Potassium phthalimide： An efficient and green organocatalyst for the synthesis of 4-aryl-7-（arylmethylene）-3,4,6,7-tetrahydro-1H- cyclopenta[d]pyrimidin-2（5H）-ones]thiones under solvent-free conditions

An efficient synthesis of Biginelli-type compounds using potassium phthalimide as a green, mild, and commercially available organocatalyst in a one-pot, multi-component cyclocondensation reaction of cyclopentanone, aldehydes, and urea/thiourea is reported. The present methodology is a green approach to access 4-aryl-7-（aryImethylene）-3,4,6,7-tetrahydro-1H-cyclopenta[d]pyrimidin-2（5H）-ones/thiones. It offers several merits such as simple operational procedures, no use of hazardous organic solvents, and cheap and environmentally friendly solid basic catalyst.     

Development of a size exclusion chromatography-electrochemical detection method for the analysis of total organic and inorganic chloramines

A size exclusion chromatography (SEC) followed by post-column reaction with iodide and electrochemical detection method is developed for analysis of total organic and inorganic chloramines. Ammonium chloride and a group of test compounds (Glycine, Tyrosine, DL-Alanyl-DL-Alanine, Arg-Gly-Asp-Ser, Bradykinin, Aprotinin, and alpha-Lactalbumin) are selected and chlorinated to represent inorganic chloramines and different sizes of organic N-chloramines. An analytical SEC column with pore size of 60A is used and chromatographic conditions including the working electrode potential and flow rate are optimized to gain optimum resolution and sensitivity. The detection limits are estimated to be 0.12 mg/L and 0.05 mg/L, respectively, for tested inorganic and organic chloramines.     

Copper-based metal–organic framework decorated by CuO hair-like nanostructures: Electrocatalyst for oxygen evolution reaction

We report a Cu-based metal–organic framework (MOF) decorated by CuO nanostructures as an efficient catalyst for the oxygen evolution reaction (OER). MIL-53(Cu) was synthesized by a hydrothermal approach using 1,4-bezenedicarboxylic acid as organic precursor and further annealed at 300°C to form CuO nanostructures on its surface. The produced electrocatalyst, CuO@MIL-53(Cu), was characterized using various techniques. Under alkaline conditions, the developed electrocatalyst exhibited an overpotential of 801 and 336 mV versus RHE at 10 and 1 mA cm⁻², respectively. The reproducibility of the catalytic performance was validated using several electrodes. It was confirmed that the CuO hair-like nanostructures grown on MIL-53(Cu) using thermal treatment exhibit high OER activity, good kinetics and durability. CuO@MIL-53(Cu) is an economic noble-metal-free OER electrocatalyst. It has potential for application as anode material for sustainable energy technologies like batteries, fuel cells and water electrolysis.     

Discrete Hf18 Metal-oxo Cluster as a Heterogeneous Nanozyme for Site-Specific Proteolysis

The selective hydrolysis of proteins by non-enzymatic catalysis is difficult to achieve, yet it is crucial for applications in biotechnology and proteomics. Herein, we report that discrete hafnium metal-oxo cluster [Hf₁₈O₁₀(OH)₂₆(SO₄)₁₃⋅(H₂O)₃₃] ( Hf₁₈ ), which is centred by the same hexamer motif found in many MOFs, acts as a heterogeneous catalyst for the efficient hydrolysis of horse heart myoglobin (HHM) in low buffer concentrations. Among 154 amino acids present in the sequence of HHM, strictly selective cleavage at only 6 solvent accessible aspartate residues was observed. Mechanistic experiments suggest that the hydrolytic activity is likely derived from the actuation of Hf^IV Lewis acidic sites and the Brønsted acidic surface of Hf₁₈ . X-ray scattering and ESI-MS revealed that Hf₁₈ is completely insoluble in these conditions, confirming the HHM hydrolysis is caused by a heterogeneous reaction of the solid Hf₁₈ cluster, and not from smaller, soluble Hf species that could leach into solution.     

Determination of captopril in patient human urine using ferrocenemonocarboxylic acid modified carbon nanotubes paste electrode

<正>In this work,we describe a new strategy for the electrochemical determination of captopril(CA) using ferrocenemonocarboxylic acid as a mediator and multiwall carbon nanotubes as sensors in aqueous solution at pH 7.0.The diffusion coefficient(D),and the kinetic parameters such as electron transfer coefficient(α).and heterogeneous rate constant(k_h),for CA were also determined using electrochemical approaches.Under the optimized conditions,the electrocatalytic oxidation peak current of captopril showed two linear dynamic ranges with a detection limit of 0.3×10~(-6) mol L~(-1) captopril.The linear calibration range was 0.8×10~(-6) to 65×10~(-6) mol L~(-1) using cyclic voltammetry.Finally,this modified electrode was also examined as a selective,simple and precise new electrochemical sensor for the determination of captopril in real samples such as drug and patient human urine.     

Dielectric Constants of Water,Methanol, Ethanol,Butanol and Acetone: Measurement and Computational Study

The dielectric constants (relative permittivities) of water, methanol, ethanol, butanol and acetone were measured at 91.3 kPa and (283.15 and 293.15) K and are reported here. The dielectric constants were determined by using a new setup based on a low-pass filter. The obtained dielectric constant values are compared with those reported in the literature, and are consistent with those reported in the literature. The obtained dielectric constant data were also compared with those calculated by the Kirkwood model. The comparisons indicated that Kirkwood model can be successfully used for calculation of dielectric constants of the pure fluids.     

Raman active jagged-shaped gold-coated magnetic particles as a novel multimodal nanoprobe

The creation of novel engineered multimodal nanoparticles (NPs) is a key focus in bionanotechnology and can lead to deep understanding of biological processes at the molecular level. Here, we present a multi-component system made of gold-coupled core-shell SPIONs, as a new nanoprobe with signal enhancement in surface Raman spectroscopy, due to its jagged-shaped gold shell coating.     

Allylpalladium dimers with metals connected by binucleating dithiooxamidates in two different coordination modes: solution behavior and solid-state structure

A series of allylpalladium dimers having metals connected by binucleating dialkyldithiooxamidate [N(R)SC-CS(R)N](2-) [R = methyl, ethyl, isopropyl, benzyl, isoamyl, (S)-1-(1-phenyl)ethyl, meso-(1-phenyl)ethyl, and rac-(1-phenyl)ethyl] were prepared by reacting the monochelate [(η(3)-allyl)Pd(N(R)SC-CS(R)NH κ-S,S Pd)] with [(η(3)-allyl)PdCl](2) in chloroform. At low temperature (20 °C), the bimetallic complexes [(η(3)-allyl)Pd](2)(μ-dialkyldithiooxamidate κ-N,N' Pd, κ-S,S' Pd') (kinetic compounds) are formed in a short reaction time (10 min). At a higher temperature (50 °C) and a longer reaction time (24 h), the corresponding bimetallic isomers [(η(3)-allyl)Pd](2)(μ-dialkyldithiooxamidate κ-N,S Pd, κ-N',S' Pd') (thermodynamic compounds) are obtained. Both kinetic and thermodynamic compounds can exist as endo or exo isomers, depending on the reciprocal orientation of the allyl cuspids. Both endo and exo isomers are only detectable in solution when the alkyl substituents are chiral alkyl groups. Moreover, diffractometric modeling agrees with the presence of both isomers in the solid state even when the alkyl substituent is an achiral alkyl group. In a chloroform solution, endo and exo isomers undergo isomeric conversion owing to the apparent allyl rotation that follows the Pd-N bond rupture in the (η(3)-allyl)Pd(N^N) frame of kinetic compounds or in the (η(3)-allyl)Pd(N^S) frame of thermodynamic compounds. The dithiooxamidate [N(R)SC-CS(R)N](2-), when engaged in a κ-N,S Pd, κ-N',S' Pd' coordination mode, behaves as a hybrid hemilabile binucleating ligand. At room temperature and in a chloroform solution, the kinetic compounds rearrange into the thermodynamically more stable isomers in about 3 or 4 days. The higher stability of the thermodynamic species was evaluated by means of computational studies in accordance with the maximum hardness principle. Finally, the crystal structures of [(η(3)-allyl)Pd](2)(μ-diethyldithiooxamidate κ-N,S Pd, κ-N',S' Pd'), [(η(3)-allyl)Pd](2)(μ-meso-(1-phenyl)ethyldithiooxamidate κ-N,S Pd, κ-N',S' Pd'), and [(η(3)-allyl)Pd](2)(μ-rac-(1-phenyl)ethyldithiooxamidate κ-N,N' Pd, κ-S,S' Pd') are reported.     

Influence of Chemical Heterogeneity and Nanoscale Roughness on the DLVO Energy Interaction by Spherical Coordinates

In this work, the influence of chemical heterogeneity on the stability of nanocolloidal systems is surveyed with a new method. Zone of influence as a very important parameter for chemical patch surveying is modeled for sphere and flat surface. Surface chemical heterogeneity with specified properties, size, and position are created by spherical coordinate integration method. Rippled sphere model is used to create roughness and the flat surface is created by changing two sphere radius ratio. Using the spherical coordinate system for modeling of surface roughness and chemical heterogeneity is very accurate and fast. Results show that the patches could destabilize the colloidal system at very small sizes. Surface roughness reduces the effect of chemical patches for destabilizing the colloidal system, and with increasing the size of roughness the total DLVO energy interaction increases.