Determination of Low Contents of Fenpiverine Bromide by Extraction Spectrophotometry

An ion-pair extraction spectrophotometry method was developed for the determination of fenpiverine bromide in tablets. To determine this substance it was necessary to find experimental conditions that would allow eliminating the influence of other components of the tablets. Attention was paid to the fact that a suitable pH of water phase was necessary to achieve high selectivity.Received December 11, 2002; accepted April 24, 2003 Published online July 28, 2003     

Dynamic contact angle and spreading rate measurements for the characterization of the effect of dentin surface treatments

A new methodology capable of providing reliable and reproducible contact angle (theta) data has been employed to study the effect of clinical treatments grinding, acid etching, and deproteinization on medial dentin tissue. It is based on the application of the ADSA-CD algorithm to the determination of low-rate dynamic contact angles, obtained from slowly growing drops, and on contact angle measurement, as well as spreading behavior analysis, during the relaxation of the system (water on treated dentin) after initial drop growth. The theta data obtained were substantially more reproducible than those obtained with classical methods. A net effect of the treatment on theta was found, increasing dentin wettability: theta (polished) >theta (etched) >theta (deproteinized). The spreading rates correlate with the angles and are adequate for the dentin surface characterization. ANOVA and SNK tests show that for advancing contact angles the means corresponding to all treatments are significantly different. In the relaxing phase, mean angle and spreading rates on polished dentin differ significantly from those on etched and deproteinized dentin, but the latter do not differ significantly from each other.     

Volumetric Properties for the Electrolyte (NaCl,NaBr and NaI) Monosaccharide (D‐Mannose and D‐Ribose)‐Water Systems at 298.15 K

Densities have been measured for the electrolyte (NaCl, NaBr and NaI)‐monosaccharide (D ‐mannose and D‐ribose)‐water solutions at 298.15 K. These data have been used to calculate the apparent molar volumes of the saccharides (V_Φ,S) and electrolytes (V_Φ,E) in the studied solutions. Infinite dilution apparent molar volumes, V_Φ,S⁰ and V_Φ,E⁰, have been evaluated, together with the standard transfer volumes of the saccharides (Δ_tV_S⁰) from water to aqueous electrolyte solutions and those of the electrolytes (Δ_tV_E⁰) from water to aqueous saccharide solutions. It was shown that both the Δ_tV_S⁰ and Δ_tV_E⁰ values are positive and increase with increasing molalities of sodium halides and saccharides, respectively. Overall, the Δ_tV_S⁰ and Δ_tV_E⁰ values have the order of NaCl > NaBr > NaI except for NaI‐ribose and NaI‐ribose. Volumetric interaction parameters for the electrolyte‐monosaccharide pairs in water were obtained and interpreted by the stereochemistry of the monosaccharide molecules and the structural interaction model.     

An advantageous route to oxcarbazepine (trileptal) based on palladium-catalyzed arylations free of transmetallating agents

[reaction: see text] A new route to oxcarbazepine (Trileptal), the most widely prescribed antiepileptic drug, starting from commercially available 2'-aminoacetophenone and 1,2-dibromobenzene, is reported. The sequentially accomplished key steps are palladium-catalyzed intermolecular alpha-arylation of ketone enolates and intramolecular N-arylation reactions. After several experiments to establish the best conditions for both arylation processes, the target oxcarbazepine is obtained in a satisfactory overall yield, minimizing the number of steps and employing scalable catalytic procedures developed in partially aqueous media.     

Use of a continuous flow solid-phase spectroscopic sensor using two sensing zones: determination of thiamine and ascorbic acid

A simple, rapid, inexpensive, and automated flow-through solid-phase spectroscopic sensing device is proposed for the sequential determination of 2 vitamins: thiamine and ascorbic acid. The vitamins are concentrated on ion-exchange gels, thiamine on Sephadex SP C-25, and ascorbic acid on Sephadex QAE A-25; both solid supports are packed in 2 different flow cells. The absorbance is monitored directly on the solid phase with a double-beam spectrophotometer at 250 nm, without derivatization or additional elution. With the use of 2 carrier/self-eluting solutions (0.1 5M sodium acetate/acetic acid and 0.18M citric acid/K2HPO4) and a sample volume of 1000 microL, the sensor responds linearly in the range of 0.5-15 and 3-50 microg/mL with detection limits of 0.14 and 0.36 microg/mL for thiamine and ascorbic acid, respectively. When the method was applied to synthetic samples and pharmaceutical preparations, precise and accurate values were obtained.     

Alkylation of 2‐pyridinones: Synthesis of novel acyclonucleosides

This paper presents the synthesis of some novel acyclonucleosides containing 2‐pyridinones and 2‐hydroxyethoxymethyl, 2,3‐dihydroxy‐propyl side chain. The tosylate of these nucleosides analogues could be modified to azido derivatives. Also, acyclonucleosides with 1‐ethoxymethyl, 1‐benzyloxymethyl, 1‐methylthiomethy 1 and 2‐hydroxyethyl side chains have been investigated. The O‐alkylated pyridine derivatives were obtained during most reactions.     

Conformational and photophysical studies on porphyrin-containing donor-bridge-acceptor compounds. Charge separation in micellar nanoreactors

Photophysical studies with semi-rigid, 1, and flexible, 2, donor-bridge-acceptor (D-b-A2+) molecules with D a porphyrin and A2+ a methyl viologen moiety, were performed in neat polar solvents as well as included in surfactant (DTAB) aqueous and in reverse AOT/n-alkane micelles. The micelles acted as nanoreactors for the photoinduced electron transfer reaction upon laser excitation. In spite of the longer lifetime of the charge separated (CS) state in the semi-rigid tetrad 1(ca. 200 ns vs. ca. 100 ns for the flexible dyad 2), the CS formation quantum yield, for example in acetonitrile, was lower for the former (phi(CS) = 0.13) than for the latter (0.58). Comparison of the time-resolved fluorescence data in neat solvent and in the micelles yielded the phi(CS) values in the dilute micellar solutions. Application of laser-induced optoacoustic spectroscopy at various temperatures to 1 dissolved in a polar organic solvent (benzonitrile, BZN) included in aqueous DTAB nanoreactors afforded structural volume changes for the production in hundreds of ps of the CS state upon excitation of a polar molecule. The contraction during CS formation upon excitation of the collapsed conformer in BZN is attributed to the entering of solvent into the open molecular cavity. The opening upon formation of the CS state due to photoinduced electron transfer in the 1 collapsed conformation arises from the repulsion of the two positively charged ends in this state, as previously calculated. Inclusion of 1 in reverse AOT micelles in various n-alkanes also led to a contraction upon excitation, but the data had much more error due to the limited range of variability of the ratio of thermoelastic parameters. The data obtained with the more flexible "supermolecule" 2 showed the predicted large conformation flexibility of these molecules.     

Radionuclide X-ray fluorescence analysis of drinking water using preconcentration of trace metals on chelating cellulose exchanger OSTSORB-OXIN

Determination of Cr, Fe, Cu, Zn and Pb in drinking water preconcentrated on a chelating ion exchanger of Czechoslovak production is described. The analytical system consisted of a radionuclide source²³⁸Pu, a Si/Li semiconductor detector and a multichannel analyzer. Results are compared with trehshold limit values recommended for drinking water.     

One-pot enantioselective formation of eight-membered rings from alkenyl Fischer carbene complexes and ketone enolates

Eight-membered carbocycles with up to five new stereogenic centers are enantioselectively obtained following a one-pot procedure that involves the coupling of three components: an alkenyl Fischer carbene complex, a ketone enolate, and allyl lithium.     

Enzymatic bleaching of organosolv sugarcane bagasse pulps with recombinant xylanase of the fungus Humicola grisea and with commercial cartazyme HS xylanase

Organosolv (ethanol/water and acetosolv) pulps were treated with Humicola grisea var. thermoidea and compared with Cartazyme HS xylanase-treated pulp. The ethanol/water pulps treated with H. grisea had the same viscosity as unbleached pulps (8 cP). Ethanol/water pulps treated with Cartazyme had higher viscosity than H. grisea-treated pulps (12 cP). Acetosolv pulps treated with H. grisea and Cartazyme presented a reduction in viscosity; however, the pulps treated with H. grisea had a lower reduction in viscosity than Cartazyme-treated pulps. Ethanol/water pulps treated with H. grisea had a 23% reduction in kappa number in 4 and 8 h of treatment, compared with the unbleached pulps. Cartazyme-treated pulps had a kappa number similar to that of the control pulps for 4 h of treatment. Extending the treatment time to 12 h resulted in a reduction of 33%. The acetosolv pulp treated with H. grisea had a kappa number reduced to 23% in 4 h. Cartazyme treatment resulted in a reduction of 55 and 44% in kappa number for 4 and 8 h of treatment, respectively, when compared with control pulp. Extending the treatment time to 12 h decreased the kappa number 72%. Fourier transform infrared spectra and principal component analysis showed differences among unbleached, H. grisea-treated, and Cartazyme-treated pulps.