Determination of nanomole quantities of lower aldehydes by cold-vapour atomic absorption spectrometry

A method is described for the determination of 10–100 nmole of methanal and 20–150 nmole of ethanal and propanal. The method is based on the oxidation of aldehydes to the corresponding acids by mercuric ion which in turn is reduced to elemental mercury, followed by cold-vapour atomic absorption spectrometry. Calibration plots were constructed between the concentration of each aldehyde and absorbance, while the calibration from the conventional cold vapour procedure was used for total aldehydes determination. The method is selective and can be used for aldehyde determination in the presence of ketones, acetals, alcohols, acids, esters, ethers, organic chlorides and epoxides. This simple method is characterised by 98–102% recoveries and standard deviations of 3%.     

System dynamics simulation model for assessing socio-economic impacts of different levels of environmental flow allocation in the Weihe River Basin,China

This study develops a complex system dynamics model (SD) reflecting interactions between water resources, Environmental Flow (EF) and socio-economy using SD software package “Vensim PLE”. The proposed model is employed to assess socio-economic impacts of different levels of EF allocation in the Weihe River Basin of China. Four alternative socio-economic growth patterns and four EF allocation schemes are designed to simulate those impacts. The results reveal that developed SD model performance well in reflecting the dynamic behavior of the system in the current study area. In the meanwhile, an optimal growth pattern considering both socio-economic growth and EF requirements are also found by comparing the different scenario simulation results.     

Determination of neutron flux parameters in PUSPATI TRIGA Mark II Research Reactor, Malaysia

In standardization NAA, it is necessary to characterize the neutron spectrum parameters such as epithermal neutron flux shape factor (α), thermal to epithermal neutron flux ratio (f), thermal neutron flux (φ _th) and epithermal neutron flux (φ _epi) in the irradiation facility to determine the concentration of an element in the sample using absolute and k ₀ standardization methods. The α and f were determined using Cd-ratio multi monitor method using experimental data obtained in PUSPATI TRIGA Mark II research reactor at four irradiation positions (10, 20, 30 and 40) of the rotary rack. The calculated values of α and f ranged from 0.006 to 0.0281 and 18.56 to 19.12 respectively. The average values of φ _th and φ _epi were found as 2.33 × 10¹² and 1.23 × 10¹¹ n cm^?2 s^?1 respectively. Moreover, a comparison of the neutron flux parameters in the present study shows an acceptable level of consistency with those of previous studies.     

Survey of Phenolic Acids,Flavonoids and In Vitro Antioxidant Potency Between Fig Peels and Pulps: Chemical and Chemometric Approach

In the present study, chromatic coordinates, phenolic acids, flavonoids and antioxidant capacity assessed by 1,1-diphenyl-2-picrylhydrazyl (DPPH), 2,2′-azino-bis (3-ethylbenzothiazoline-6-sulfonate (ABTS) and lipid peroxidation inhibition capacity (LPIC) essays and their relative IC50 were investigated in 25 fig cultivars growing in Morocco. The aims of this study were to determine (i) the variation in these compounds among light and dark-colored cultivars, (ii) their partitioning between fruit peel and pulp and (iii) to display network connections among these variables. Twelve phenolic compounds (PCs) were isolated in peel extract versus eight in pulp samples. Anthocyanins, mainly cyanidin-3,5-diglucoside and cyanidin-3-O-rutinoside, were the predominant compounds in peels, where the mean concentrations were 75.90 ± 18.76 and 77.97 ± 18.95 µg/g dw, respectively. On the other hand, (−)-epicatechin and cyanidin-3-O-rutinoside were the major compounds in the pulp extracts, where the mean values were 5.23 ± 4.03 and 9.01 ± 5.67 µg/g dw, respectively. A two-dimensional hierarchically clustered heatmap was applied to the dataset to explore correlations in the dataset and similarities between cultivars, without dimensionality reduction. Results showed that anthocyanins, particularly pelargonidin-3-O-rutinoside, cyanidin-3,5-diglucoside and cyanidin-3-O-rutinoside, were the main contributors to the peels’ free radical scavenging capacity. This capacity was particularly higher in the peel of dark-colored figs compared to the fruit pulp. The local cultivar “INRA 1301” showed the most promising phenolic profile due to its very high levels of almost all detected PCs, especially (−)-epicatechin, quercetin-3-O-rutinoside, quercetin-3-O-glucoside, cyanidine-3,5-diglucoside, cyanidine-3-O-rutinoside and pelargonidin-3-O-rutinoside (54.66, 141.08, 35.48, 494.08, 478.66, 12.56 µg/g dw, respectively). Having the darkest figs in the collection (L* = 25.72, c* = 22.09 and h° = 20.99), this cultivar has also combined promising IC50 values, which were of 19.85, 40.58 and 124.78 µg/mL for DPPH, ABTS and LPIC essays, respectively.     

Hydrogel networks of poly(ethylene oxide) star-molecules supported by expanded polytetrafluoroethylene membranes: characterization, biocompatibility evaluation and glucose diffusion characteristics

The present work discusses the grafting by electron beam irradiation of poly(ethylene oxide) (PEO) star-shaped polymers onto porous expanded polytetrafluoroethylene (EXPTFE) surfaces. The resulting materials are intended to combine the good biocompatible properties of PEO with the outstanding mechanical properties of PTFE. The star-shaped PEOs were synthesized via anionic polymerization. 3 Mev electron beam irradiation was applied to graft these PEO stars onto porous EXPTFE surfaces. The hydrophobic EXPTFE surface had to be pre-modified with N-vinylpyrrolidone. ESCA was used to quantify the amount of grafted star-shaped PEO. Unmodified EXPTFE surfaces are well known, when implanted in a body, to be rapidly covered by a layer of cells and fibrin. The EXPTFE coated with PEO were implanted in the peritoneal cavity of rats (or under the back skin). This implantation did not induce any inflammation reactions and SEM analysis had attested the absence of adsorbed cells and fibrin. The glucose diffusion properties of these membranes were studied by a lag time analysis method and compared to those of pure PEO hydrogels. As expected, glucose diffuses through the hydrogel coated membrane and diffusion is not affected by the presence of the EXPTFE membrane.     

Comparison of graphs associated to a commutative Artinian ring

Let R be a commutative ring with \(1\ne 0\) and the additive group \(R^+\). Several graphs on R have been introduced by many authors, among zero-divisor graph \(\Gamma _1(R)\), co-maximal graph \(\Gamma _2(R)\), annihilator graph AG(R), total graph \( T(\Gamma (R))\), cozero-divisors graph \(\Gamma _\mathrm{c}(R)\), equivalence classes graph \(\Gamma _\mathrm{E}(R)\) and the Cayley graph \(\mathrm{Cay}(R^+ ,Z^*(R))\). Shekarriz et al. (J. Commun. Algebra, 40 (2012) 2798–2807) gave some conditions under which total graph is isomorphic to \(\mathrm{Cay}(R^+ ,Z^*(R))\). Badawi (J. Commun. Algebra, 42 (2014) 108–121) showed that when R is a reduced ring, the annihilator graph is identical to the zero-divisor graph if and only if R has exactly two minimal prime ideals. The purpose of this paper is comparison of graphs associated to a commutative Artinian ring. Among the results, we prove that for a commutative finite ring R with \(|\mathrm{Max}(R)|=n \ge 3\), \( \Gamma _1(R) \simeq \Gamma _2(R)\) if and only if \(R\simeq \mathbb {Z}^n_2\); if and only if \(\Gamma _1(R) \simeq \Gamma _\mathrm{E}(R)\). Also the annihilator graph is identical to the cozero-divisor graph if and only if R is a Frobenius ring.     

Voltammetric Sensing of Mercury and Copper Cations at Poly(EDTA‐like) Film Modified Electrode

Complexing polymer‐coated electrodes have been synthesized by oxidative electropolymerization of ethylenediamine tetra‐N‐(3‐pyrrole‐1‐yl)propylacetamide (monomer L ). The presence of four polymerizable pyrrole fragments on the same EDTA skeleton was thought to confer enhanced rigidity and controlled dimensionality to the resulting complexing materials, which were used for the electrochemical detection of Hg(II), Cu(II), Pb(II) and Cd(II) ions by means of the chemical preconcentration‐anodic stripping technique. The polyamide electrode material showed particularly a significant selectivity towards mercury ions, even in the presence of a large excess of other metal cations. Moreover, the use of imprinted polymer‐coated electrodes prepared by electropolymerization of L in the presence of metal cations turned out to significantly improve the detection limits, down to 5×10^?10 mol L^?1 for Hg(II) and Cu(II) species.     

Predicted Influence of N-Acetyl Group Content on the Conformational Extension of Chitin and Chitosan Chains

ABSTRACT

Conformational analysis of chitosan molecules has been performed using the MM3(92) force field to investigate the role played by the acetamido groups on the stiffness of these chains. A high dielectric constant value was needed to model an aqueous environment and to reproduce the distribution of the N-acetyl glucosamine group orientation that is observed by NMR. Disaccharidic fragments, differently substituted at C2, were selected as models for chitin and chitosan chains. Their conformational space has been explored by means of adiabatic mapping of the glycosidic Φ,Ψ torsion angles. Although the overall features of all the potential energy surfaces created appear similar, the accessible conformational space of a glycosidic bond is affected by the nature of the substituent at C2 on the non-reducing residue of the disaccharide unit. This is illustrated by the differences in the calculated partition functions together with the predicted average homonuclear and heteronuclear coupling constants. Computed maps were used to predict polymeric unperturbed dimensions, characteristic ratio and persistence length of idealized chitin and chitosan chains, by Monte Carlo methods. Pure chitosan is predicted to be more coiled than pure chitin chains. At low N-acetyl group contents, chain extension appears to be dependent on the degree of substitution. Average chain dimensions increase monotonically for increases in content up to 60% of N-acetyl groups, but show no significant variation at higher contents. For molecules consisting of 50% amino and 50% N-acetylated residues, random, alternate and block patterns of substitution have been investigated. It has also been shown that the spatial extension of the polymer chains is dependent on the primary structure. Comparison with the literature experimental data is difficult because of the extreme diversity of the reported conformationally dependent values. However, such study provides a unique insight into the dependence of these two factors (degree of acetylation and distribution of acetyl groups) on the stiffness and flexibility of different chitin and chitosan chains.