3,5‐Dimethyl‐4‐[(E)‐(2‐nitrophenyl)diazenyl]‐1‐(2,3,4,5,6‐pentafluorophenyl)‐1H‐pyrazole

The title compound, C₁₇H₁₀F₅N₅O₂, is described and compared with its 4‐nitrophenyl isomer [Bustos, Sánchez, Schott, Alvarez‐Thon & Fuentealba (2007). Acta Cryst. E 63 , o1138–o1139]. The title molecule presents its nitro group split into two rotationally disordered components, which in conjunction with the rotation of the `unclamped' rings constitute the main molecular differences. Packing is directed by a head‐to‐tail type `I' C—F...F—C interaction, generating double‐chain strips running along [100]. These substructures are interlinked by a variety of weak F...F, O...F, F...π and O...π interactions.     

Knowledge‐based choice of the initiator type for monomer removal by postpolymerization

The mechanisms involved in monomer removal by postpolymerization were investigated to establish a criterion to select the most effective initiator systems. Three redox systems yielding radicals of different hydrophobicities were studied. Efficiency in monomer removal by postpolymerization increased with the hydrophobicity of the radical formed from the initiator system. This result was independent of the water solubility of the residual monomer. The mechanistic reasons for this finding are discussed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4245–4249, 2002     

Ion‐Transfer Electrochemistry of Rat Amylin at the Water–Organogel Microinterface Array and Its Selective Detection in a Protein Mixture

The behavior of proteins and polypeptides at electrified aqueous–organic interfaces is of benefit in label‐free detection strategies. In this work, rat amylin (or islet amyloid polypeptide) was studied at the interface formed between aqueous liquid and gelled organic phases. Amylin is a polypeptide that is co‐secreted with insulin from islet beta‐cells and is implicated in fibril formation. In this study, rat amylin was used, which does not undergo aggregation. The polypeptide underwent an interfacial transfer process, from water to the gelled organic phase, under applied potential stimulation. Cyclic voltammetry revealed steady‐state forward and peak‐shaped reverse voltammograms, which were consistent with diffusion‐controlled water‐to‐organic transfer and thin‐film stripping or desorptive back‐transfer. The diffusion‐controlled forward current was greater when amylin was present in an acidic aqueous phase than when it was present in an aqueous phase at physiological pH; this reflects the greater charge on the polypeptide under acidic conditions. The amylin transfer current was concentration dependent over the range 2–10 μM , at both acidic and physiological pH. At physiological pH, amylin was selectively detected in the presence of a protein mixture, which illustrated the bioanalytical possibilities for this electrochemical behavior.     

The Antiepileptic Lamotrigine and Its Analogues: Comparative Theoretical Electronic Properties

Electronic properties of lamotrigine (LTG) and two analogues (A1 and A2) are compared through MOPAC-AM1 calculations. Two stable conformers of LTG are calculated to exist in agreement with X-ray crystallography. In the three compounds and the two conformers for each of them, the more favorable protonation sites are N₂ and N₄; these should then be the sites appropriate for interaction with a receptor, and group valence reinforces the supposition. The molecular electrostatic potentials show that a region between the two chlorine atoms in LTG could be the site for an electrostatic interaction with a corresponding site in the receptor. The fluorine atom in A1 would play an equivalent role. A simple model for LTG-receptor interaction is proposed.     

Synthesis of novel polyaryl(ether–ketones) with tert-butyl pendent groups

Linear polyaryl(ether ketones) containing tert-butyl pendent groups were prepared from aromatic hydrocarbons and aromatic diacid chlorides, both classes of monomers containing tert-butyl pendent groups. The polymers were prepared in high yield and high molecular weight by low-temperature precipitation polycondensation in 1,2-dichloroethane. The presence of meta-oriented moieties and bulky pendent groups played a beneficial role with regard to solubility, while the thermal transitions and thermal resistance were not greatly impaired relative to conventional all para-oriented polyaryl(ether–ketones). The current polyaryl(ether–ketones) showed glass transition temperatures in the range 170–240°C and decomposition temperatures, as measured by TGA, of about 500°C. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1251–1256, 1998     

In situ disorder-order transformation in synthetic gallosilicate zeolites with the NAT topology

Here, we report that synthetic gallosilicate molecular sieves with the NAT topology and Si/Ga ratios close to but slightly higher than 1.50 undergo an in situ transformation under their crystallization conditions. The materials have been studied ex situ by using powder X-ray diffraction, elemental and thermal analyses, and multinuclear MAS NMR. The transformation is characterized by a change in the distribution of Si and Ga of the NAT framework, from a quite (but not completely) disordered phase to a very highly (but not completely) ordered one, accompanied by a change from tetragonal to orthorhombic symmetry. During most of the solution-mediated transformation, no noticeable signs of fresh precipitation, phase segregation, or changes in the chemical composition are detected. Intermediate materials show variations in the degree of Si-Ga ordering and orthorhombic distortion and are not physical mixtures of the disordered and ordered phases. Ab initio calculations strongly suggest a preferential siting of Si in the tetrahedral sites involved in a smaller number of 4-rings in the NAT topology (i.e., the low multiplicity site). The cost of violations of Loewenstein's rule has also been calculated. For this topology and chemical composition the preferential siting and Loewenstein's rule drive together the system to the ordered configuration. A Monte Carlo sampling procedure affords a reasonable model for the initial, mainly disordered state, which fits well within the experimental disorder-order series.     

Evaluation of tocopherol recovery through simulation of molecular distillation process

DISMOL simulator was used to determine the best possible operating conditions to guide, in future studies, experimental works. This simulator needs several physical-chemical properties and often it is very difficult to determine them because of the complexity of the involved components. Their determinations must be made through correlations and/or predictions, in order to characterize the system and calculate it. The first try is to have simulation results of a system that later can be validated with experimental data. To implement, in the simulator, the necessary parameters of complex systems is a difficult task. In this work, we aimed to determe these properties in order to evaluate the tocopherol (vitamin E) recovery using a DISMOL simulator. The raw material used was the crude deodorizer distillate of soya oil. With this procedure, it is possible to determine the best operating conditions for experimental works and to evaluated the process in the separation of new systems, analyzing the profiles obtained from these simulations for the falling film molecular distillator.     

Proton induced P-H and Mo-H bond activation at the phosphide bridged dimolybdenum complexes [Mo2Cp2(mu-H)(mu-PHR)(CO)4](R = Cy, 2,4,6-C6H2R'3; R'= H, Me, tBu)

The new hydride complexes [Mo2Cp2(mu-H)(mu-PHR)(CO)4] having bulky substituents (R = 2,4,6-C(6)H2tBu3= Mes*, R = 2,4,6-C6H2Me3= Mes) have been prepared in good yield by addition of Li[PHR] to the triply bonded [Mo2Cp2(CO)4] and further protonation of the resulting anionic phosphide complex [Mo2Cp2(mu-PHR)(CO)4]-. Protonation of the Mes* compound with either [H(OEt2)2][B{3,5-C6H3(CF3)2}4] or HBF4.OEt2 gives the cationic phosphinidene complex [Mo2Cp2(mu-H)(mu-PMes*)(CO)4]+ in high yield. In contrast, protonation of the analogous hydride compounds with Mes or Cy substituents on phosphorus give the corresponding unsaturated tetracarbonyls [Mo2Cp2(mu-PHR)(CO)4]+, which are unstable at room temperature and display a cis geometry. Decomposition of the latter give the electron-precise pentacarbonyls [Mo2Cp2(mu-PHR)(mu-CO)(CO)4]+, also displaying a cis arrangement of the metal fragments. In the presence of BF4- as external anion, fluoride abstraction competes with carbonylation to yield the neutral fluorophosphide hydrides [Mo2Cp2(mu-H)(mu-PFR)(CO)4]. Similar results were obtained in the protonation reactions of the hydride compounds having a Ph substituent on phosphorus. In that case, using HCl as protonation reagent gave the chloro-complex [Mo2ClCp2(mu-PHPh)(CO)4] in good yield. The structures and dynamic behaviour of the new compounds are analyzed on the basis of solution IR and 1H, 31P, 19F and 13C NMR data as well as the X-ray studies carried out on [Mo2Cp2(mu-H)(mu-PHMes)(CO)4](cis isomer), [Mo2Cp2(mu-H)(mu-PFMes)(CO)4](trans isomer), [Mo2Cp2(mu-PHCy)(mu-CO)(CO)4](BF4) and [Mo2ClCp2(mu-PHPh)(CO)4].     

Complex emulsion inversion pattern associated with the partitioning of nonionic surfactant mixtures in the presence of alcohol cosurfactant

Commercial ethoxylated nonionic surfactant mixtures containing alcohol cosurfactant exhibit a three-phase behavior whose formulation strongly varies with the water/oil ratio. As a consequence, a change in water/oil ratio can result in a sequence of up to three different emulsion inversion processes, through a combination of formulation and composition effects.     

A pyrimidine thiolate Rh(I) complex: structure, bonding and one-dimensional interactions in solid and in solution

The reaction of [Rh(micro-Cl)(COD)]2 with 4,6-dimethyl-pyrimidinethiolate (Me2-pymt) and subsequent substitution of COD by CO yields [Rh(Me2-pymt)(CO)2]. The stacking pattern found in this compound is in contradiction with previously studied comparable square-planar complexes of type d8-[M(chelate)(monodentate)2] in which each ligand has different pi-acidic character. A theoretical study of the intermolecular interactions and conformation of the title compound has been carried out, combining semi-empirical band calculations on the real chains and ab initio(MP2 level) calculations on a model dimer. The combination of electronic and steric effects determines the rotation of the successive monomers and the deviation from linearity of the one-dimensional stacks. Its behaviour in solution is also special, developing a blue colour and forming micelles, when adding water to acetone solutions.