effect of molar mass on the segmental dynamics of SL-PAAs in pristine as well as in the form of polyelectrolyte complexes (PECs) was studied. The results indicated that SL-PAAs show a differential complexation behaviour with PDADMAC in the PECs depending on their molar mass.     

Elicitation of Submerged Adventitious Root Cultures of Stevia rebaudiana with Cuscuta reflexa for Production of Biomass and Secondary Metabolites

Stevia rebaudiana is an important medicinal plant that belongs to the Asteraceae family. The leaves of Stevia rebaudiana are a rich source of many health-promoting agents such as polyphenols, flavonoids, and steviol glycoside, which play a key role in controlling obesity and diabetes. New strategies such as the elicitation of culture media are needed to enhance the productivity of active components. Herein, the Cuscuta reflexa extracts were exploited as elicitors to enhance the productivity of active components. Cuscuta reflexa is one of the parasitic plants that has the ability to elongate very fast and cover the host plant. Consequently, it may be possible that the addition of Cuscuta reflexa extracts to adventitious root cultures (ADR) of Stevia rebaudiana may elongate the root more than control cultures to produce higher quantities of the desired secondary metabolites. Therefore, the main objective of the current study was to investigate the effect of Cuscuta reflexa extract as a biotic elicitor on the biomass accumulation and production of antioxidant secondary metabolite in submerged adventitious root cultures of Stevia rebaudiana. Ten different concentrations of Cuscuta reflexa were added to liquid media containing 0.5 mg/L naphthalene acetic acid (NAA). The growth kinetics of adventitious roots was investigated for a period of 49 days with an interval of 7 days. The maximum biomass accumulation (7.83 g/3 flasks) was observed on medium containing 10 mg/L extract of Cuscuta reflexa on day 49. As the concentration of extract increases in the culture media, the biomass gradually decreases after 49 days of inoculation. In this study, the higher total phenolics content (0.31 mg GAE/g-DW), total flavonoids content (0.22 mg QE/g-DW), and antioxidant activity (85.54%) were observed in 100 mg/L treated cultures. The higher concentration (100 mg/L) of Cuscuta reflexa extract considerably increased the total phenolics content (TPC), total phenolics production (TPP), total flavonoids content (TFC), total flavonoids production (TFP), total polyphenolics content (TPPC), and total polyphenolics production (TPPP). It was concluded that the extract of Cuscuta reflexa moderately improved biomass accumulation but enhanced the synthesis of phenolics, flavonoids, and antioxidant activities. Here, biomass’s independent production of secondary metabolites was observed with the addition of extract. The present study will be helpful to scale up adventitious roots culture into a bioreactor for the production of secondary metabolites rather than biomass accumulation in medicinally important Stevia rebaudiana.     

Synthesis of Ferrocene-based Esters as Burning Rate Catalysts and their Anti-migration Study

Ferrocene-based (Fc-based) burning rate catalysts (BRCs) play an essential role in the solid rocket propellants. However, the migration problem during curing and storage limits their applications. To retard the migration problems of Fc-based BRCs and to increase the burning rate (BR) of AP-based propellants, Fc-based esters compounds (Es-Fcs) were synthesized. The synthesized Es-Fcs were characterized by X-ray diffraction, proton nuclear magnetic resonance (¹H NMR),¹³C NMR and Fourier transform infrared (FT-IR) spectroscopy. The electrochemical behaviors of Es-Fcs were investigated by cyclic voltammetry (CV). The BR catalytic activity of Es-Fcs on thermal decomposition of AP were examined by thermogravimetry (TG). Thermal analysis results showed that these Es-Fcs had good BR catalytic effects on thermal decomposition of AP. It was found that the anti-migration performance of Es-Fcs were better than catocene and Fc.     

Effect of particle size and alloying with different metals on 57Fe Mössbauer spectra

Iron nanoparticles of various sizes have been synthesized using the chemical route which involves the preparation of iron bipyridine complexes in presence of different capping agents followed by thermal decomposition at 450°C in inert atmosphere. The bimetallic nanoalloys of Fe with Mg and Pd have also been prepared by following the same route. The resulting nanoparticles have been characterized by EDX-RF, XRD, AFM and ⁵⁷Fe Mössbauer spectroscopy. The appearance of quadrupole doublets in the Mössbauer spectra of Fe nanoparticles indicates the absence of magnetic interaction and variation in parameters is due to the varying particle size. The Mössbauer spectrum of Fe–Mg₂ bimetallic nanoalloy shows two doublets indicating the presence of superparamagnetism. The two doublets can be attributed to change in s-electron density of iron resulting from its two neighboring magnesium atoms. Fe–Pd nanoalloy Mössbauer spectrum is characterized by having a superparamagnetic doublet and a ferromagnetic sextet.