Monolayer-based selective optical recognition and quantification of FeCl3 via electron transfer

Reagentless optical recognition and parts-per-million (ppm) quantification of FeCl3 in CH3CN was demonstrated using a redox-active Os(II)-chromophore-based monolayer on glass. The Fe3+-induced oxidation of the monolayer is fully reversible and can be monitored optically with a conventional UV/vis spectrophotometer (260-800 nm). The system can be reset with water within <1 min. Selectivity of the sensor toward FeCl3 is not affected by the presence of representative alkali metals, alkaline earth metals, and other transition-metal salts. Sensing of Fe3+ and concurrent generation of Fe2+ can be also observed with the naked eye by adding 2,2'-bipyridyl (bipy) to the solution to generate [Fe(bipy)3]2+. Validation of the analytical performance characteristics of the sensor was performed including reversibility, reproducibility, stability, and the detection range (0.5-162 ppm of FeCl3 in CH3CN, 100-1000 ppm in water). The monolayer is sensitive and specifically responsive to its target ion. In addition, a blind test was conducted to probe the reproducibility and reproducibility variances of the system. The reaction of the monolayer with a CH3CN solution containing 5 ppm of FeCl3 follows pseudo first-order kinetics in the monolayer with DeltaG298K = 21.6 +/- 0.1 kcal/mol, DeltaH = 10.2 +/- 1.5 kcal/mol, DeltaS = -38.3 +/- 4.9 eu.     

Development of membrane electrodes for selective determination of some antiepileptic drugs in pharmaceuticals,plasma and urine

Newly developed, simple, low-cost and sensitive ion-selective electrodes have been proposed for determination of some antiepileptic drugs such as lamotrigine, felbamate, and primidone in their pharmaceutical preparations as well as in biological fluids. The electrodes are based on poly(vinyl chloride) membranes doped with drug–tetraphenyl borate (TPB) or drug–phosphotungstic acid (PT) ion-pair complexes as molecular recognition materials. The novel electrodes displayed rapid Nernstian responses with detection limits of approximately 10⁻⁷ M. Calibration graphs were linear over the ranges 5.2 × 10⁻⁷–1.0 × 10⁻³, 1.5 × 10⁻⁶–1.0 × 10⁻³, and 2.6 × 10⁻⁷–1.0 × 10⁻³ M for drug–TPB and 5.8 × 10⁻⁷–1.0 × 10⁻³, 1.8 × 10⁻⁷–1.0 × 10⁻³, and 6.6 × 10⁻⁷–1.0 × 10⁻³ M for drug–PT electrodes, respectively, with slopes ranging from 52.3 to 62.3 mV/decade. The membranes developed have potential stability for up to 1 month and proved to be highly selective for the drugs investigated over other ions and excipients. The results show that the selectivity of the ion-selective electrodes is influenced significantly by the plasticizer. The proposed electrodes were successfully applied in the determination of these drugs in pharmaceutical preparations in four batches of different expiry dates. Statistical Student’s t test and F test showed insignificant systematic error between the ion-selective electrode methods developed and a standard method. Comparison of the results obtained using the proposed electrodes with those found using a reference method showed that the ion-selective electrode technique is sensitive, reliable, and can be used with very good accuracy and high percentage recovery without pretreatment procedures of the samples to minimize interfering matrix effects. Figure Structure of lamotrigine, felbanate and primidone     

Necessary Conditions in Multiobjective Optimization with Equilibrium Constraints

We study multiobjective optimization problems with equilibrium constraints (MOPECs) described by parametric generalized equations in the form

2,4,5-trinitroimidazole-based energetic salts

2,4,5-Trinitroimidazolate (TNI) salts with "high-nitrogen" cations tend to be highly hydrogen bonded and have heats of formation ranging up to 616 kJ mol(-1). Density, oxygen balance, and thermostability are enhanced by the presence of TNI. Based on theoretical calculations, all of the new salts are potential propellants.     

Fullerene-C60-modified electrode as a sensitive voltammetric sensor for detection of nandrolone--an anabolic steroid used in doping

The electrochemical behaviour of nandrolone is investigated by cyclic, differential pulse and square-wave voltammetry in phosphate buffer system at fullerene-C₆₀-modified electrode. The modified electrode shows an excellent electrocatalytic activity towards the oxidation of nandrolone resulting in a marked lowering in the peak potential and considerable improvement of the peak current as compared to the electrochemical activity at the bare glassy carbon electrode. The oxidation process is shown to be irreversible and diffusion-controlled. A linear range of 50 μM to 0.1 nM is obtained along with a detection limit and sensitivity of 0.42 nM and 0.358 nA nM⁻¹, respectively, in square-wave voltammetric technique. A diffusion coefficient of 4.13 × 10⁻⁸ cm² s⁻¹ was found for nandrolone using chronoamperometry. The effect of interferents, stability and reproducibility of the proposed method were also studied. The described method was successfully employed for the determination of nandrolone in human serum and urine samples. A cross-validation of observed results by GC-MS indicates that the results are in good agreement with each other.     

Steroidal alkaloids from Holarrhena antidysenterica (L.) WALL

Chemical investigations on the stem bark of Holarrhena antidysenterica resulted in the isolation of a new steroidal alkaloid designated as holadysenterine (1), together with three known steroidal alkaloids, conessine (2), isoconessimine (3) and kurchessine (4). Their structures were elucidated on the basis of 1D- and 2D-NMR techniques and high-resolution mass spectrometry.     

Application of Doehlert design in optimizing the determination of degraded products of nerve agents by ion-pair liquid chromatography electrospray ionization tandem mass spectrometry

A qualitative method was developed for the determination of degraded products of nerve agents by using ion-pair liquid chromatography electrospray ionization tandem mass spectrometry (IP-LC-ESI-MS(n)). Generally, alkylphosphonic acids (APAs) and O-alkyl alkylphosphonic acids (AAPAs) give deprotonated molecular ion [M-H](-) in negative mode. Interestingly, first time we obtained the molecular radical anion [M](.-) of phosphonic acids in negative mode by using tri-n-butyl amine as an ion-pairing agent. We interpreted this observation as an indication of electrochemical reduction of phosphonic acids in electrospray needle. Three variables such as sheath gas flow, electrospray needle voltage and pH of the mobile phase were investigated to enhance the molecular radical anion [M](.-) signal of each analyte. The Doehlert design was used to obtain the region in which the optimum value of such variables is simultaneously achieved. Limit of detection achieved was 0.5 microg mL(-1) for AAPAs and 10 microg mL(-1) for APAs. Excellent precision was observed with less than 8.61% RSD. Finally, the method was applied for the detection of ethyl methylphosphonic in aqueous extract of soil sample.     

Growth of highly oriented crystalline polyaniline films by self-organization

Silicon substrates with (100) orientation were modified with amino-silane self-assembled monolayer (SAM) to provide amino (NH(2)) moieties at the substrate surface. Self-organization of polyaniline during chemical polymerization, on this modified surface, leads to the growth of highly oriented films at the substrate-polymer interface. The morphology studied using scanning electron microscopy and atomic force microscopy revealed the formation of polymer film with well faceted pyramidal crystallites. XPS and FTIR spectroscopy were used to analyze the chemical structure of the film. X-ray diffraction measurements show the crystalline nature of the polyaniline, whose lattice parameters are in agreement with the reported values. This study underlines the importance of a SAM in deciding the structure and morphology of the deposited polymer.     

In situ derivatization hollow fiber mediated liquid phase microextraction of alkylphosphonic acids from water

Alkylphosphonic acids (APAs), particularly the methyl-, ethyl-, isopropyl- and n-propyl-phosphonic acids are important markers of extremely toxic nerve agents. Hence, their detection and identification is of vital importance to verification of chemical weapons convention (CWC). Verification analysis of CWC requires development of fast, reliable, simple and reproducible sample preparation methods of water and soil samples. Present investigation is focused on the optimization of alkylation of APAs in water with subsequent extraction of alkylated acids by hollow fiber liquid phase microextraction (HF-LPME). This simple and sensitive sample preparation of APAs from water offered better recoveries in comparison to conventionally used extraction technique. Under optimized conditions, the APAs were detected at the concentration of 0.5-0.75 microg/mL with S/N ratio > or = 5, whereas the LODs for alkyl APAs (monobasic APAs) were achieved up to 0.1 microg/mL. The developed method was finally tested with water samples supplied in 19th official proficiency test conducted by the OPCW.     

Thermocapillary convection in double-layer fluid structures within a two-dimensional open cavity

Thermocapillary convection within a differentially-heated open rectangular cavity containing two immiscible liquid layers is considered in the absence of gravitational effects. The temperature and flow fields in the two layers are computed using domain mapping in conjunction with a finite-difference scheme on a staggered grid. The melt-encapsulant and air-encapsulant interfaces are allowed to deform, with the contact lines pinned on the solid boundaries. The presence of a free surface at the top leads to increased convection in the encapsulant phase while retarding thermocapillary flow in the melt. The intensity of thermocapillary convection in the encapsulated layer is reduced as the viscosity of the encapsulant is increased or the thickness of the encapsulant layer is decreased. Choosing an encapsulant with a greater sensitivity of interfacial tension to temperature (as compared to that of the melt phase) can almost completely suppress thermocapillary convection in the melt. Deformations of the melt-encapsulant interface in an open cavity are found to be larger than those in a closed cavity with a rigid top surface, due to higher pressure gradients realized in the encapsulant phase. In contrast to interface deformation behavior reported earlier for a double-layer system in a closed cavity, the shape of the melt-encapsulant interface is qualitatively similar for all values of the viscosity ratio, with the interface dipping into the melt near the cold wall, and into the encapsulant near the hot wall. For the double-layers considered in this study, a free surface at the top of the encapsulant layer was found to be more effective than a rigid top in reducing the intensity of thermocapillary convection in the melt.