Dependence of excess bismuth content in precursor sols on ferroelectric and dielectric properties of Bi3.25La0.75Ti3O12 thin films fabricated by chemical solution deposition

Bi_3.25La_0.75Ti₃O₁₂ (BLT) thin films were fabricated on Pt/Ti/SiO₂/Si(1 0 0) substrates by chemical solution deposition (CSD), and the dependence of ferroelectric and dielectric properties of the as-deposited BLT thin films on excess Bi content in precursor sols was studied. It is found that the prepared BLT thin film shows the best polarization-electric field, capacitance-voltage and dielectric constant (?_r)-frequency characteristics, when the value of excess Bi content in precursor sols is 10%. In detail, its remnant polarization (2P_r) value is 40 μC/cm², the capacitance tunability is 21% measured at room temperature under conditions of an applied voltage of 8 V and measurement frequency of 10 kHz, and the ?_r is 696 at 100 kHz frequency.     

Structural characterisation of Sb-based heterostructures by X-ray scattering methods

Antimonide-based superlattices dedicated to the elaboration of opto-electronic devices have been studied by X-ray scattering techniques. In particular, specular and non-specular X-ray reflectometry experiments have been performed on two MBE-samples elaborated with different shutter sequences at the interfaces. The results have shown a limitation of the incorporation of Sb species in the subsequent InAs layer for one of the samples, as expected.Then, a study on a InGaAs-cap layer/(InGaAs/AlAsSb)_N superlattice grown on a InGaAs/InP buffer layer by both specular X-ray reflectometry and High resolution X-ray diffraction is reported. In particular, the results have revealed the presence of a highly disturbed thin-layer on top of the MOVPE-made GaInAs, whose presence has been explained by In-concentration modification during the desoxidation procedure at the surface of the MOVPE-made GaInAs.Beside the results on the Sb-based heterostructures, the use of X-ray scattering metrology as a routinely working non-destructive testing method has been emphasized.     

In situ preparation of Bi-Sr-Ca-Cu-O superconducting films by laser sputtering

Superconducting films of Bi-Sr-Ca-Cu-O on (100) MgO substrates have been fabricated by XeCl-excimer-laser sputtering from ceramic targets of Bi_2.5Sr₂Ca₂Cu₃O_y in O₂ atmosphere. The films were polycrystalline with the c-axis (30.80±0.02Å) preferably oriented normal to the substrate surface. Without post-annealing the films showed metallic resistance behavior with zero resistance temperatures of up to T_c(0) }- 79 K. The critical current density of the films had values of up to j_c(50K)}- 10⁴ A/cm².     

Formation and magnetic properties of Co–Fe-based bulk metallic glasses with supercooled liquid region

A new Co–Fe-based ferromagnetic bulk metallic glass (BMG) was synthesized by copper mould casting method. The thermal stability and crystallization processes were investigated by differential scanning calorimetry (DSC) and X-ray diffraction (XRD). The soft magnetic behavior was studied by DC magnetic measurements. The high glass formation ability was interpreted in terms of the effective suppression of nucleation and growth of the intermetallic compounds which appear in the multicomponent system during solidification. The high thermal stability indicates that the new Co–Fe-based BMG could be used as high-temperature magnetic material. The low coercivity which was as low as 8 A/m for the as-cast sample was found in the Co–Fe-based metallic glass cylinder with a diameter of 1.5 mm.     

不同气压背景下激光烧蚀Al靶产生等离子体特性分析

用时间和空间分辨诊断技术研究了脉冲激光烧蚀不同气压环境下金属Ａｌ靶过程中产生的等离子体羽的特性。     

Nonlinear analysis of relativistic harmonic generation by intenselasers in plasmas

A linearly polarized, ultraintense laser field induces transverse plasma currents which are highly relativistic and nonlinear, resulting in the generation of coherent harmonic radiation in the forward direction (i.e., copropagating with the incident laser field). A nonlinear cold fluid model, valid for ultrahigh intensities, is formulated and used to analyze relativistic harmonic generation. The plasma density response is included self-consistently and is shown to significantly reduce the current driving the harmonic radiation. Phase detuning severely limits the growth of the harmonic radiation. The effects of diffraction are considered in the mildly relativistic limit. No third-harmonic signal emerges from a uniform plasma of near-infinite extent. A finite third-harmonic signal requires the use of a semi-infinite or finite slab plasma. For an initially uniform plasma, no second-harmonic radiation is generated. Generation of even harmonics requires transverse gradients in the initial plasma density profile     

Transversely polarized parton densities,their evolution and their measurement

The transverse spin asymmetry of a quark in a baryon and the linear polarization of a gluon in a vector meson are studied from thet-channel point of view. Using the Altarelli-Parisi approach, they are shown to obey independent evolution equations and to decrease with increasingQ ². We investigate the possibility to measure them at leading twist, to leading order in α and α_s and without analyzing the final polarizations. This requires simultaneous polarization of the beam and the target; the observable effect is in the azimuthal distribution of the highP _T particle or jet. Assuming a simple (quark+scalar diquark) model for the baryon, a large asymmetry is expected inp \(\bar p\) Drell-Yan collisions, a smaller one in highP _T pp collisions, from the interference term in the scattering of two identical quarks.     

Circles through two points that always enclose many points

This paper proves that any set of n points in the plane contains two points such that any circle through those two points encloses at least points of the set. The main ingredients used in the proof of this result are edge counting formulas for k-order Voronoi diagrams and a lower bound on the minimum number of semispaces of size at most k.Work on this paper by the first author has been supported by Amoco Fnd. Fac. Dev. Comput. Sci. 1-6-44862 and by the National Science Foundation under Grant CCR-8714565, by the second author has been partially supported by the Digital Equipment Corporation, by the fourth author has been partially supported by the Office of Naval Research under Grant N00014-86K-0416.     

An experimental investigation of high permittivity dielectric resonators for millimeter-wave microstrip components

This paper proposes a new type of high permittivity whispering gallery mode cylindrical dielectric resonators with a geometry which is very suitable for use in microstrip type integrated circuits. These oversized resonators, together with high Q factors and ease of fabrication, are potentially interesting for millimeter wave integrated filters and oscillators. In this paper, we report an experimental investigation of such resonators carried out in Ka band (26.5–40 GHz). Measured results including resonant frequencies and loaded quality factors will be presented. Application to millimeter wave filters will also be demonstrated.