Antioxidative properties of defatted dabai pulp and peel prepared by solid phase extraction

Solid phase extraction (SPE) using Sep-Pak^? cartridges is one of the techniques used for fractionation of antioxidant compounds in waste of dabai oil extraction (defatted dabai parts). The aim of this study was to determine the phenolic compounds and antioxidant capacity in crude extracts and several SPE fractions from methanolic extract of defatted dabai pulp and peel. Based on SPE, Sep-Pak^? cyanopropyl and C₁₈ cartridges were used to fractionate the antioxidant-rich crude extracts into water and methanolic fractions. Analyzed using LC-MS, flavonoids, anthocyanins, saponin derivatives and other unknown antioxidative compounds were detected in the defatted dabai crude extracts and their SPE fractions. Anthocyanins were the major phenolic compounds identified in the defatted dabai peel and detected in most of the SPE fractions. Methanolic fractions of defatted dabai parts embraced higher total phenolics and antioxidant capacity than water fractions. This finding also revealed the crude extracts of defatted dabai peel have the most significant antioxidant properties compared to the methanolic and water fractions studied. The crude extract of defatted dabai parts remain as the most potent antioxidant as it contains mixture of flavonoids, anthocyanins and other potential antioxidants.     

Antioxidant, antimicrobial and tyrosinase inhibitory activities of xanthones isolated from Artocarpus obtusus F.M. Jarrett

One of the most promising plants in biological screening test results of thirteen Artocarpus species was Artocarpus obtusus FM Jarrett and detailed phytochemical investigation of powdered dried bark of the plant has led to the isolation and identification of three xanthones; pyranocycloartobiloxanthone A (1), dihydroartoindonesianin C (2) and pyranocycloartobiloxanthone B (3). These compounds were screened for antioxidant, antimicrobial and tyrosinase inhibitory activities. Pyranocycloartobiloxanthone A (1) exhibited a strong free radical scavenger towards DPPH free radicals with IC50 value of 2 μg/mL with prominent discoloration observed in comparison with standard ascorbic acid, α-tocopherol and quercetin, The compound also exhibited antibacterial activity against methicillin resistant Staphylococcus aureus (ATCC3359) and Bacillus subtilis (clinically isolated) with inhibition zone of 20 and 12 mm, respectively. However the other two xanthones were found to be inactive. For the tyrosinase inhibitory activity, again compound (1) displayed strong activity comparable with the standard kojic acid.     

Gut microbiota, diet, and heart disease

Modulation of the gut microbiota is an area of growing interest, particularly for its link to improving and maintaining the systemic health of the host. It has been suggested to have potential to reduce risk factors associated with chronic diseases, such as elevated cholesterol levels in coronary heart disease (CHD). Diets of our evolutionary ancestors were largely based on plant foods, high in dietary fiber and fermentable substrate, and our gut microbiota has evolved against a background of such diets. Therapeutic diets that mimic plant-based diets from the early phases of human evolution may result in drug-like cholesterol reductions. In contrast, typical Western diets low in dietary fiber and fermentable substrate, and high in saturated and trans fatty acids, are likely contributors to the increased need for pharmacological agents for cholesterol reduction. The gut microbiota of those consuming a Western diet are likely underutilized and depleted of metabolic fuels, resulting in a less than optimal gut microbial profile. As a result, this diet is mismatched to our archaic gut microbiota and, therefore, to our genome, which has changed relatively little since humans first appeared. While the exact mechanism by which the gut microbiota may modulate cholesterol levels still remains uncertain, end products of bacterial fermentation, particularly the short chain fatty acids (i.e., propionate), have been suggested as potential candidates. While more research is required to clarify the potential link between gut microbiota and CHD risk reduction, consuming a therapeutic diet rich in plant foods, dietary fiber, and fermentable substrate would be a useful strategy for improving systemic health, possibly by altering the gut microbiota.     

Theoretical investigation of half‐metallicity in Co/Ni substituted AlN

Results of Co and Ni substituted AlN in the zinc blende phase are presented. For spin up states, the hybridized N‐2p and Co/Ni‐3d states form the valance bands with a bandgap around the Fermi level for both materials, while in the case of the spin down states, the hybridized states cross the Fermi level and hence show metallic nature. It is found that, Al_0.75Co_0.25N and Al_0.75Ni_0.25N are ferromagnetic materials with magnetic moments of 4 μ_B and 3 μ_B, respectively. The integer magnetic moments and the full spin polarization at the Fermi level make these compounds half‐metallic semiconductors. Furthermore it is also found that the interaction with the N‐2p state splits the 5‐fold degenerate Co/Ni‐3d states into t_2g and e_g states. The t_2g states are located at higher energies than the e_g states caused by the tetrahedral symmetry of these compounds. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Methods of multivariate data analysis applied to the investigation of fen soils

Fen soils from two sites of the Rhin-Havel-Luch, a peatland in the north-east of Germany, have been investigated. The samples have been collected in two horizons, representing different degrees of degradation and mineralisation of peat. Gravimetric measurements, energy dispersive X-ray fluorescence (EDXRF), elemental analysis, and ¹H low resolution nuclear magnetic resonance (LR-NMR) of the fen soil samples have been performed. By multivariate analysis of all the experimental data, especially by the principal component analysis (PCA) and by the cluster analysis, respectively, it was possible to classify the fen soils, to identify their characteristic properties, to detect temporal and local variations, and to prove representative field sampling. Furthermore, the correlation between variables of the applied analytical methods could be interpreted in context to the composition of fen soils and mutual influences of their properties.     

Axisymmetric non-Fourier temperature field in a hollow sphere

The non-Fourier axisymmetric (2+1)-dimensional temperature field within a hollow sphere is analytically investigated by the solution of the well-known Cattaneo–Vernotte hyperbolic heat conduction equation. The material is assumed to be homogeneous and isotropic with temperature-independent thermal properties. The method of solution is the standard separation of variables method. General linear time-independent boundary conditions are considered. Ultimately, the presented solution is applied to a (1+1)—as well as a (2+1)—dimensional problem, and their respective non-Fourier thermal behavior is studied. The present solution can be reduced to special cases of interest by choosing appropriate boundary conditions parameters. Dedicated to Prof. Gholamali Atefi, with appreciation and admiration on the occasion of his 65th birthday.     

Synthesis and characterization of cadmium tartrate single crystals

Efforts have been successful to crystallize the electroceramic compound of cadmium tartrate through silica hydrogel. Analysis of thermograms reveals decomposition of the crystals to take place within the temperature range 65 to 442°C in air atmosphere. Some important characteristic data, i.e., valance electron plasma energy, Penn gap, Fermi energy, interionic distance, electronic polarizability have been obtained. The DC conductivity of the crystal typically lies between the conductivities of metal and insulator and we derived several pertinent parameters such as hopping energy, hopping distance, coulomb gap, etc. The micromechanical indentation of the crystal shows nonlinear variation of the impact microhardness as a function of the applied load. The estimation of fracture toughness, fragility coefficient and yield strength has too been made for the synthesized crystal. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Tailoring the optical and magnetic properties of La-BaM hexaferrites by Ni substitution

We investigate the impact of Ni insertion on the structural,optical,and magnetic properties of Ba_0.8La_0.2Fe_12-xNi_xO₁₉hexaferrites(Ni substituted La-BaM hexaferrites).Samples were prepared using the conventional co-precipitation method and sintered at 1000℃for 4 hours to assist the crystallization process.An analysis of the structure of the samples was carried out using an x-ray diffraction(XRD)spectrometer.The M-type hexagonal structure of all the samples was confirmed using XRD spectra.The lattice parameters a and c were found to be in the ranges of 5.8925±0.001 nm–5.8952±0.001 nm and 23.2123±0.001 nm–23.2219±0.001 nm,respectively.The M-type hexagonal nature of the prepared samples was also indicated by the presence of corresponding FT-IR bands and Raman modes in the FT-IR and Raman spectra,respectively.EDX results confirmed the successful synthesis of the samples according to the required stoichiometric ratio.A UV-vis spectrometer was used to record the absorption spectra of the prepared samples in the wavelength range of 200 nm–1100 nm.The optical energy bandgap of the samples was found to be in the range of 1.21 eV–3.39 eV.The M–H loops of the samples were measured at room temperature at an applied magnetic field range of 0 kOe–60 kOe.A high saturation magnetization of 99.92 emu/g was recorded in the sample with x=0 at a microwave operating frequency of 22.2 GHz.This high value of saturation magnetization is due to the substitution of La3+ions at the spin-up(12k,2a,and 2b)sites.The Ni substitution is proven to be a potential candidate for the tuning of the optical and magnetic parameters of M-type hexaferrites.Therefore,we suggest that the prepared samples are suitable for use in magneto-optic applications.     

Effects of electrode size and surface morphology on electrode polarization in physiological buffers

Electrode polarization (EP) is inevitable in high conductivity buffers at low AC frequencies due to the accumulation of free charges at the electrode/electrolyte interface. Electrode miniaturization increases EP effect on impedance measurements. In this paper, six gold planar (GP) electrodes having different diameters () were used to investigate the size effect on EP with parallel plate electrode geometry. GP electrode surface was electrochemically deposited with gold nanostructures (GNs) to minimize the EP effect. Equivalent circuit model was used to attain electrode/electrolyte interfacial impedance. Constant phase element model was used to analyze the relation between the size and morphology of electrodes on EP. The surface morphology of gold nanostructured electrodes was examined using SEM, and the influence of different applied potential on the growth of GNs was elucidated with Nernst equilibrium condition. Surface roughness and wettability characteristics were examined performing surface roughness and contact angle measurements, respectively. The improvement of GNs deposited electrode performance was investigated by analytically generated Jurkat cell suspension spectra. The results show that the error in estimating the subcellular properties can be drastically reduced by using GNs deposited electrodes.