Synthesis of zirconium diboride and its application in the protection of stainless steel surface in harsh environment

Journal of Solid State Electrochemistry - Surface degradation of steel is one of the key problems of steel end user because of the electrochemical reaction at the steel surface caused by...     

Photocured characteristics of fast photocurable acrylic formulations and investigations by differential photo calorimeter

Nanofluids are obtained by suspending metallic or non-metallic nanoparticles in conventional base liquids and can be employed to increase heat transfer rate in various applications. In this study, the effects of adding three types of nanofluids on turbulent convective heat transfer at the entrance region of a constant wall heat flux tube were experimentally studied. The nanofluids were mixtures of aluminium oxide, copper oxide, and silicon carbide at various nanoparticle volume fractions ranging from 0.0002 to 0.002 in water. The convective heat transfer coefficient was measured at different Reynolds numbers of 10,000–50,000. At these concentrations and Reynolds numbers, a maximum of 11–18% of convection heat transfer coefficient was observed as compared to the base fluid, showing a 6–9% increase on average. In this study, it was observed that changes in the nanoparticle type had no considerable effect on heat transfer coefficient increase. According to the model proposed here, the dimensionless thickness of laminar sub-layer is specified as a functional equation of the volume fraction of nanoparticles for each material.

     

Synthetic directions towards capsular polysaccharide of Streptococcus pneumoniae serotype 18C

An efficient synthetic strategy has been developed for the synthesis of the tri, tetrasaccharide block and pentasaccharide corresponding to the capsular polysaccharide of Streptococcus pneumonia serotype 18C as their 2-aminoethyl glycosides. A one-pot glycosylation-deprotection, sequential glycosylations strategy has been adopted for the construction of the fragments and pentasaccharide derivative, which were then transformed into target compound after a series of functional group transformations. The synthetic method relies on the use of p-methoxybenzyl ether as an in situ-removable protecting group to reduce the number of reaction steps significantly. Here H₂SO₄-silica has been used successfully as a promoter for all glycosylation reaction. In addition, the synthetic target also contained a free amino group at its reducing end, facilitating its conjugation with other molecules for various biological studies and applications.     

Paintable Room‐Temperature Phosphorescent Liquid Formulations of Alkylated Bromonaphthalimide

Organic phosphors have been widely explored with an understanding that crystalline molecular ordering is a requisite for enhanced intersystem crossing. In this context, we explored the room‐temperature phosphorescence features of a solvent‐free organic liquid phosphor in air. While alkyl chain substitution varied the physical states of the bromonaphthalimides, the phosphorescence remained unaltered for the solvent‐free liquid in air. As the first report, a solvent‐free liquid of a long swallow‐tailed bromonaphthalimide exhibits room‐temperature phosphorescence in air. Doping of the phosphor with carbonyl guests resulted in enhanced phosphorescence, and hence a large‐area paintable phosphorescent liquid composite with improved lifetime and quantum yield was developed.     

Stability‐indicating HPLC method for simultaneous quantification of 14 impurities in excedrin tablet formulations and identification of new impurity by LC–MS in accelerated stability studies

We developed novel stability‐indicating HPLC method for simultaneous estimation of 14 impurities in excedrin tablet, a formulation with a combination of acetaminophen, aspirin, and caffeine. In addition, a new impurity that was generated through degradation of aspirin at high temperatures during the accelerated stability conditions was positively identified and confirmed, using liquid chromatography–mass spectrometry technique. The HPLC method was optimized using the Inertsustain C₁₈, 250 × 4.6 mm, 5.0 μm column, employing simple gradient method. Forced degradation studies were performed under acidic, basic, oxidative and thermal conditions to prove the scope and stability‐indicating the nature of the method. The optimized method was validated as per the International Conference on Harmonization guidelines. The HPLC method showed linearity from LOQ concentration to 21 μg mL^?1. Precision and intermediate precision values were <5% RSD. The validated HPLC method is currently applied for the routine testing of excedrin tablet formulations in quality control laboratories.     

Crystal structure and DFT analyses of a pentacoordinated PCP pincer nickel(II) complex

The reaction of NiCl₂ with 1,3‐bis[(diphenylphosphanyl)methyl]hexahydropyrimidine in the presence of 2,6‐dimethylphenyl isocyanide and KPF₆ afforded a new pentacoordinated PCP pincer Ni^II complex, namely {1,3‐bis[(diphenylphosphanyl)methyl]hexahydropyrimidin‐2‐yl‐κN²}(2,6‐dimethylphenyl isocyanide‐κC)nickel(II) hexafluoridophosphate 0.70‐hydrate, [Ni(C₉H₉N)(C₃₀H₃₀ClN₂P₂)]PF₆·0.7H₂O or [NiCl{C(NCH₂PPh₂)₂(CH₂)₃‐κ³P,C,P′}(Xylyl‐NC)]PF₆·0.7H₂O, in very good yield. Its X‐ray structure showed a distorted square‐pyramidal geometry and the compound does not undergo dissociation in solution, as shown by variable‐temperature NMR and UV–Vis studies. Density functional theory (DFT) calculations provided an insight into the bonding; the nickel dsp²‐hybridized orbitals form the basal plane and the nearly pure p orbital forms the axial bond. This is consistent with the NBO (natural bond orbital) analysis of analogous nickel(II) complexes.     

Unified reciprocity of dithiophosphate by dichalcogenophosph(in)ate ligands on copper hydride nanoclusters via ligand exchange reaction

A structural study of ligand exchange on chalcogen‐passivated copper nanoclusters is far less developed. Herein, we report the synthesis of polyhydrido copper nanoclusters [Cu₂₀H₁₁{Se₂P(O ⁱBu)₂}₉] ( 2 ) passivated by Se‐donor ligands via ligand replacement reaction on [Cu₂₀H₁₁{S₂P(O ⁱPr)₂}₉] ( 1 ) with NH₄[Se₂P(O ⁱBu)₂]. In parallel to the synthesis of 2 , cluster [Cu₂₀H₁₁{S₂P(CH₂CH₂Ph)₂}₉] ( 4 ) was produced by the ligand exchange reaction on a new derivative of 1 , that is [Cu₂₀H₁₁{S₂P(O ⁿPr)₂}₉] ( 3 ). Solid state structures of both clusters 2 and 4 were unequivocally established by single‐crystal X‐ray diffraction studies and cluster 4 epitomizes exceptional case to preserve both the shape and size of the nanocluster during the course of ligand exchange. Structurally precise cluster 2 is the second example where the copper hydride nanocluster is stabilized by Se‐donor ligands. The anatomy of 2 can be visualized as a twisted cuboctahedral Cu₁₃ core, two triangular faces of which are capped by a Cu₆ cupola and a single Cu atom along the C₃ rotational axis.     

Encapsulating Au‐Fe3O4 Nanodots into AIE‐active Supramolecular Assemblies: Ambient Visible‐light Harvesting “Dip‐Strip” Photocatalyst for C−C/C−N Bond Formation Reactions

The present study demonstrates the development of a supramolecular porous ensemble consisting of hetero‐oligophenylene derivative 6 and Au‐Fe₃O₄ nanodots. Supramolecular assemblies of AIE‐active hetero‐oligophenylene derivative 6 served as reactors for the generation of Au‐Fe₃O₄ nanodots. The as prepared supramolecular ensemble functioned as an efficient recyclable photocatalytic system for C(sp²)?H bond activation of anilines for the construction of quinoline carboxylates. Interestingly, the “dip catalyst” prepared by depositing PTh‐co‐PANI‐6: Au‐Fe₃O₄ nanodots on a filter paper served as a recyclable strip (up to 10 cycles) for C?C/C?N bond formation reaction.     

Near‐IR Absorbing Ruthenium Complexes of Non‐Innocent 6,12‐Di(pyridin‐2‐yl)indolo[3,2‐b]carbazole: Variation as a Function of Co‐Ligands

This article deals with the hitherto unexplored metal complexes of deprotonated 6,12‐di(pyridin‐2‐yl)‐5,11‐dihydroindolo[3,2‐b]carbazole (H₂L). The synthesis and structural, optical, electrochemical characterization of dimeric [{Ru^III(acac)₂}₂(μ‐L^.?)]ClO₄ ([ 1 ]ClO₄, S=1/2), [{Ru^II(bpy)₂}₂(μ‐L^.?)](ClO₄)₃ ([ 2 ](ClO₄)₃, S=1/2), [{Ru^II(pap)₂}₂(μ‐L^2?)](ClO₄)₂ ([ 4 ](ClO₄)₂, S=0), and monomeric [(bpy)₂Ru^II(HL^?)]ClO₄ ([ 3 ]ClO₄, S=0), [(pap)₂Ru^II(HL^?)]ClO₄ ([ 5 ]ClO₄, S=0) (acac=σ‐donating acetylacetonate, bpy=moderately π‐accepting 2,2’‐bipyridine, pap=strongly π‐accepting 2‐phenylazopyridine) are reported. The radical and dianionic states of deprotonated L in isolated dimeric 1 ⁺/ 2 ³⁺ and 4 ²⁺, respectively, could be attributed to the varying electronic features of the ancillary (acac, bpy, and pap) ligands, as was reflected in their redox potentials. Perturbation of the energy level of the deprotonated L or HL upon coordination with {Ru(acac)₂}, {Ru(bpy)₂}, or {Ru(pap)₂} led to the smaller energy gap in the frontier molecular orbitals (FMO), resulting in bathochromically shifted NIR absorption bands (800–2000 nm) in the accessible redox states of the complexes, which varied to some extent as a function of the ancillary ligands. Spectroelectrochemical (UV/Vis/NIR, EPR) studies along with DFT/TD‐DFT calculations revealed (i) involvement of deprotonated L or HL in the oxidation processes owing to its redox non‐innocent potential and (ii) metal (Ru^III/Ru^II) or bpy/pap dominated reduction processes in 1 ⁺ or 2 ²⁺/ 3 ⁺/ 4 ²⁺/ 5 ⁺, respectively.