Fundamental studies of mixed-gas inductively coupled plasmas

The effects of adding foreign gases to the central-gas flow or the intermediate-gas flow of an argon inductively coupled plasma are presented. In particular, the influence of up to 16.7% added helium, nitrogen or hydrogen on radially-resolved electron number density, electron temperature, gas-kinetic temperature and calcium ion emission profiles is examined. It is shown that these gases affect not only the fundamental parameters and bulk properties of the plasma, but also how energy is coupled and transported through the discharge and how that energy interacts with the sample. For example, added helium causes an increase in the gas-kinetic temperature, most likely due to the higher thermal conductivity of helium compared to argon but, in general, does not appear to affect significantly either the electron temperature or electron concentration. The shift in the calcium ion emission profile towards lower regions in the discharge with added helium may be attributable to higher droplet desolvation and particle vaporization rates. In contrast, the addition of nitrogen or hydrogen to an Inductively Coupled Argon Plasma (Ar ICP) results in dramatic changes in all three fundamental plasma parameters: electron number density, electron temperature, and gas-kinetic temperature. The net effect of these molecular gases (N₂ or H₂) on calcium ion emission and on the fundamental plasma parameters is shown to be dependent on the amount of gas added to the plasma and whether the gas is introduced as part of the central- or intermediate-gas flow. In general, nitrogen added to the central-gas flow causes a significant reduction in the number of electrons throughout most of the discharge (over an order of magnitude in certain regions), mainly in the central and upper zones of the ICP. A drop of 3000–5000 K in the central channel electron temperature and a smaller drop in the gas-kinetic temperature are also observed when N₂ is added to the central-gas flow. In contrast, the introduction of nitrogen in the intermediate flow causes about a 1 × 10¹⁵ electrons cm⁻³ increase in the electron concentration in the low, toroidal regions of the plasma and an increase in the gas-kinetic temperature of around 1000 K throughout most of the discharge. As seen with the addition of nitrogen to the central-gas flow, the electron temperature is found to increase in the toroidal zones of the plasma when N₂ is added to the intermediate flow. These combined effects cause a 20-fold depression in the calcium ion emission intensity only a 1.7-fold depression when N₂ is added to the central- or intermediate-gas flows, respectively. On the other hand, hydrogen causes a depression in the electron concentration in the upper areas of the plasma when this gas is added to the central flow but increases the number of electrons in the same region when added to the intermediate flow. Hydrogen also causes a dramatic effect on the electron and gas-kinetic temperatures, significantly increasing both of these parameters throughout the discharge. An increase in the calcium ion emission intensity, accompanied by a downward shift, elongation and broadening of the calcium ion emission profile is also observed with H₂ addition.     

Cover Picture: A Stepwise Annulation for the Transformation of Cyclic Ketones to Fused 6 and 7‐Membered Cyclic Enimines and Enones (Chin. J. Chem. 4/2019)

The cover picture shows a typical building within the Campus of Xiamen University displaying Chen Jiageng (Tan Kah Kee)'s style. Just like many beautiful buildings designed and constructed by human, Nature “designs and constructs” a huge number of useful molecules with fascinating structures called natural products. Many natural products possess a fused six or seven‐membered carbocyclic unity. On page 315–322, the Huang's group disclosed a three‐step “[2+n]” annulation method for the construction of fused six and seven‐membered carbocyclic enimines and enones. The method starts from simple cyclic ketones and terminal olefinic amides, and relies on both the Suzuki coupling reaction and the olefin‐amide based Friedel‐Crafts type acylating reaction, a method developed by Huang and coworkers.

     

5-Br-PADCAP分光光度法测定血清锌

为建立快速、简便、灵敏的分光光度法测定血清锌 ,在表面活性剂TritonX -1 0 0存在下 ,用 2 -(5 -溴 -2 -吡啶偶氮 ) -5 -[N ,N -二羧基甲基 ]苯酚 (5 -Br-PADCAP)作显色剂 ,不去蛋白分光光度法测定血清锌。结果表明 ,锌络合物最大吸收波长为 5 5 7nm ,线性范围 0～ 5 0 0μmol L ,摩尔吸光系数为 1 1 2× 1 0 5L·mol-1·cm-1。回收率为 99 9% ,批内变异系数 (CV)为2 1 % ,批间变异系数为 2 9% ,与原子吸收分光光度法 (x)比较具有良好的相关性 ,y =1 0 1 0x-0 1 5 4,r=0 991 8,P >0 0 5。可见本法测定血清锌不必去蛋白、用血量少、方法简便、灵敏可靠 ,适合临床应用     

Infrared-optical properties of vapour-deposited metal films

Spectroscopic infrared ellipsometry was applied to determine the optical constants of thin metal layers deposited on dielectric substrates such as glass or CaF(2). The layers were produced by evaporating gold or silver in a vacuum, and the coverage, that is the deposited mass per area, was chosen in the range 80-1200 mg m(-2) for gold, which refers to thicknesses in the lower nanometer range; in the case of the specifically lighter silver, about half the coverage was applied. At low coverage a metal island structure is obtained, which gives rise to surface-enhanced infrared absorption (SEIRA). Depending on the coverage, the deposited films exhibit either dielectric or metallic optical properties. Atomic force microscopy and conductivity measurements complement the spectroscopic observation.     

几种新的聚合物冠醚的合成及其络合与催化性能

由一、二、三和四缩乙二醇双钠盐与带有活泼卤原子的聚β-氯乙基缩水甘油醚进行环化反应,制备了四种新的聚合物冠醚(Ⅰ、Ⅱ、Ⅲ、Ⅳ)。络合容量测定结果表明,它们对K~+、Na~+均有较好的络合能力。在催化Wolff-Kishner(二苯甲酮腙还原为二苯甲烷)和正溴辛烷的碘代反应中,它们是有效的相转移催化剂。其中以Ⅱ最好,它的催化活性与小分子冠醚18-C-16和DB18-C-6相似,且易于回收,重复使用。     

Pt/HL和Pt/KL沸石在异丙醇分解反应中的不同催化行为

Ｐｔ／ＫＬ沸石在异丙醇分解反应中具有很高的脱氢活性,而Ｐｔ／ＨＬ沸石具有明显的缺电子性,在此反应中难以显示出脱氢活性,通过加氢作用,可使沸石的酸位免受积炭覆盖,从而可增强Ｐｔ／ＨＬ沸石的酸性催化作用。     

Elucidating dominant factors of PO43-, Cd2+ and nitrobenzene removal by biochar: A comparative investigation based on distinguishable biochars

Four distinct biochars were employed to remove three typical pollutants, meanwhile, path analysis, a multi-statistical regression method, was performed to elucidate the dominant factors of biochar adsorption. This work can provide a new insight to prepare a targeted biochar as adsorbents.     

珠江广州河段水中有机污染物的GC-MS分析

用吹扫捕集、树脂富集珠江广州河段海印断面水中有机物，毛细管色谱柱分离，用气相色谱－质谱联用方法测定有机污染物的组成，从水中鉴定出60个有机物，并作了定量分析；结果表明有机物种类多，污染较严重。     

Enzymatic surface modification of Kevlar fibers

Horseradish peroxidase catalyzed grafting of acrylamide (AM) onto Kevlar fibers has been studied. The modified fiber has been characterized with scanning electron microscopy (SEM), elemental analysis and the grafting yield. From the SEM micrographs, the surface of the grafted Kevlar fiber is rougher than that of the untreated fiber, and the elemental analysis indicated that the nitrogen content of the treated fibers is higher than that of the untreated fiber. All the results suggested that AM must have been grafted onto the Kevlar surface through HRP-mediated radical initiated grafting reaction. The probably mechanism of HRP catalyzed grafting of AM onto Kevlar surface is proposed.     

Electrospun cellulose acetate fibers: effect of solvent system on morphology and fiber diameter

This paper reports an investigation of the effects of solvent system, solution concentration, and applied electrostatic field strength (EFS) on the morphological appearance and/or size of as-spun cellulose acetate (CA) products. The single-solvent systems were acetone, chloroform, N,N -dimethylformamide (DMF), dichloromethane (DCM), methanol (MeOH), formic acid, and pyridine. The mixed-solvent systems were acetone–DMAc, chloroform–MeOH, and DCM–MeOH. Chloroform, DMF, DCM, MeOH, formic acid, and pyridine were able to dissolve CA, forming clear solutions (at 5% w/v), but electrospinning of these solutions produced mainly discrete beads. In contrast, electrospinning of the solution of CA in acetone produced short and beaded fibers. At the same solution concentration of 5% (w/v) electrospinning of the CA solutions was improved by addition of MeOH to either chloroform or DCM. For all the solvent systems investigated smooth fibers were obtained from 16% (w/v) CA solutions in 1:1, 2:1, and 3:1 (v/v) acetone–DMAc, 14–20% (w/v) CA solutions in 2:1 (v/v) acetone–DMAc, and 8–12% (w/v) CA solutions in 4:1 (v/v) DCM–MeOH. For the as-spun fibers from CA solutions in acetone–DMAc the average diameter ranged between 0.14 and 0.37 μm whereas for the fibers from solutions in DCM–MeOH it ranged between 0.48 and 1.58 μm. After submersion in distilled water for 24 h the as-spun CA fibers swelled appreciably (i.e. from 620 to 1110%) but the physical integrity of the fibrous structure remained intact.