Analytical Detectors Based on Microplasma Spectrometry

Miniaturizing all dimensions of apparatus, such as electronics and computers, is the current trend followed by scientists in various fields. The idea of Lab-on-a-Chip has significantly expanded and found its broad applications in analytical chemistry. Microplasmas can act as a sample excitation source and are the miniaturized versions of full-sized plasmas. These can be created in various forms, such as direct current, microwave induced, capacitively coupled and inductively coupled plasmas. Scaling down the size would reduce the amount of gases, liquids and consumables required, as well as the sample analysis time, which in turn would decrease the operating costs. Therefore, several research groups are involved in the development of microplasmas for utilisation in analytical instruments.     

Time-Resolved Fluorescence and Transient Spectroscopy in Determining Photochemical and Photophysical Channels in Reacting Systems in Solutions and Microheterogeneous Media

Abstract— Characterization of short-lived intermediates in homogeneous and microheterogeneous systems has been carried out using time-resolved spectroscopic techniques. The data obtained from these techniques have been analyzed in a relatively unconventional manner to elucidate complex transient behavior for two reactive systems. The highly nonexponential fluorescence decay for a series of fraws-stilbene-derivatized amphiphiles that readily form bilayer systems in aqueous media has been analyzed using a distribution of lifetimes analysis (DLA). The utility of DLA for quantitative studies was first determined by simulation of artificial decay data. Despite some limitations in DLA, qualitative conclusions as to the nature of the fluorescing species may be drawn when supplementary information such as steady-state spectroscopic data are also considered. The results indicate that the observed fluorescence originates from different types of excited-state species that consist of two or more trans-stilbene units; one of the emissions is attributed to the excited state of a ground-state aggregate while the other is assigned to an excimer that may arise from a 'defect'in the bilayer. The nonexponential nature of the decays is attributed to distributions of environments experienced by the fluorescing species. Electron transfer (ET) reactions between several excited pinacols and carbon tetrachloride in solution have been found to yield products with quantum yields that are higher than unity in the presence of oxygen, suggesting a chain mechanism for product formation. In these systems both the donor and the acceptor undergo bond fragmentation following the initial ET step. The individual steps involved in the proposed mechanism for these systems have been investigated in part using different steady-state and time-resolved laser spectroscopic techniques. However, it was also necessary to utilize pulse radiolysis in order to confirm the involvement of certain radical intermediates that were not observable by the usual flash photolysis techniques.     

Photocatalytic ozonation degradation of ciprofloxacin using ZnO nanoparticles immobilized on the surface of stones

Ciprofloxacin is used in the treatment of bacterial infections. Because ciprofloxacin is not effectively degraded by biological processes, advanced oxidation processes such as photocatalytic ozonation are applied to remove this antibiotic from wastewater. The aim of this study was to investigate photocatalytic ozonation for the removal of ciprofloxacin from aquatic environments and optimization of the effective parameters of the process. For this purpose, ZnO nanoparticles were synthesized using the thermal method and immobilized on the surface of stones. The structural properties of the nanoparticles were determined by XRD, TEM, Photoluminescence (PL) and SEM. Experiments were carried out in a Plexiglas reactor supported with the continuous injection of ozone. The effective parameters for removal efficiency were reaction time, initial concentration of ciprofloxacin, pH, photocatalyst concentration and reaction kinetics. The highest ciprofloxacin removal efficiency occurred at the following optimal conditions: pH of 7, reaction time of 30?min, photocatalyst concentration of 3?g/L and initial ciprofloxacin concentration of 10?mg/L. Removal efficiency of 96% was obtained under these conditions. Linear kinetic models showed that the process followed pseudo-first order and Langmuir-Hinshelwood kinetics. This process had a high removal efficiency and suitable for removal of ciprofloxacin from aquatic environments.GRAPHICAL ABSTRACT     

Dynamic headspace liquid-phase microextraction of alcohols

A method was developed using dynamic headspace liquid-phase microextraction and gas chromatography-mass spectrometry for extraction and determination of 9 alcohols from water samples. Four different solvents, hexyl acetate, n-octanol, o-xylene and n-decane were studied as extractants. The analytes were extracted using 0.8 microl of n-octanol from the headspace of a 2 ml sample solution. The effect of sampling volume, solvent volume, sample temperature, syringe plunger withdrawal rate and ionic strength of the solution on the extraction performance were studied. A semiautomated system including a variable speed stirring motor was used to ensure a uniform movement of syringe plunger through the barrel. The method provided a fairly good precision for all compounds (5.5-9.3%), except methanol (16.4%). Detection limits were found to be between 1 and 97 microg/l within an extraction time of approximately 9.5 min under GC-MS in full scan mode.     

Comparison of quantitative methods for analysis of polyphasic pharmaceuticals

Adequate very sensitive quantification methods are needed for the development and are also now required for the monitoring of undesirable solid form(s) as routine tests. The pre-requisite for quantitation are selectivity, sensitivity and most important the purity of standards and their proper storage, what is a challenge for metastable forms. Several analytical techniques are available such as X-ray diffraction, spectroscopy, thermal analysis and microcalorimetry. The different steps of the validation of the analytical methods and problems to be solved are discussed. Examples illustrate the different techniques and compare their possible advantages and limits. The relative standard deviation of measurements should allow for checking the homogenization procedure of mixtures for calibration. The validation should be carried out following ICH guidelines for validation of analytical methods. Comparison of different techniques in adequate concentration range add confidence in the analytical results.     

Temperature influence on hydrogen sorption in palladium limited-volume electrodes (Pd-LVE)

The effect of temperature on hydrogen and deuterium electrosorption into a palladium LVE (limited-volume electrode) has been investigated. A decrease in hydrogen capacity (H/Pd ratio) with increasing temperature has been observed. Temperature strongly influences the plots of measured H(D)/Pd values vs. potential scan rate. In addition, hydrogen absorption was found to be dependent on the composition of the surrounding electrolyte solution. These results have confirmed the hypothesis that two different mechanisms of hydrogen desorption from the palladium electrode take place, namely electrochemical oxidation and non-electrochemical recombination. Further, the ratio between the rate constants for these two processes has been found to change with temperature. Electronic Publication     

Application of high-field NMR and cryogenic probe technologies in the structural elucidation of poecillastrin a,a new antitumor macrolide lactam from the sponge poecillastra species

Poecillastrin A (1), a new polyketide-derived macrolide lactam, was isolated from a deep-water collection of the marine sponge Poecillastra species. The structure of poecillastrin A (1) was assigned using NMR data acquired at 500 MHz with an inverse-detection cryogenic probe and at 800 MHz with a room-temperature probe.