Physicochemical Characterization and Paper Spray Mass Spectrometry Analysis of Myrciaria Floribunda (H. West ex Willd.) O. Berg Accessions

Myrciaria floribunda, also known as rumberry, is a tree native to the Brazilian Atlantic Forest, where its fruits have the potential for commercial use. This study evaluates the antioxidant potential, determines the phytochemical profile, and chemically characterizes the rumberry fruit. Accessions were sampled from the Rumberry Active Germplasm Bank of the Federal University of Alagoas, Brazil. Physical characteristics, chemical characteristics, and phenolic compound content were analyzed. Chemical profile characterization was carried out using PSMS. Accessions had an average weight of 0.86 g. Accession AC137 presented a higher pulp yield (1.12 g). AC132 and AC156 had larger fruits, AC137 showed greater firmness (5.93 N), and AC160 had a higher and total phenolic content ratio (279.01 ± 11.11). Orange-colored accessions scored higher in evaluated parameters, except for AC160 for phenolic content. Thirty-two compounds were identified on positive ionization mode and 42 compounds on negative ionization mode using PSMS. Flavonoids, followed by the derivatives of benzoic acid, sugars, and phenylpropanoids, were the most prominent. Myricitrin, quercitrin, and catechin stand out as flavonoids that have been reported in previous studies with antioxidant and antimicrobial properties, in addition to health and therapeutical benefits, demonstrating the potential of the rumberry fruit.     

Ultrastructural analysis of microfilariae of Wuchereria bancrofti obtained from persistent carriers after repeated courses of diethylcarbamazine

Single dose of diethylcarbamazine (DEC) used in control programs is effective in breaking the transmission of filariasis. In order to investigate the effect of aggressive therapy on Wuchereria bancrofti (Wb) microfilariae, DEC was given to 29 patients who were positive for the circulating filarial antigen (CFA) assay but did not have clinical manifestations of filariasis, at 6 mg/kg/day for 12 days and again six months later using the same dosing regimen. For each patient, microfilarial density and serum CFA were followed up for two years. Ultrastructural analyses on Wb microfilariae obtained after repeated treatment with DEC were also performed. Microfilaremia and antigenemia decreased significantly after 12 months but returned to the initial levels after 24 months. This could indicate, as shown by other authors, that aggressive repeated therapy with DEC alone is ineffective in eradicating adult W. bancrofti, particularly in infected but asymptomatic individuals. The objective of the present study was to analyze the microfilaremic and antigenemic behavior and ultrastructural changes caused by different DEC concentrations in vitro in Wb microfilariae obtained from individuals who were sensitive and refractory to treatment. After in vitro treatment of the microfilariae using 5 and 10 μg/ml of DEC for 1 h, ultrastructural analysis revealed low levels of cell damage compared with embryos obtained from individuals from a different area who had never received DEC treatment before. The results obtained suggest that microfilariae from patients who receive repeated aggressive therapy are less sensitive to DEC in vitro.     

Study of rapid stress annealed nano-crystalline Fe74.5Cu1Nb3Si15.5B6 alloy

Rapid stress annealing induced changes in structural and magnetic properties in Fe_74.5Cu₁Nb₃Si_15.5B₆ are reported. Obtained results suggest changes in spin texture with preferred orientation along ribbon axis. Fraction of A site in the DO₃ lattice occupied by Si atoms, increases, with increase of applied stress during annealing. Volume fraction of the nanograins up to 60% (exhibiting quite similar mean grain diameter ～9 nm) is observed. Lattice parameter values suggest that Si content in the nanocrystalline phase is between 14% and 19% and increase of lattice parameter suggests the elongation of the unit cell. Studied stress annealed samples exhibit soft magnetic behavior (coercive field ranging between 4 and 8 Am^???1). Stress annealing reduces permeability whereas anisotropy field increases almost linearly exhibiting the induction of uniaxial and perpendicular to the ribbon axis anisotropy. Obtained stress-induced-anisotropy constant values range between 50 and 2,140 Jm^???3.     

Phase transitions in erbium-doped silicon exposed to laser radiation

The dynamics of phase transitions induced by nanopulsed ruby laser radiation (80 nsec, 2 J/cm²) both in silicon layers doped with erbium ions and in those containing doped erbium and oxygen have been studied by an optical probing method. It is shown that the reflectivity behavior of structures under pulsed irradiation is governed by phase transitions (melting and crystallization) of implanted silicon and also by interference effects at the interfaces of the resulting phases. It is established that the profiles of erbium distribution change under nanosecond laser irradiation and that the dopant is forced out to the surface due to a segregation effect at small implantation doses. As the implanatation dose increases, diffusion deep into the sample tends to prevail over segregation. A considerable increase in the photoluminescence peak intensity at 0.81 eV is found after both the pulsed laser processing and thermal post-annealing of doped samples as opposed to spectra of samples subjected either to thermal annealing or to pulsed laser irradiation. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 76, No. 2, pp. 225–231, March–April, 2009.     

DODAB and DODAC bilayer-like aggregates in the micromolar surfactant concentration domain

In the millimolar concentration domain (typically 1 mM), dioctadecyldimethylammonium bromide and chloride (DODAX, X representing Br⁻ or Cl⁻ counterions) molecules assemble in water as large unilamellar vesicles. Differential-scanning calorimetry (DSC) is a suitable technique to obtain the melting temperature (T _m) characteristic of surfactant bilayers, while fluorescence spectroscopy detects formation of surfactant aggregates, like bilayers. These two techniques were combined to investigate the assembly of DODAX molecules at micromolar concentrations, from 10 to 100 μM. At 1 mM surfactant, T _m ≈ 45 °C and 49 °C, respectively, for DODAB and DODAC. DSC and fluorescence of Nile Red were used to show the formation of DODAX aggregates, at the surfactant concentration as low as 10 μM, whose T _m decreases monotonically with increasing DODAX concentration to attain the value for the ordinary vesicles. The data indicate that these aggregates are organized as bilayer-like structures.     

Changes of iron concentrations in skin and plasma of patients with hemochromatosis along therapy

Skin as a manageable organ can provide direct or indirect information of tissue iron overload resulting from inherited disorders as hemochromatosis. Patients with hemochromatosis were evaluated at three consecutive phases along the therapy programme. Nuclear microprobe techniques were used to assess skin iron and Total Reflection X-ray Fluorescence to determine the plasma iron concentrations. Results showed that iron pools were differently correlated at the three therapy phases. These variations highlighted the value of skin iron content to assess organ iron deposition and therapy efficacy. Skin iron content can be used for a better management of patients with iron overload pathologies.     

Surface modification and characterization of thermoplastic polyurethane

This work reports the modification of thermoplastic polyurethanes (TPUs) in order to enlarge their application range, for example, as biomaterials by increasing its hydrophilicity.A TPU was successfully modified by using three different strategies: ultra-violet irradiation (UV), gamma irradiation (GI) and interfacial modification (IM). The results suggested the possibility of modifying the polyurethane-based surface either with poly(ethylene glycol) (PEG) or hydroxylethyl methacrylate (HEMA) or hexamethylene diamine (HMD) or chitosan (CT) by using any of these methods. The properties of the grafted PU were evaluated by surface, structural and thermal analysis. The results suggest that, among the methods studied in this work, the modification by gamma irradiation (GI) seems to be the most promising, since this method gives high values of grafting yield and has the advantage of providing a clean modification, meaning that no initiator is needed.     

Uncertainty in the determination of glucose in aqueous solutions by high‐performance liquid chromatography with evaporative light scattering detection

The determination of glucose and other carbohydrates is the most widespread chemical analysis that is performed within the industries of food, beverage, forage, biomass, pulp and paper, pharmaceuticals among others. Besides that, sugar refineries need to control their products, by‐products and effluents, and furthermore, glucose in the sucrose refining process, is considered an impurity, which shall be controlled. Being HPLC the most currently instrumental technique used for glucose analysis, the evaporative light scattering detector (ELSD) offers advantages (sensitivity, possibility for operating in gradient mode) over the also used refractive index detector. In this work, an HPLC‐ELSD methodology was optimised and validated, aiming the estimate of the uncertainty associated with the results at low levels of concentration of glucose to be measured. Linearity of the response was obtained in the range of glucose concentrations from 20 to 300 mg/L, with an analysis time of 10 min. The global uncertainty was estimated accordingly to the bottom‐up approach used by Eurachem. It was 13% on average for concentrations from 100 to 300 mg/L. For lower concentrations, uncertainty increased significantly up to 30% in the vicinity of the LOD of the method.