Optical properties of a polarizable linear magneto-cosserat fluid

General optical properties of polarizable linear magneto-Cosserat fluids are investigated. The constitutive dielectric tensor is generalized to include the effects of magnetic field and rotation vector, and the general expression for the refractive index is obtained. If the optical effects of the magnetic field and rotation vector are negligible, the fluid shows the same birefringent phenomena as a stokesian fluid and if the effect of magnetic field or rotation vector is dominant, the fluid shows double circular refraction. The coupling effect of the magnetic field and rotation vector is considered and special cases of slow motion and low conductivity are also discussed.     

Experimental investigation of noise radiation from a circular plate covered by polyurethane foam

An experimental investigation of the noise reduction achieved by covering a thin circular plate is reported. The plate boundary was unconstrained. One side of the plate was covered by sound-absorbing material so that noise radiation from the other side for different configurations of foam cover was measured and compared with the noise level obtained without any foam cover. It has been shown that substantial noise reduction can be achieved if a specific foam cover is used.     

Zeolites. Efficient and Eco-friendly Catalysts for the Synthesis of Benzimidazoles

Summary. A superior method of synthesis of 2-substituted benzimidazoles by means of the heterogeneous catalysis of synthetic and natural zeolites in the reaction of 1,2-diaminobenzene with acid chlorides is described.     

The use of stochastic analytic center for yield maximization of systems with general distributions of component values

This paper presents a new method for maximizing manufacturing yield when the realizations of system components are dependent random variables with general distributions. The method uses a new concept of stochastic analytic center introduced herein to design the unknown parameters of component values. Design specifications define a feasible region which, in the nonlinear case, is linearized using a first-order approximation. The resulting problem becomes a convex optimization problem. Monte Carlo simulation is used to evaluate the actual yield of the optimal designs of a tutorial example.     

An implicit two‐dimensional non‐hydrostatic model for free‐surface flows

An implicit finite volume model in sigma coordinate system is developed to simulate two‐dimensional (2D) vertical free surface flows, deploying a non‐hydrostatic pressure distribution. The algorithm is based on a projection method which solves the complete 2D Navier–Stokes equations in two steps. First the pressure term in the momentum equations is excluded and the resultant advection–diffusion equations are solved. In the second step the continuity and the momentum equation with only the pressure terms are solved to give a block tri‐diagonal system of equation with pressure as the unknown. This system can be solved by a direct matrix solver without iteration. A new implicit treatment of non‐hydrostatic pressure, similar to the lower layers is applied to the top layer which makes the model free of any hydrostatic pressure assumption all through the water column. This treatment enables the model to evaluate both free surface elevation and wave celerity more accurately. A series of numerical tests including free‐surface flows with significant vertical accelerations and nonlinear behaviour in shoaling zone are performed. Comparison between numerical results, analytical solutions and experimental data demonstrates a satisfactory performance. Copyright © 2006 John Wiley & Sons, Ltd.     

A device for X‐Ray elemental mapping using annular radioisotope source

An energy‐dispersive system is described for elemental mapping by X‐ray fluorescence spectrometry. The present study describes the design of an X‐ray fluorescence spectrometer and presents its performance in elemental mapping applications. The spectrometer is based on a new ring‐shaped collimator with a pinhole in the center of it and a ring‐shaped Am‐241 isotope mounted in the collimator as a source for excitation of X‐ray fluorescence. The photons were detected by high‐resolution Si (Li) detector coupled to a multi‐channel analyser and cooled by liquid nitrogen. In this study, we used two samples; one of them was made from pure elemental powders, and the second one was a piece of a stone and three types of maps were plotted. In the maps type one, the areas of the elements were shown with a single color. These maps only show the location of the elements in the sample. In the maps type two, the area of each element was shown with different colors because of the count (intensity) related to the area. In the third type of the maps for each element, depending on the elements' position on the sample, the counts were plotted in three dimensions. The areas with higher intensity have greater height, and areas with lower intensity have lower altitude. These two last types of maps provide information about the homogeneity or heterogeneity of the elemental distribution in the samples. The spectrometer can perform non‐destructive analyses of samples and objects in the air. Copyright © 2017 John Wiley & Sons, Ltd.     

Optical bistability and multistability in a defect slab doped by GaAs/AlGaAs multiple quantum wells

We proposed a new model for controlling the optical bistability(OB) and optical multistability(OM) in a defect slab doped with four-level GaAs/AlGaAs multiple quantum wells with 15 periods of 17.5 nm GaAs wells and 15-nm Al_(0.3)Ga_(0.7)As barriers. The effects of biexciton energy renormalization, exciton spin relaxation, and thickness of the slab on the OB and OM properties of the defect slab were theoretically investigated. We found that the transition from OB to OM or vice versa is possible by adjusting the controllable parameters in a lab. Moreover, the transmission, reflection, and absorption properties of the weak probe light through the slab were also discussed in detail.     

Analysis of Co-Tunneling Current in Fullerene Single-Electron Transistor

Single-electron transistors (SETs) are nano devices which can be used in low-power electronic systems. They operate based on coulomb blockade effect. This phenomenon controls single-electron tunneling and it switches the current in SET. On the other hand, co-tunneling process increases leakage current, so it reduces main current and reliability of SET. Due to co-tunneling phenomenon, main characteristics of fullerene SET with multiple islands are modelled in this research. Its performance is compared with silicon SET and consequently, research result reports that fullerene SET has lower leakage current and higher reliability than silicon counterpart. Based on the presented model, lower co-tunneling current is achieved by selection of fullerene as SET island material which leads to smaller value of the leakage current. Moreover, island length and the number of islands can affect on co-tunneling and then they tune the current flow in SET.     

Theoretical Investigation of Light Transmission in a Slab Cavity via Kerr Nonlinearity of Carbon Nanotube Quantum Dot Nanostructure

In this paper, we discuss the transmission properties of weak probe laser field propagate through slab cavity with defect layer of carbon-nanotube quantum dot (CNT-QD) nanostructure. We show that due to spin-orbit coupling, the double electromagnetically induced transparency (EIT) windows appear and the giant Kerr nonlinearity of the intracavity medium can lead to manipulating of transmission coefficient of weak probe light. The thickness effect of defect layer medium has also been analyzed on transmission properties of probe laser field. Our proposed model may be useful for integrated photonics devices based on CNT-QD for applications in all-optical systems which require multiple EIT effect.