Mechanical response of proton beam irradiated nitinol

The present investigation deals with the study of mechanical behavior of proton beam irradiated nitinol at room temperature. The specimens in austenitic phase were irradiated over periods of 15, 30, 45 and 60 min at room temperature using 2 MeV proton beam obtained from Pelletron accelerator. The stress-strain curves of both unirradiated and irradiated specimens were obtained using a universal testing machine at room temperature. The results of the experiment show that an intermediate rhombohedral (R) phase has been introduced between austenite and martensite phase, which resulted in the suppression of direct transformation from austenite to martensite (A-M). Stresses required to start R-phase (σ_RS) and martensitic phase (σ_MS) were observed to decrease with increase in exposure time. The hardness tests of samples before and after irradiation were also carried out using Vickers hardness tester. The comparison reveals that the hardness is higher in irradiated specimens than that of the unirradiated one. The increase in hardness is quite sharp in specimens irradiated for 15 min, which then increases linearly as the exposure time is increased up to 60 min. The generation of R-phase, variations in the transformation stresses σ_RS and σ_MS and increase in hardness of irradiated nitinol may be attributed to lattice disorder and associated changes in crystal structure induced by proton beam irradiation.     

Solitary Wave Solutions for Generalized Rosenau-KdV Equation

In this work, we study the generalized Rosenau-KdV equation. We shall use the sech-ansätze method to derive the solitary wave solutions of this equation.     

Exact Solutions of the Klein-Gordon Equation for the Scarf-Type Potential via Nikiforov-Uvarov Method

In this paper we present the exact solutions of the one-dimensional Klein-Gordon equation for the Scarf-type potential with equal scalar and vector potentials. Exact solutions and corresponding energy eigenvalues equation are obtained using Nikiforov-Uvarov mathematical method for the s-wave bound state. The PT-symmetry and Hermiticity for this potential are also considered. It will be shown that the obtained results of the Scarf-type potential are reduced to the results of the well-known potentials in the special cases.     

Laser-assisted one-step fabrication of homogeneous glass–silver composite

Glass doped with silver ions was fabricated using a dry technique and then irradiated at the scanning speed of 14 mm?s^?1 using a nanosecond pulsed Nd:YVO₄ laser operating at 355?nm. This led to the spatially selective, one-step precipitation of silver particles and fabrication of a homogeneously structured optical composite material: glass?Csilver composite. The optical and structural properties of such composite material can be designed at will, which could have potential impact on light/plasmon wave and sensing technologies, optoelectronics, and surface enhanced Raman spectroscopy.     

Assessment model of classroom acoustics criteria for enhancing speech intelligibility and learning quality

In this paper, a new classroom acoustics assessment model (CAAM) based on analytic hierarchy process (AHP) for enhancing speech intelligibility and learning quality is proposed. The model is based on five main criteria that affect the learning process and related to classrooms acoustical properties. These include classroom specifications, noise sources inside and outside the classroom, teaching style, and vocal effort. The priority and weights of these major criteria along with their alternatives are identified using the views of students, staff, education consultants, and expertise by using a developed questionnaire, and the AHP methodology. This model can be considered as a helpful framework enabling universities decision makers to take effective decisions on classroom acoustics treatment issues. It also provides colleges’ higher authorities the suitable guidelines that help for determining necessary requirements that help to raise the quality and efficiency of the educational environment; in order to reach an excellent learning environment; and hence increasing students learning outcomes.     

Perfect valley polarization in MoS<Subscript>2</Subscript>

We study perfect valley polarization in a molybdenum disulfide (MoS₂) nanoribbon monolayer using two bands Hamiltonian model and non-equilibrium Green’s function method. The device consists of a one-dimensional quantum wire of MoS₂ monolayer sandwiched between two zigzag MoS₂ nanoribbons such that the sites A and B of the honeycomb lattice are constructed by the molecular orbital of Mo atoms, only. Spin-valley coupling is seen in energy dispersion curve due to the inversion asymmetry and time-reversal symmetry. Although, the time reversal symmetry is broken by applying an external magnetic field, the valley polarization is very small. A valley polarization equal to 46% can be achieved using an exchange field of 0.13 eV. It is shown that a particular spin-valley combination with perfect valley polarization can be selected based on a given set of exchange field and gate voltage as input parameters. Therefore, the valley polarization can be detected by detecting the spin degree of freedom.     

The electronic transport properties of defected bilayer sliding armchair graphene nanoribbons

By applying non-equilibrium Green's functions (NEGF) in combination with tight-binding (TB) model, we investigate and compare the electronic transport properties of perfect and defected bilayer armchair graphene nanoribbons (BAGNRs) under finite bias. Two typical defects which are placed in the middle of top layer (i.e. single vacancy (SV) and stone wale (SW) defects) are examined. The results reveal that in both perfect and defected bilayers, the maximum current refers to β-AB, AA and α-AB stacking orders, respectively, since the intermolecular interactions are stronger in them. Moreover it is observed that a SV decreases the current in all stacking orders, but the effects of a SW defect is nearly unpredictable. Besides, we introduced a sequential switching behavior and the effects of defects on the switching performance is studied as well. We found that a SW defect can significantly improve the switching behavior of a bilayer system. Transmission spectrum, band structure, molecular energy spectrum and molecular projected self-consistent Hamiltonian (MPSH) are analyzed subsequently to understand the electronic transport properties of these bilayer devices which can be used in developing nano-scale bilayer systems.     

Electrical characterization of strontium tartrate single crystals

The a.c. and d.c. conductivity of SrC₄H₄O₆·3H₂O are measured and are found to lie between usual conductivities of semiconductor and insulator. Temperature dependence of d.c. conductivity shows intrinsic conduction, which is confirmed by the slope of versus data. Due to application of thermal energy, noticeable conductivity peaks imply liberation of water molecules during dehydration and the formation of strontium oxalate. The conductivity plot has a nature similar to the intrinsic-to-extrinsic transition found in normal semiconductors. There occurs Efros hopping conduction in our samples.     

Probing noise in flux qubits via macroscopic resonant tunneling

Macroscopic resonant tunneling between the two lowest lying states of a bistable rf SQUID is used to characterize noise in a flux qubit. Measurements of the incoherent decay rate as a function of flux bias revealed a Gaussian-shaped profile that is not peaked at the resonance point but is shifted to a bias at which the initial well is higher than the target well. The rms amplitude of the noise, which is proportional to the dephasing rate 1/tauphi, was observed to be weakly dependent on temperature below 70 mK. Analysis of these results indicates that the dominant source of low energy flux noise in this device is a quantum mechanical environment in thermal equilibrium.