A noble method for molten carbonate fuel cells electrolyte manufacturing

An economic process for manufacturing of molten carbonate fuel cells was developed. This process consisted of fabricating the matrix by simply cutting it from a highly porous part with the geometry like an insulator brick, brush painting of the cathode layer followed by sintering and deposition of anode layer through thermal spray process. In order to manage the electrolyte content in the matrix and electrodes, coating of outer surfaces of the produced matrix with alumina slurry provided the required pores with small size at the interfaces with the electrodes. The polarization curves of the cells with alumina slurry coating and without it were not significantly different. The produced layer with small pores at the matrix outer surfaces caused the vaporization of the molten carbonate salt electrolyte to be reduced from 22.9% to 14.4% of initially infiltrated in salt weight content within 100 h of heat treating at 650 °C. This is at the same time to have the benefit of larger supply of electrolyte due to the application of highly porous matrix.     

Synthesis of Some New Triphenylphosphanylidenes,Alkylphosphonates, and Heterocycles of Pyrazole Derivatives and Their Antimicrobial Activity

Abstract

The reaction of 5(4H)-pyrazolone with phosphorus ylides afforded new triphenylphosphanylidene alkanone derivatives. Moreover, its benzylidene derivative reacted with Wittig–Horner reagents to give the corresponding dialkoxyphosphoryl, alkyl phosphonate, and heterocyclic products. Treatment of pyrazole-4-carbaldehyde with Wittig–Horner reagents and trialkyl phosphites gave the respective alkyl phosphonate adducts. Mechanisms accounting for the formation of the new products are discussed. The biological activity of some of the newly synthesized compounds was also examined.     

Application of Alizarine Derivatives as Chromogenic Reagents for the Spectrophotometric Determination of Some Sulfa Drugs

A spectrophotometric procedure for the determination of six pharmaceutical sulfonamides containing a primary aromatic amino group using alizarine (I), alizarine blue (II), alizarine red (III), and quinalizarine (IV), that offers advantages of simplicity, rapidity, sensitivity, precision, and stability, has been developed. The proposed method is based on the formation of colored products with the chromogenic reagents (I-IV). A linear correlation was found between absorbance at λ_max and the concentration. For more accurate results, Ringbom optimum concentration ranges are evaluated. The molar absorptivities (ε), absorptivities (a), and Sandell sensitivities for all sulfonamides derivatives with the chromogenic reagents tested were calculated. The procedures developed are applied for bulk sulfa drugs and some of their dosage forms.     

Antioxidant, antimicrobial and tyrosinase inhibitory activities of xanthones isolated from Artocarpus obtusus F.M. Jarrett

One of the most promising plants in biological screening test results of thirteen Artocarpus species was Artocarpus obtusus FM Jarrett and detailed phytochemical investigation of powdered dried bark of the plant has led to the isolation and identification of three xanthones; pyranocycloartobiloxanthone A (1), dihydroartoindonesianin C (2) and pyranocycloartobiloxanthone B (3). These compounds were screened for antioxidant, antimicrobial and tyrosinase inhibitory activities. Pyranocycloartobiloxanthone A (1) exhibited a strong free radical scavenger towards DPPH free radicals with IC50 value of 2 μg/mL with prominent discoloration observed in comparison with standard ascorbic acid, α-tocopherol and quercetin, The compound also exhibited antibacterial activity against methicillin resistant Staphylococcus aureus (ATCC3359) and Bacillus subtilis (clinically isolated) with inhibition zone of 20 and 12 mm, respectively. However the other two xanthones were found to be inactive. For the tyrosinase inhibitory activity, again compound (1) displayed strong activity comparable with the standard kojic acid.     

Anti-angiogenic activity of Morinda citrifolia extracts and its chemical constituents

Morinda citrifolia L. has been used for the treatment of a wide variety of diseases, including cancer. This study was undertaken to evaluate the anti-angiogenic effect of M. citrifolia fruits and leaves. Anti-angiogenic activity was evaluated in?vivo using the chick chorioallantoic membrane assay. Bioactivity-guided fractionation and isolation were performed to identify the active constituent, and high-performance liquid chromatography analysis was then used to quantify the amount of this active constituent in the active extracts and fraction. The methanol extracts of fruits and leaves of M. citrifolia and the subsequent chloroform fraction of the fruit methanolic extract were found to have potential anti-angiogenic activity and were more potent compared to suramin. Scopoletin was identified as one of the chemical constituents that may be partly responsible for the anti-angiogenic activity of M. citrifolia fruits. The present findings further support the use of M. citrifolia in cancer or other pathological conditions related to angiogenesis.     

Antioxidative properties of defatted dabai pulp and peel prepared by solid phase extraction

Solid phase extraction (SPE) using Sep-Pak^? cartridges is one of the techniques used for fractionation of antioxidant compounds in waste of dabai oil extraction (defatted dabai parts). The aim of this study was to determine the phenolic compounds and antioxidant capacity in crude extracts and several SPE fractions from methanolic extract of defatted dabai pulp and peel. Based on SPE, Sep-Pak^? cyanopropyl and C₁₈ cartridges were used to fractionate the antioxidant-rich crude extracts into water and methanolic fractions. Analyzed using LC-MS, flavonoids, anthocyanins, saponin derivatives and other unknown antioxidative compounds were detected in the defatted dabai crude extracts and their SPE fractions. Anthocyanins were the major phenolic compounds identified in the defatted dabai peel and detected in most of the SPE fractions. Methanolic fractions of defatted dabai parts embraced higher total phenolics and antioxidant capacity than water fractions. This finding also revealed the crude extracts of defatted dabai peel have the most significant antioxidant properties compared to the methanolic and water fractions studied. The crude extract of defatted dabai parts remain as the most potent antioxidant as it contains mixture of flavonoids, anthocyanins and other potential antioxidants.     

Phytochemical analysis, cytotoxic activity and constituents-activity relationships of the leaves of Cinnamomum iners (Reinw. ex Blume-Lauraceae)

The leaves of Cinnamomum iners (Reinw. ex Blume-Lauraceae) have been refluxed successively with chloroform and alcohol to get chloroform extract and alcoholic extract. Both the extracts have been assayed for cytotoxicity against human colorectal tumour cells. The chloroform extract exhibited significant cytotoxicity with IC(50) 31?μg mL(-1) (p??200?μg mL(-1). The chloroform extract has been further proceeded for chemical analysis by GC-TOFMS and 178 components were identified including acids, amines, amides, aldehydes, alcohols, esters, benzene derivatives, bicyclic compounds, terpenes, hydrocarbons, naphthalene derivatives, furan derivatives, azulenes, etc. Nine components representing 51.73% of the total chloroform extract were detected as major components. Caryophyllene (14.41%) and Eicosanoic acid ethyl ester (12.17%) are the most prominent components of the chloroform extract. β-Caryophyllene (14.41%) as most abundant compound supports potent cytotoxicity as shown by chloroform extract.     

Catalytic Chain-Transfer in Polymerization of Methyl Methacrylate. I. Chain-Length Dependence of Chain-Transfer Coefficient

Free-radical polymerization of methyl methacrylate has been conducted in the presence of a new catalytic chain-transfer agent at different temperatures. The new catalyst exhibits a strong chain transfer characteristic, and the chain-transfer coefficient varies from 2.8 × 10⁴ to 6.6 × 10⁴ and depends on chain length and temperature. The chain-transfer coefficients decrease with increasing chain length but reach a limiting value for chains more than 8 units in length. The activation energy for the chain transfer coefficient is -10.1 kJ/mol for this catalyst.     

Sodium Bromide Catalysed Regioselective Cleavage of Oxitanes with Chlorotrimethylsilane

Sodium bromide efficiently catalyses the regioselective cleavage of oxiranes with chlorotrimethylsilane to the corresponding O-silylated chlorohydrins in excellent yields.