Electrical characterization of strontium tartrate single crystals

The a.c. and d.c. conductivity of SrC₄H₄O₆·3H₂O are measured and are found to lie between usual conductivities of semiconductor and insulator. Temperature dependence of d.c. conductivity shows intrinsic conduction, which is confirmed by the slope of versus data. Due to application of thermal energy, noticeable conductivity peaks imply liberation of water molecules during dehydration and the formation of strontium oxalate. The conductivity plot has a nature similar to the intrinsic-to-extrinsic transition found in normal semiconductors. There occurs Efros hopping conduction in our samples.     

Degenerate ground state in a mesoscopic YBa2Cu3O(7-x) grain boundary Josephson junction

We have measured the current-phase relationship I(varphi) of symmetric 45 degrees YBa2Cu3O7-x grain boundary Josephson junctions. Substantial deviations of the Josephson current from conventional tunnel-junction behavior have been observed: (i) The critical current exhibits, as a function of temperature T, a local minimum at a temperature T*. (ii) At T approximately T*, the first harmonic of I(phi) changes sign. (iii) For T相似文献   

Structural,magnetic and electrical properties of Co1−xZnxFe2O4 synthesized by co-precipitation method

Nanoparticles of Co_1−xZn_xFe₂O₄ with stoichiometric proportion (x) varying from 0.0 to 0.6 were prepared by the chemical co-precipitation method. The samples were sintered at 600 °C for 2 h and were characterized by X-ray diffraction (XRD), low field AC magnetic susceptibility, DC electrical resistivity and dielectric constant measurements. From the analysis of XRD patterns, the nanocrystalline ferrite had been obtained at pH=12.5–13 and reaction time of 45 min. The particle size was calculated from the most intense peak (3 1 1) using the Scherrer formula. The size of precipitated particles lies within the range 12–16 nm, obtained at reaction temperature of 70 °C. The Curie temperature was obtained from AC magnetic susceptibility measurements in the range 77–850 K. It is observed that Curie temperature decreases with the increase of Zn concentration. DC electrical resistivity measurements were carried out by two-probe method from 370 to 580 K. Temperature-dependent DC electrical resistivity decreases with increase in temperature ensuring the semiconductor nature of the samples. DC electrical resistivity results are discussed in terms of polaron hopping model. Activation energy calculated from the DC electrical resistivity versus temperature for all the samples ranges from 0.658 to 0.849 eV. The drift mobility increases by increasing temperature due to decrease in DC electrical resisitivity. The dielectric constants are studied as a function of frequency in the range 100 Hz–1 MHz at room temperature. The dielectric constant decreases with increasing frequency for all the samples and follow the Maxwell–Wagner's interfacial polarization.     

Rapid preparative isolation of erythrocentaurin from Enicostemma littorale by medium‐pressure liquid chromatography,its estimation by high‐pressure thin‐layer chromatography,and its α‐amylase inhibitory activity

Erythrocentaurin is a relatively simple natural product present among the members of Gentianaceae. A preparative method for the isolation of erythrocentaurin from the ethyl acetate fraction of Enicostemma littorale using medium‐pressure liquid chromatography has been reported. The method consisted of a simple step gradient from 10 to 20% ethyl acetate in n‐hexane. Using a 70 × 460 mm Si60 column, this method is capable of processing 20 g of material in <3 h (purity ≈ 97%). The recovery of erythrocentaurin was 87.77%. Estimation of erythrocentaurin in extracts and fractions based on high‐pressure thin‐layer chromatography was carried out on silica gel 60 F₂₅₄ plates with toluene/ethyl acetate/formic acid (80:18:2 v/v/v) as the mobile phase. The densitometric analysis was performed at 230 nm. A well‐separated compact band of erythrocentaurin appeared at R_f 0.54 ± 0.04. The analytical method showed good linearity in the concentration range of 200–1500 ng/band with a correlation coefficient of 0.99417. The limits of detection and quantification were found to be ≈60 and ≈180 ng/band, respectively. Erythrocentaurin exhibited a concentration‐dependent α‐amylase inhibition (IC₅₀ 1.67 ± 0.28 mg/mL). The outcome of the study should be considered for pharmacokinetic and biotransformation studies involving E. littorale.     

Synthesis of β-Lactams from Acids and Imines Using Thiocarbonyldiimidazole

Thiocarbonyldiimidazole has been found to be an efficient acid activator for the synthesis of β-lactams by ketene-imine cycloaddition at room temperature. The experimental procedure is simple and results in excellent yields of the products. All products were characterized by spectral data and elemental analyses.     

Co‐ and Counterion Effect on the Micellization Characteristics of Dodecylpyridinium Chloride

Micellization parameters, critical micelle concentration (cmc), degree of counterion dissociation (α), aggregation number (n), critical packing parameter, and hydrophobic core volume of Dodecylpyridinium chloride (DPC) micelles were determined in presence of varying concentrations of sodium chloride (NaCl), sodium acetate (SAc), sodium propionate (SPr), ethylammonium chloride (EACl), diethylammonium chloride (DEACl), tetraethylammonium chloride (TEACl), and propylammonium chloride (PACl) through conductometric investigations at 298.15 K. The resulting data suggests that both counter and coions affect the cmc values‐cmc depressing tendency of the salts varies in order PACl≈NaCl>EACl>DEACl>TEACl>SPr>SAc, while the degree of counterion dissociation is dependent on the nature and concentration range of the added salt. Increasing salt concentration increases the relative hydrophobic volume of the micelles and coion has not much effect on aggregation number.     

Spatial-dependent probe transmission based high-precision two-dimensional atomic localization

Herein, we propose a scheme for the realization of two-dimensional atomic localization in aλ-type three-level atomic medium such that the atom interacts with the two orthogonal standing-wave fields and a probe field. Because of the spatially dependent atom-field interaction, the information about the position of the atom can be obtained by monitoring the probe transmission spectra of the weak probe field for the first time. A single and double sharp localized peaks are observed in the one-wavelength domain. We have theoretically archived high-resolution and high-precision atomic localization within a region smaller thanλ/25×λ/25. The results may have potential applications in the field of nano-lithography and advance laser cooling technology.     

Tailoring the optical and magnetic properties of La-BaM hexaferrites by Ni substitution

We investigate the impact of Ni insertion on the structural,optical,and magnetic properties of Ba_0.8La_0.2Fe_12-xNi_xO₁₉hexaferrites(Ni substituted La-BaM hexaferrites).Samples were prepared using the conventional co-precipitation method and sintered at 1000℃for 4 hours to assist the crystallization process.An analysis of the structure of the samples was carried out using an x-ray diffraction(XRD)spectrometer.The M-type hexagonal structure of all the samples was confirmed using XRD spectra.The lattice parameters a and c were found to be in the ranges of 5.8925±0.001 nm–5.8952±0.001 nm and 23.2123±0.001 nm–23.2219±0.001 nm,respectively.The M-type hexagonal nature of the prepared samples was also indicated by the presence of corresponding FT-IR bands and Raman modes in the FT-IR and Raman spectra,respectively.EDX results confirmed the successful synthesis of the samples according to the required stoichiometric ratio.A UV-vis spectrometer was used to record the absorption spectra of the prepared samples in the wavelength range of 200 nm–1100 nm.The optical energy bandgap of the samples was found to be in the range of 1.21 eV–3.39 eV.The M–H loops of the samples were measured at room temperature at an applied magnetic field range of 0 kOe–60 kOe.A high saturation magnetization of 99.92 emu/g was recorded in the sample with x=0 at a microwave operating frequency of 22.2 GHz.This high value of saturation magnetization is due to the substitution of La3+ions at the spin-up(12k,2a,and 2b)sites.The Ni substitution is proven to be a potential candidate for the tuning of the optical and magnetic parameters of M-type hexaferrites.Therefore,we suggest that the prepared samples are suitable for use in magneto-optic applications.     

New enantiomeric polylactide-block-poly(butylene succinate)-block-polylactides: syntheses, characterization and in situ self-assembly

In situ self-assemblies of new biodegradable triblock PLLA-b-PBS-b-PLLA and PDLA-b-PBS-b-PDLA have been investigated in acetonitrile solution. At first, two series of PLLA-b-PBS-b-PLLA and PDLA-b-PBS-b-PDLA, respectively denoted as the P and Q triblock copolyester series, were prepared with fixed PBS block ((overline) M(n,NMR) = 6.9 kDa) and diverse enantiomeric PLLA/PDLA blocks. Further, their chemical structures and thermal properties were characterized by means of titration, nuclear magnetic resonance spectroscopy (NMR), gel permeation chromatography (GPC), polarimeter, wide-angle X-ray diffraction (WAXD) and thermal analytical instruments. When mixing the synthesized enantiomeric copolyester pairs denoted as P(1)/Q(1) - P(8)/Q(8) in acetonitrile solution at 60 degrees C, in situ self-assemblies were found to happen for the P(4)/Q(4) to P(8)/Q(8) pairs, bearing longer enantiomeric PLA block lengths. DSC and WAXD analysis of the self-assembled microparticles demonstrated that PLLA/PDLA racemic crystals were formed for the P(5)/Q(5) - P(8)/Q(8) systems, as evidenced by their melting points over 200 degrees C, and a new X-ray diffraction peak detected at 2theta = 11.8 degrees . Moreover, morphological studies by scanning electron microscopy (SEM) indicated the formation of disk- or platelet-like microparticles. It was noted that the diameters of the microparticles self-assembled in situ decreased from 1.28-1.50 mum down to 480-660 nm, through tailoring the enantiomeric PLA block length. Other factors, such as a central PBS block, the enantiomeric block length and the preparation conditions were suggested to play important roles in the in situ self-assembly of these enantiomeric triblock copolyesters. These results provide a facile way to self-assemble hydrophobic, biodegradable microparticles, through tuning the important van der Waals stereocomplexation interactions between two enantiomeric blocks in solution.