Reference Electrode for Ionic Liquids

Reference electrodes for room temperature ionic liquid (RTIL) applications were constructed that have a known and reproducible potential versus the ferrocene/ferrocenium couple. They are based on reference electrodes of the first kind, Ag/Ag⁺ couple type, or of the second kind, based on Ag/AgCl in M⁺Cl^?. The former uses AgNO₃ salt and the latter tetrabutylammonium chloride, Bu₄NCl, dissolved in acetonitrile which are then introduced to the ionic liquid of choice for a final concentration of 0.1 M. The reference electrodes can be easily and reproducibly constructed. An ionic contact of these reference systems with the test electrolyte was made using an asbestos fiber liquid junction. The internal compartment of the reference system was filled with the same ionic liquid as used for the electrochemical experiment. The performance of these reference electrodes was tested in selected ionic liquids using the ferrocene/ferrocenium redox couple. The stability, reproducibility, and temperature behavior of the two reference systems have been characterized in the following ionic liquids: 1‐butyl‐3‐methylimidazolium tetrafluoroborate (BMIBF₄), 1‐butyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide (BMI(CF₃SO₂)₂N), and 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BMIPF₆). It has been found that the formal potentials of the examined reference systems are stable over several days. There is a linear relationship for the temperature studied in the range from 25 to 60 °C.     

The lowest singlet-triplet excitation energy of BN: A converged coupled cluster perspective

The notoriously small X 3Pi-a 1Sigma+ excitation energy of the BN diatomic has been calculated using high-order coupled cluster methods. Convergence has been established in both the one-particle basis set and the coupled cluster expansion. Explicit inclusion of connected quadruple excitations T4 is required for even semiquantitative agreement with the limit value, while connected quintuple excitations T5 still have an effect of about 60 cm(-1). Still higher excitations only account for about 10 cm(-1). Inclusion of inner-shell correlation further reduces Te by about 60 cm(-1) at the CCSDT, and 85 cm(-1) at the CCSDTQ level. Our best estimate, Te = 183+/-40 cm(-1), is in excellent agreement with earlier calculations and experiment, albeit with a smaller (and conservative) uncertainty. The dissociation energy of BN(X 3Pi) is De = 105.74+/-0.16 kcal/mol and D0 = 103.57+/-0.16 kcal/mol.     

Selective sp3 C-H activation of ketones at the beta position by Ir(I). Origin of regioselectivity and water effect

The reaction of the cationic (PNP)Ir(I)(cyclooctene) complex (1) (PNP = 2,6-bis-(di-tert-butylphosphinomethyl)pyridine) with 2-butanone or 3-pentanone results in the selective, quantitative activation of a beta C-H bond, yielding O,C-chelated complexes. Calculations show that the selectivity is both kinetically (because of steric reasons in the rate determingin step (RDS)) and thermodynamically controlled, the latter as a result of carbonyl oxygen coordination in the product. The RDS is formation of the eta2-C,H intermediates from the complexed ketone intermediates. Water has a strong influence on the regioselectivity, and in its presence, reaction of 1 with 2-butanone gives also the alpha terminal C-H activation product. Computational studies suggest that water can stabilize the terminal alpha C-H activation product by hydrogen bonding, forming a six-membered ring with the ketone, as experimentally observed in the X-ray structure of the acetonyl hydride aqua complex.     

Structural and electronic differences of copper(I) complexes with tris(pyrazolyl)methane and hydrotris(pyrazolyl)borate ligands

Copper(I) complexes with tripodal nitrogen-containing neutral ligands such as tris(3,5-diisopropyl-1-pyrazolyl)methane (L1') and tris(3-tertiary-butyl-5-isopropyl-1-pyrazolyl)methane (L3'), and with corresponding anionic ligands such as hydrotris(3,5-diisopropyl-1-pyrazolyl)borate (L1-) and hydrotris(3-tertiary-butyl-5-isopropyl-1-pyrazolyl)borate (L3-) were synthesized and structurally characterized. Copper(I) complexes [Cu(L1')Cl] (1), [Cu(L1')(OClO3)] (2), [Cu(L1')(NCMe)](PF6) (3a), [Cu(L1')(NCMe)](ClO4) (3b), [Cu(L1')(CO)](PF6) (4a), and [Cu(L1')(CO)](ClO4) (4b) were prepared using the ligand L1'. Copper(I) complexes [Cu(L3')Cl] (5) and [Cu(L3')(NCMe)](PF6) (6) with the ligand L3' were also synthesized. Copper(I) complexes [Cu(L1)(NCMe)] (7) and [Cu(L1)(CO)] (8) were prepared using the anionic ligand L1-. Finally, copper(I) complexes with anionic ligand L3- and acetonitrile (9) and carbon monoxide (10) were synthesized. The complexes obtained were fully characterized by IR, far-IR, 1H NMR, and 13C NMR spectroscopy. The structures of both ligands, L1' and L3', and of complexes 1, 2, 3a, 3b, 4a, 4b, 5, 6, 7, and 10 were determined by X-ray crystallography. The effects of the differences in (a) the fourth ligand and the counteranion, (b) the steric hindrance at the third position of the pyrazolyl rings, and most importantly, (c) the charge of the N3 type ligands, on the structures, spectroscopic properties, and reactivities of the copper(I) complexes are discussed. The observed differences in the reactivities toward O2 of the copper(I) acetonitrile complexes are traced back to differences in the oxidation potentials determined by cyclic voltammetry. A special focus is set on the carbonyl complexes, where the 13C NMR and vibrational data are presented. Density functional theory (DFT) calculations are used to shed light on the differences in CO bonding in the compounds with neutral and anionic N3 ligands. In correlation with the vibrational and electrochemical data of these complexes, it is demonstrated that the C-O stretching vibration is a sensitive probe for the "electron richness" of copper(I) in these compounds.     

High-throughput screening of enzyme libraries: thiolactonases evolved by fluorescence-activated sorting of single cells in emulsion compartments

Single bacterial cells, each expressing a different library variant, were compartmentalized in aqueous droplets of water-in-oil (w/o) emulsions, thus maintaining a linkage between a plasmid-borne gene, the encoded enzyme variant, and the fluorescent product this enzyme may generate. Conversion into a double, water-in-oil-in-water (w/o/w) emulsion enabled the sorting of these compartments by FACS, as well as the isolation of living bacteria cells and their enzyme-coding genes. We demonstrate the directed evolution of new enzyme variants by screening >10(7) serum paraoxonase (PON1) mutants, to yield 100-fold improvements in thiolactonase activity. In vitro compartmentalization (IVC) of single cells, each carrying >10(4) enzyme molecules, in a volume of <10 femtoliter (fl), enabled detection and selection despite the fast, spontaneous hydrolysis of the substrate, the very low initial thiolactonase activity of PON1, and the use of difusable fluorescent products.     

Hirshfeld surface analysis of two new phosphorothioic triamide structures

Hirshfeld surfaces and two‐dimensional fingerprint plots are used to analyse the intermolecular interactions in two new phosphorothioic triamide structures, namely N,N′,N′′‐tris(3,4‐dimethylphenyl)phosphorothioic triamide acetonitrile hemisolvate, P(S)[NHC₆H₃‐3,4‐(CH₃)₂]₃·0.5CH₃CN or C₂₄H₃₀N₃PS·0.5CH₃CN, (I), and N,N′,N′′‐tris(4‐methylphenyl)phosphorothioic triamide–3‐methylpiperidinium chloride (1/1), P(S)[NHC₆H₄(4‐CH₃)]₃·[3‐CH₃‐C₅H₉NH₂]⁺·Cl⁻ or C₂₁H₂₄N₃PS·C₆H₁₄N⁺·Cl⁻, (II). The asymmetric unit of (I) consists of two independent phosphorothioic triamide molecules and one acetonitrile solvent molecule, whereas for (II), the asymmetric unit is composed of three components (molecule, cation and anion). In the structure of (I), the different components are organized into a six‐molecule aggregate through N—H...S and N—H...N hydrogen bonds. The components of (II) are aggregated into a two‐dimensional array through N—H...S and N—H...Cl hydrogen bonds. Moreover, interesting features of packing arise in this structure due to the presence of a double hydrogen‐bond acceptor (the S atom of the phosphorothioic triamide molecule) and of a double hydrogen‐bond donor (the N—H unit of the cation). For both (I) and (II), the full fingerprint plot of each component is asymmetric as a consequence of the presence of three fragments. These analyses reveal that H...H interactions [67.7 and 64.3% for the two symmetry‐independent phosphorothioic triamide molecules of (I), 30.7% for the acetonitrile solvent of (I), 63.8% in the phosphorothioic triamide molecule of (II) and 62.9% in the 3‐methylpiperidinium cation of (II)] outnumber the other contacts for all the components in both structures, except for the chloride anion of (II), which only receives the Cl...H contact. The phosphorothioic triamide molecules of both structures include unsaturated C atoms, thus presenting C...H/H...C interactions: 17.6 and 21% for the two symmetry‐independent phosphorothioic triamide molecules in (I), and 22.7% for the phosphorothioic triamide molecule of (II). Furthermore, the N—H...S hydrogen bonds in both (I) and (II), and the N—H...Cl hydrogen bonds in (II), are the most prominent interactions, appearing as large red spots on the Hirshfeld surface maps. The N...H/H...N contacts in structure (I) are considerable, whereas for (II), they give a negligible contribution to the total interactions in the system.     

Thermal decomposition mechanism of 1-ethyl-3-methylimidazolium bromide ionic liquid

In order to better understand the volatilization process for ionic liquids, the vapor evolved from heating the ionic liquid 1-ethyl-3-methylimidazolium bromide (EMIM(+)Br(-)) was analyzed via tunable vacuum ultraviolet photoionization time-of-flight mass spectrometry (VUV-PI-TOFMS) and thermogravimetric analysis mass spectrometry (TGA-MS). For this ionic liquid, the experimental results indicate that vaporization takes place via the evolution of alkyl bromides and alkylimidazoles, presumably through alkyl abstraction via an S(N)2 type mechanism, and that vaporization of intact ion pairs or the formation of carbenes is negligible. Activation enthalpies for the formation of the methyl and ethyl bromides were evaluated experimentally, ΔH(?)(CH(3)Br) = 116.1 ± 6.6 kJ/mol and ΔH(?)(CH(3)CH(2)Br) = 122.9 ± 7.2 kJ/mol, and the results are found to be in agreement with calculated values for the S(N)2 reactions. Comparisons of product photoionization efficiency (PIE) curves with literature data are in good agreement, and ab initio thermodynamics calculations are presented as further evidence for the proposed thermal decomposition mechanism. Estimates for the enthalpy of vaporization of EMIM(+)Br(-) and, by comparison, 1-butyl-3-methylimidazolium bromide (BMIM(+)Br(-)) from molecular dynamics calculations and their gas phase enthalpies of formation obtained by G4 calculations yield estimates for the ionic liquids' enthalpies of formation in the liquid phase: ΔH(vap)(298 K) (EMIM(+)Br(-)) = 168 ± 20 kJ/mol, ΔH(f,?gas)(298 K) (EMIM(+)Br(-)) = 38.4 ± 10 kJ/mol, ΔH(f,?liq)(298 K) (EMIM(+)Br(-)) = -130 ± 22 kJ/mol, ΔH(f,?gas)(298 K) (BMIM(+)Br(-)) = -5.6 ± 10 kJ/mol, and ΔH(f,?liq)(298 K) (BMIM(+)Br(-)) = -180 ± 20 kJ/mol.     

Fabrication of microporous membranes from melt extruded polypropylene precursor films via stretching: Effect of annealing

In this work, the effects of annealing conditions on the microstructure of polypropylene(PP) precursor films and further on the porous structure and permeability of stretched membranes were investigated. Combinations of WAXD, FTIR, DSC and DMA results clearly showed the crystalline orientation and crystallinity of the precursor film increased with annealing temperature, while the molecular chain entanglements in the amorphous phase decreased. Changes in the deformation behavior suggested more lamellar separation occurred for the films annealed at higher temperatures. Surface morphologies of the membranes examined by SEM revealed more pore number and uniform porous structure as the annealing temperature increased. In accordance with the SEM results, the permeability of the membranes increased with annealing temperature. On the other hand, it was found that 10 min was almost enough for the annealing process to obtain the microporous membranes with an optimal permeability.     

The use of umbelliferone in the synthesis of new heterocyclic compounds

New coumarin derivatives, namely 7-[(5-amino-1,3,4-thiadiazol-2-yl)methoxy]-2H-chromen-2-one, 5-[(2-oxo-2H-chromen-7-yloxy)methyl]-1,3,4-thiadiazol-2(3H)-one, 2-[2-(2-oxo-2H-chromen-7-yloxy)acetyl]-N-phenylhydrazinecarbothioamide, 7-[(5-(phenylamino)-1,3,4-thiadiazol-2-yl)methoxy]-2H-chromen-2-one and 7-[(5-mercapto-4-phenyl-4H-1,2,4-triazol-3-yl)methoxy]-2H-chromen-2-one were prepared starting from the natural compound umbelliferone. The newly synthesized compounds were characterized by elemental analysis and spectral studies (IR, 1H-NMR and 13C-NMR).