Flow modulation comprehensive two-dimensional gas chromatography-mass spectrometry with a supersonic molecular beam

A new approach of flow modulation comprehensive two-dimensional gas chromatography-mass spectrometry (GC x GC-MS) with supersonic molecular beam (SMB) and a quadrupole mass analyzer is presented. Flow modulation uniquely enables GC x GC-MS to be achieved even with the limited scan speed of quadrupole MS, and its 20 ml/min column flow rate is handled, splitless, by the SMB interface. Flow modulation GC x GC-SMB-MS shares all the major benefits of GC x GC and combines them with GC-MS including: (a) increased GC separation capability; (b) improved sensitivity via narrower GC peaks; (c) improved sensitivity through reduced matrix interference and chemical noise; (d) polarity and functional group sample information via the order of elution from the second polar column. In addition, GC x GC-SMB-MS is uniquely characterized by the features of GC-MS with SMB of enhanced and trustworthy molecular ion plus isotope abundance analysis (IAA) for improved sample identification and fast fly-through ion source response time. The combination of flow modulation GC x GC with GC-MS with SMB (supersonic GC-MS) was explored with complex matrices such as diesel fuel analysis and pesticide analysis in agricultural products.     

SnifProbe: new method and device for vapor and gas sampling

SnifProbe is based on the use of 15 mm short pieces of standard 0.53 mm I.D. capillary or porous layer open tubular columns for sampling airborne, headspace, aroma or air pollution samples. A miniaturized frit-bottomed packed vial named MicroSPE was also prepared which served for the sampling of solvent vapors and gases as well as liquid water. The short (15 mm) trapping column is inserted into the SnifProbe easy-insertion-port and the SnifProbe is located or aimed at the sample environment. A miniature pump is operated for pumping 10-60 ml/min of the air sample through the short piece of column to collect the sample. After a few seconds up to a few minutes of pumping, the short column is removed from the SnifProbe with tweezers (or gloved hands) and placed inside a glass vial of a direct sample introduction device (ChromatoProbe) having a 0.5 mm hole at its bottom. The ChromatoProbe sample holder with its glass vial and sample in the short column are introduced into the GC injector as usual. The sample is then quickly and efficiently desorbed from the short sample column and is transferred into the analytical column for conventional GC and/or GC-MS analysis. We have explored the various characteristics of SnifProbe and demonstrated its applicability and effectiveness in many applications. These applications include: the analysis of benzene, toluene and o-xylene in air, SO2 in air, perfume aroma on hand, beer headspace, wine aroma, coffee aroma, cigarette smoke, trace chemical warfare agent simulants, explosives vapors, ethanol in human breath and odorants in domestic cooking gas. SnifProbe can be operated in the field or at a chemical process. The sample columns can be plugged and stored in a small union storage device, placed in a small plastic bag, marked and brought to the laboratory for analysis with the full power of GC and/or GC-MS. Accordingly, we feel that the major and most significant feature of SnifProbe is that it brings the field and process to the laboratory. Thus, SnifProbe can extend the "arm" of the GC and GC-MS laboratory and enable high-quality field and process analysis.     

Fast,very fast,and ultra-fast gas chromatography-mass spectrometry of thermally labile steroids,carbamates, and drugs in supersonic molecular beams

Gas chromatography-mass spectrometry (GC-MS) analyses of thermally labile compounds have been studied by using a short column fast gas chromatograph, coupled with fly-through electron ionization in supersonic molecular beams. Thirty-two compounds, which include steroids, carbamate pesticides, antibiotic drugs, and other pharmaceutical compounds, have been analyzed and the details of their GC-MS analysis are provided. The ability to analyze thermally labile compounds is discussed in relation to the speed of analysis. A new term, “speed enhancement factor” (SEF), is defined as the product of column length reduction and the carrier gas linear velocity increase, as compared with normal GC-MS conditions. Fast, very fast, and ultra-fast GC-MS are defined with a SEF in the ranges of 5–30, 30–400, and 400–4000, respectively. Trade-offs in the degree of dissociation, speed, gas chromatograph resolution, and sensitivity were studied and examined with thermally labile molecules. The experimental factors that affect the dissociation are described with emphasis on its reduction. We claim that the use of supersonic molecular beams for sampling and ionization provides the ultimate capability in the GC-MS of thermally labile compounds. The obtained 70-eV electron ionization mass spectra are shown, and an enhanced relative abundance of the molecular ion is demonstrated together with library search capability of these mass spectra, which is better than that reported with particle beam liquid chromatography-mass spectrometry. The performance of fast GC-MS in supersonic molecular beams is compared with other methods of fast GC-MS and with particle beam liquid chromatography-mass spectrometry.     

A Comparison of SnifProbe and SPME for Aroma Sampling

The popular solid phase micro extraction (SPME) device and method is compared with SnifProbe (Gordin and Amirav in J Chromatogr A 903:155–172, 2000) in their application for coffee aroma sampling for its analysis. The main difference between SPME and SnifProbe is in the relative motion of the sampled air. While SPME is based on static air sampling and the achievement of equilibrium, SnifProbe is based on active air pumping through the adsorption trap. A second important difference concerns the sample introduction into the GC injector for its intra injector thermal desorption. SPME is based on the use of a special syringe for sample introduction without any change to the injector, while SnifProbe requires a ChromatoProbe for sample introduction. We found that as a result of these differences, while SnifProbe provides a more faithful (representative) headspace and aroma sample collection, SPME is characterized by major compound dependent sample bias. In addition, SnifProbe enabled much faster sample collection than SPME. Since SnifProbe uses the ChromatoProbe for sample introduction into the GC, bigger sample collection/trapping devices such as silicone tubing can be used, and as a result, over ten times superior SnifProbe sensitivity (versus SPME) was demonstrated. Additional SnifProbe and SPME features are compared and discussed.