Assessment of Thermal Stability and Detonation Performance of 4-Amino-1,2,4-triazolium Nitrate as compared to 2,4,6-Trinitrotoluene for Melt-cast Explosives

4-Amino-1,2,4-triazolium nitrate (4-ATN) is an energetic and non-sensitive ionic liquid, which was introduced as a good candidate in previous works for the replacement of 2,4,6-trinitrotoluene (TNT) in melt-cast explosives. Since previous studies used pure nitric acid for nitration of 4-ATN, the effect of the use of low price industrial nitric acids (50 %, 70 % and 98 %) is investigated on the percent yields of 4-ATN. The thermogravimetric and differential scanning calorimetry (TGA/DSC) are done on the synthesized 4-ATN with impure nitric acid at a heating rate of 10 K · min^–1 by the vacuum system. The obtained TGA/DSC curves confirm decomposition of 4-ATN involving melting and dissociation. Derivative thermogravimetric (DTG) curves of 4-ATN at various heating rates are applied to obtain activation energy of thermolysis by several model-free techniques. The calculated activation energies are in the range 78.7–87.7 kJ · mol^–1, which are about 10 kJ · mol^–1 more than the reported activation energy of industrial TNT (purity 98.2 %), i.e. 66–70 kJ · mol^–1. Assessments of detonation performance of 4-ATN are also compared with TNT, which show higher detonation performance of 4-ATN. Thus, 4-ATN can be used with nitramine compounds as melt-cast explosives with higher thermal stability and detonation performance than corresponding nitramine compound/TNT explosives.     

Trimesic acid is a suitable building block in triple four-component Ugi reaction: access to unique trivalent compounds

Monatshefte für Chemie - Chemical Monthly - A triple four-component Ugi reaction of isocyanide, amine, aldehyde, and trimesic acid as the acid component with three acidic functional groups in...     

A simple,rapid and effective protocol for synthesis of bis(pyrazolyl)methanes using nickel–guanidine complex immobilized on MCM-41

Research on Chemical Intermediates - In this paper, a rapid, easy and very efficient method for the synthesis of bis(pyrazolyl)methanes has been reported in the presence of nickel–guanidine...     

Water treatment: functional nanomaterials and applications from adsorption to photodegradation

Global efforts for engineering desired materials which are able to treat the water sources still are ongoing in the bench level methods. Considering adsorbent and photocatalytic materials as the main reliable candidates still are encountering with struggles because of many challenges that restrict their large-scale application. This review comprehensively considered the recent advanced materials water treatment methods which involve to magnetic, activated carbon, carbon nanotubes (CNTs), graphene (G), graphene oxide (GO), (Graphene) quantum dots, carbon nanorods, carbon nano-onions, and reduced graphene oxide (RGO), zeolite, silica and clay-based nanomaterials. The adsorption and photocatalytic properties of these nanomaterials introduced them as highly potent option for heavy metal ions and organic dyes removal and photocatalytic degradation. High specific surface area in conjugation with presenting higher kinetics of adsorption and decomposition are the main characteristics of these materials which make them appropriate to treat wastewater even in ultralow concentration of the pollutants. Considering the mechanistic aspects of the adsorption and photocatalytic decomposition process, challenges and opportunities were other subjects that have been highlighted for the discussed nanomaterials. In term of the adsorption approaches, the mechanism of adsorptions and their influence on the maximum adsorption capacity were discussed and also for photocatalyst approach the radical active spices and their role in kinetic and efficiency of the organic pollutant decomposition were provided a deep discussion.     

4-Oxobenzo[d]1,2,3-triazin-pyridinium-phenylacetamide derivatives as new anti-Alzheimer agents: design,synthesis, in vitro evaluation,molecular modeling,and molecular dynamic study

Structural Chemistry - A new series of 4-oxobenzo[d]1,2,3-triazin-pyridinium-phenylacetamide hybrids 8a–p was designed, synthesized, and screened as the potential cholinesterase inhibitors...     

Heat transfer enhancement in a counter-flow sinusoidal parallel-plate heat exchanger partially filled with porous media using metal foam in the channels’ divergent sections

Journal of Thermal Analysis and Calorimetry - This is a numerical study of heat transfer and flow in a counter-flow sinusoidal parallel-plate heat exchanger using metal foam in the channels’...     

Numerical simulation of natural gas/diesel dual-fuel engine for investigation of performance and emission

Journal of Thermal Analysis and Calorimetry - Due to global concerns about the emissions, limited hydrocarbon fuel resources and high fuel prices, a lot of researches have been done to improve the...     

Hybrid thermal management of lithium-ion batteries using nanofluid,metal foam,and phase change material: an integrated numerical–experimental approach

Safety issues of Li-ion batteries imposed by unfavorable thermal behavior accentuate the need for efficient thermal management systems to prevent the runaway conditions. To that end, a hybrid thermal management system is designed and further investigated numerically and experimentally in the present study. The passive cooling system is fabricated by saturating copper foam with paraffin as the phase change material (PCM) and integrated with an active cooling system with alumina nanofluid as the coolant fluid. Results for various Reynolds numbers and different heating powers indicate that the hybrid nanofluid cooling system can successfully fulfill safe operation of the battery during stressful operating conditions. The maximum time in which all PCM field is changed to the liquid phase is defined as the onset of the stressful conditions. Therefore, the start time of stressful conditions at 41 W and Re 420 is increased from 3700 s with nanofluid composed of 1% volume fraction nanoparticles (VF-1%) to 4600 s with nanofluid VF-2% during high current discharge rates. Nanofluid cooling extends the operating time of the battery in comparison with the water-based cooling system with 200-s (nanofluid with volume fraction of 1%) and 900-s (nanofluid with volume fraction of 2%) increases in operating time at Reynolds of 420. Using nanofluid, instead of water, postpones the onset of paraffin phase transition effectively and prolongs its melting time which consequently leads to a decrease in the rate of temperature rise.

     

Nonlinear Mechanical Response of Polymer Matrix Composites: A Review

Abstract

The present article provides a review on the nonlinear mechanical behavior of polymer matrix composites (PMCs). Initially, essential mechanisms driving the nonlinear response of PMCs under different loading conditions are discussed. Rate-dependence, tension-compression asymmetry, viscous behavior, unloading characteristics, interaction between stress components and effects of environmental factors on mechanical properties are briefly reviewed. This is followed by a review of major approaches and constitutive models for predicting stress–strain behavior of PMCs. Following an increasing degree of complexity, models are categorized into four major classes: nonlinear elasticity models, elastic-plastic models, elastic-plastic-viscous models and Damage-Plasticity models. The vast number of existing models is mainly due to the anisotropy and inhomogeneity of PMCs. In brief, this review focuses on informing the reader of major frameworks, rather than addressing all the models in detail.     

Sizing of Irregular Particles Using a Phase Doppler System

Response of a phase Doppler system to irregularly shaped particles is examined and shown to deviate qualitatively as well as quantitatively from the spherical particles. Nevertheless, the measured phase distributions based on an ensemble of particles exhibit a high degree of order and simplicity. The experimental data and the stochastic modeling of the process have shown that the phase Doppler technique can be used successfully for in-situ sizing and velocimetry of irregular particles. In the case of irregular crystalline particles, mean size and standard deviation can be deduced without requiring any assumptions regarding the functional form of the size distribution. As opposed to other optical techniques, phase Doppler can be used, in principle, near the backscattering location, so that a single optical window would be employed for transmission of laser light and collection of the scattered signals. Furthermore, size measurements can be velocity-resolved, i.e. a size distribution can be associated with each bin of the velocity histogram.