Soft-landing of peptides onto self-assembled monolayer surfaces

Mass-selected peptide ions produced by electrospray ionization were deposited as ions by soft-landing (SL) onto fluorinated and hydrogenated self-assembled monolayer (FSAM and HSAM) surfaces using a Fourier transform ion cyclotron resonance mass spectrometer (FT-ICR MS) specially designed for studying collisions of large ions with surfaces. Analysis of modified surfaces was performed in situ by combining 2 keV Cs(+) secondary ion mass spectrometry with FT-ICR detection of the sputtered ions (FT-ICR-SIMS). Similar SIMS spectra obtained following SL at different collision energies indicate that peptide fragmentation occurred in the analysis step (SIMS) rather than during ion deposition. The effect of the surface on SL was studied by comparing the efficiencies of SL on gold, FSAM, HSAM, and COOH-terminated SAM surfaces. It was found that FSAM surfaces are more efficient in retaining ions than their HSAM analogues, consistent with their larger polarizability. The efficiency of soft-landing of different peptides on the FSAM surface increases with the charge state of the ion, also consistent with an ion-polarizable molecule model for the initial stage of soft-landing on SAM surfaces. The gradual decrease of peptide ion deposition efficiency with an increase in collision energy found experimentally was quantitatively rationalized using the hard-cube model.     

Theoretical study of the conformational energy hypersurface of cyclotrisarcosyl

The multidimensional Conformational Potential Energy Hypersurface (PEHS) of cyclotrisarcosyl was comprehensively investigated at the DFT (B3LYP/6-31G(d), B3LYP/6-31G(d,p) and B3LYP/6-311++G(d,p)), levels of theory. The equilibrium structures, their relative stability, and the Transition State (TS) structures involved in the conformational interconversion pathways were analyzed. Aug-cc-pVTZ//B3LYP/6-311++G(d,p) and MP2/6-31G(d)//B3LYP/6-311++G(d,p) single point calculations predict a symmetric cis-cis-cis crown conformation as the energetically preferred form for this compound, which is in agreement with the experimental data. The conformational interconversion between the global minimum and the twist form requires 20.88 kcal mol-1 at the MP2/6-31G(d)//B3LYP/6-311++G(d,p) level of theory. Our results allow us to form a concise idea about the internal intricacies of the PEHSs of this cyclic tripeptide, describing the conformations as well as the conformational interconversion processes in this hypersurface. In addition, a comparative analysis between the conformational behaviors of cyclotrisarcosyl with that previously reported for cyclotriglycine was carried out     

Magnetic properties of cyano-bridged Ln3+-M3+ complexes. Part I: trinuclear complexes (Ln3+ = La, Ce, Pr, Nd, Sm; M3+ = FeLS, Co) with bpy as blocking ligand

The reaction of Ln(NO3)3(aq) with K3[Fe(CN)6] or K3[Co(CN)6] and 2,2'-bipyridine in water/ethanol led to eight trinuclear complexes: trans-[M(CN)4(mu-CN)2{Ln(H2O)4(bpy)2}2][M(CN)6].8H2O (M = Fe3+ or Co3+, Ln = La3+, Ce3+, Pr3+, Nd3+, and Sm3+). The structures for the eight complexes [La2Fe] (1), [Ce2Fe] (2), [Pr2Fe] (3), [Nd2Fe] (4), [Ce2Co] (5), [Pr2Co] (6), [Nd2Co] (7), and [Sm2Co] (8) have been solved; they crystallize in the triclinic space group P and are isomorphous. They exhibit a supramolecular 3D architecture through hydrogen bonding and pi-pi stacking interactions. A stereochemical study of the nine-vertex polyhedra of the lanthanide ions, based on continuous shape measures, is presented. No significant magnetic interaction was found between the lanthanide(III) and the iron(III) ions.     

Compositional changes in lime-based mortars exposed to different environments

Specimens of aerial and hydraulic lime-based mortars to be used in restoration works were prepared, hardened and subjected to different environments to study their compositional changes during setting, hardening and exposure to environment. Outside exposure, weathering cycles in a climatic chamber, SO₂-rich environment and indoor exposure (as control group) were selected to expose the mortars. XRD, FT-IR and TG-DTA analyses were performed at 7, 14, 21 and 28 days to determine the chemical and mineralogical composition, as well as the formation of the degradation products. Outside and SO₂-chamber exposures and increasing the relative humidity allowed faster carbonation (enhancing CO_2(g) dissolution) and hydration of hydraulic compounds. In SO₂-chamber, sulfate attack appears as a surface phenomenon, giving: gypsum in aerial specimens and gypsum and syngenite in hydraulic specimens.     

Relaxation response of polymers containing highly flexible side groups monitored by broadband dielectric spectroscopy

The relaxation behavior of poly(5-acryloxymethyl-5-methyl-1,3-dioxacyclohexane), a polymer containing highly flexible side groups, is studied by broadband dielectric spectroscopy in the frequency and temperature ranges 10(-1)-10(9) Hz and 123-473 K, respectively. Above the glass transition temperature T(g) the dielectric loss in the frequency domain exhibits a prominent alpha absorption, followed in increasing order of frequencies by two secondary absorptions called beta and gamma. At temperatures slightly higher than T(g), the a relaxation is well separated from the beta, but as temperature increases overlapping between both relaxations augments forming an alphabeta absorption in the vicinity of 420 K. This latter absorption displays a shoulder on its high-frequency side corresponding to the y relaxation. The strength of the a relaxation decreases with increasing temperature, eventually vanishing at the temperature at which the alphabeta absorption is formed. The time retardation spectra of the isotherms are calculated and further used to facilitate the deconvolution of the overlapping relaxations. The fact that the temperature dependence of the beta relaxation also describes that of the alphabeta absorption suggests that both relaxations have the same nature. It seems that as temperature increases, the a relaxation feeds on the beta absorption until its complete disappearance. The gamma relaxation, in turn, seems to increase at the expense of the alphabeta process at high temperature.     

Molecular structure-dynamics relationships in glassy poly(isophthalamide)s as revealed by wide angle x-ray scattering, dielectric loss spectroscopy, and molecular modelling

The effect of molecular structure on the gamma relaxation dynamics has been studied in a set of aromatic poly(isophthalamide)s. This polymer family differ in the bridge group between phenylene rings [hexafluoroisopropylidene (C(CF(3))(2)) or ether] and also in the presence of t-butyl groups (C(CH(3))(3)) as pendant substituent on the five position of isophthalic ring. The results obtained from wide angle x-ray scattering in the glassy state indicated that both (C(CF(3))(2)) and (C(CH(3))(3)) groups favor the separation between chains, which is reflected on different interchain average distances. Dielectric experiments showed that both bulky groups favor the mobility in the glassy state. Molecular modelling methods were used to know the kind of molecular motions associated to the dielectric relaxation observed below the glass transition temperature.     

Multiphoton reactive surfaces using ruthenium(II) photocleavable cages

Photoreactive surfaces derived from a new photocleavable surface modification agent and with photosensitivity in the Vis and IR region are described. A ruthenium(II) caged aminosilane, [Ru(bpy)(2)(PMe(3))(APTS)](PF(6))(2), was synthesized and attached to silica surfaces. Light irradiation removed the cage and generated surface patterns with reactive amine groups. The photosensitivity of this compound under single (460 nm) and two-photon (900) excitation is demonstrated. Functional patterns with site-selective attachment of other molecular species are described.     

Stable N-heterocyclic carbene (NHC)-palladium(0) complexes as active catalysts for olefin cyclopropanation reactions with ethyl diazoacetate

The Pd(0) complexes [(NHC)PdL(n)] (NHC=N-heterocyclic carbene ligand; L=styrene for n=2 or PR(3) for n=1) efficiently catalyse olefin cyclopropanation by using ethyl diazoacetate (EDA) as the carbene source with activities that improve on previously described catalytic systems based on this metal. Mechanistic studies have shown that all of these catalyst precursors deliver the same catalytic species in solution, that is, [(IPr)Pd(sty)], a 14e(-) unsaturated intermediate that further reacts with EDA to afford [(IPr)Pd(=CHCO(2)Et)(sty)], from which the cyclopropane is formed.     

Regioselective cobalt-catalyzed addition of sulfides to unactivated alkenes

A novel method to synthesize tertiary alkyl/aryl sulfides in a mild and regioselective manner from unactivated alkenes using cobalt catalysis is described. The methodology is compatible with sensitive functionalities and is successful with several different types of alkenes and sulfides.