PREPARATION OF MICROPOROUS ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE (UHMWPE) BY THERMALLY INDUCED PHASE SEPARATION OF A UHMWPE/LIQUID PARAFFIN MIXTURE

Ultra-high molecular weight polyethylene (UHMWPE) with a microporous structure was prepared via thermally induced phase separation (TIPS).Liquid paraffin (LP) was used as a diluent in the preparation of microporous UHMWPE. Small angle laser light scattering (SALLS) and differential scanning calorimetry (DSC) were used to determine the phase separation temperatures,i.e.the cloud points and the dynamic crystallization temperatures,respectively.It was found that the cloudI points were coincident with the cr...     

Urinary excretion study of coenzyme Q10 in rats by ultra-performance liquid chromatography-mass spectrometry

A method based on ultra-performance liquid chromatography mass spectrometry (UPLC-MS) applying atmospheric pressure chemical ionization in the positive ion mode is developed for the determination of coenzyme Q10 (CoQ10) in rat urine. The assay involves the extraction of crude urine, fast liquid chromatography on a Waters Acquity UPLC BEH C18 column (1.7 microm, 1.0 x 50 mm), and selected ion monitoring detection using mass transition. The calibration range is found to be 0.05-25 microg/mL, with the lower limit of quantitation of 0.05 microg/mL. Intra- and inter-day precision (relative standard deviation) for CoQ10 in rat urine range from 0.7% to 15%, and accuracy expressed in recovery rates in urine is between 83% and 118%. The recovery of this method is found to be between 80% and 95% at three concentrations. The total cumulative recovery of CoQ10 is 1.16 +/- 1.05% (percentage of dose intake, n = 4) from rat urine collected over 30 h after oral administration of the drug. The UPLC-MS method described allows the quick determination of CoQ10 in rat urine with good precision and accuracy. It is suitable for further excretion studies of CoQ10 in animals.     

An expedient synthesis of the fibril binding compound FSB via sequential Pd-catalyzed coupling reactions

The styryl benzene derivative (E, E)-1-fluoro-2,5-bis(3-hydroxycarbonyl-4-hydroxy)styrylbenzene (FSB), well-known for its binding to beta-amyloid peptide fibrils, was synthesized in an efficient manner exploiting two sequential palladium(0)-catalyzed coupling reactions in a 34% overall yield. This is a substantial improvement to the previously reported synthesis of FSB in 1.1%.     

Nortriterpenoids from Schisandra wilsoniana

Three new highly oxygenated nortriterpenoids, wilsonianadilactones A–C ( 1 – 3 ), together with twelve known ones, i.e., 4 – 15 , were isolated from the leaves and stems of Schisandra wilsoniana. Their structures were established by means of extensive analysis of spectroscopic data, and compound 1 was further confirmed by X‐ray crystallographic diffraction. Compounds 1 – 3 showed weak anti‐HIV‐1 activity with EC₅₀ values of 23.5, 55.5, and 66.4 μg/ml, respectively.     

Secretory phospholipase A2 hydrolysis of phospholipid analogues is dependent on water accessibility to the active site

A new and unnatural type of phospholipids with the head group attached to the 2-position of the glycerol backbone has been synthesized and shown to be a good substrate for secretory phospholipase A2 (sPLA2). To investigate the unexpected sPLA2 activity, we have compared three different phospholipids by using fluorescence techniques and HPLC, namely: (R)-1,2-dipalmitoyl-glycero-3-phosphocholine (hereafter referred to as 1R), (R)-1-O-hexadecyl-2-palmitoyl-glycero-3-phoshocholine (2R), and (S)-1-O-hexadecyl-3-palmitoyl-glycero-2-phosphocholine (3S). Furthermore, to understand the underlying mechanisms for the observed differences, we have performed molecular dynamics simulations to clarify on a structural level the substrate specificity of sPLA2 toward phospholipid analogues with their head groups in the 2-position of the glycerol backbone. We have studied the lipids above 1R, 2R, and 3S as well as their enantiomers 1S, 2S, and 3R. In the simulations of sPLA2-1S and sPLA2-3R, structural distortion in the binding cleft induced by the phospholipids showed that these are not substrates for sPLA2. In the case of the phospholipids 1R, 2R, and 3S, our simulations revealed that the difference observed experimentally in sPLA2 activity might be caused by reduced access of water molecules to the active site. We have monitored the number of water molecules that enter the active site region for the different sPLA2-phospholipid complexes and found that the probability of a water molecule reaching the correct position such that hydrolysis can occur is reduced for the unnatural lipids. The relative water count follows 1R > 2R > 3S. This is in good agreement with experimental data that indicate the same trend for sPLA2 activity: 1R > 2R > 3S.     

N,N,N-Trimethylchitosan chloride as a gene vector: synthesis and application

N,N,N-Trimethylchitosan chloride with different degrees of quaternization has been synthesized and characterized by (1)H NMR spectroscopy. The particle size ranges from 150 to 600 nm, which is dependent on the N/P ratio and is less influenced by the degree of quaternization. The majority of the particles have a spherical morphology. The zeta potential of the particles increases with the N/P ratio and the quaternization degree of TMC. Short-term contact experiments show good biocompatibility of TMC, but long-term contact experiments reveal its high toxicity. This study suggests that TMC is a promising gene carrier, but further modification is still required to improve its cytocompatibility.     

Comparison of chromatographic ion-exchange resins VI. Weak anion-exchange resins

A comparative study on weak anion exchangers was performed to investigate the pH dependence, binding strength, particle size distribution, and static and dynamic capacity of the chromatographic resins. The resins tested included: DEAE Sepharose FF, Poros 50 D, Fractogel EMD DEAE (M), MacroPrep DEAE Support, DEAE Ceramic HyperD 20, and Toyopearl DEAE 650 M. Testing was performed with five different model proteins: Anti-FVII mAb (immunoglobulin G), aprotinin, bovine serum albumin (BSA), Lipolase (Novozymes), and myoglobin. Retention showed an expected increasing trend as a function of pH for proteins with low pI. A decrease in retention was observed for some resins at pH 9 likely due to initiation of deprotonation of the weak anion-exchange ligands. Expected particle size distribution was obtained for all resins compared to previous studies. Binding strength to weak anion-exchange resins as a function of ionic strength depends on the specific protein. Binding and elution at low salt concentration may be performed with Toyopearl DEAE 650 M, while binding and elution at high salt concentration may be performed with MacroPrep DEAE Support. Highest binding capacities were generally obtained with Poros 50 D followed by DEAE Ceramic HyperD 20. A general good agreement was obtained between this study and data obtained by the suppliers. Verification of binding strength trends with model proteins was achieved with human growth hormone (hGH) and a hGH variant on the same resins with different elution salts, sodium chloride, sodium hydrogenphosphate, sodium sulphate, and sodium acetate. Static capacity measurements obtained in the traditional experimental set-up were compared with high-throughput screening (HTS) technique experiments with reasonable agreement. Isotherm data obtained from HTS techniques and pulse experiments were successfully combined with mathematical modelling to simulate, develop and optimise the separation process of two model proteins, Lipolase and BSA. The data presented in this paper may be used for selection of resins for testing in process development.     

Synthesis and aqueous solution properties of sterically stabilized pH-responsive polyampholyte microgels

Emulsion copolymerization of poly(methacrylic acid) and poly(2-(diethylamino)ethyl methacrylate) (PMAA/PDEA) yielded pH-responsive polyampholyte microgels of 200-300 nm in diameter. These microgels showed enhanced hydrophilic behavior in aqueous medium at low and high pH, but formed large aggregates of approximately 2500 nm at intermediate pH. To achieve colloidal stability at intermediate pH, a second batch of microgels of identical monomer composition were synthesized, where monomethoxy-capped poly(ethylene glycol)methacrylate (PEGMA) was grafted onto the surface of these particles. Dynamic light-scattering measurements showed that the hydrodynamic radius, Rh, of sterically stabilized microgels was approximately 100 nm at intermediate pH and increased to 120 and 200 nm at pH 2 and 10, respectively. Between pH 4 and 6, these microgels possessed mobility close to zero and a negative second virial coefficient, A2, due to overall charge neutralization near the isoelectric pH. From the Rh, mobility, and A2, cross-linked MAA-DEA microgels with and without PEGMA retained their polyampholytic properties in solution. By varying the composition of MAA and DEA in the microgel, it is possible to vary the isoelectric point of the colloidal particles. These new microgels are being explored for use in the delivery of DNA and proteins.     

脉管制冷与气波制冷耦合的研究

介绍了一种耦合脉管制冷与气波制冷技术的新型制冷机脉管式气波制冷机。分析了脉管式气波制冷机的制冷原理 ,对脉管制冷与气波制冷的耦合性进行了试验研究。同时 ,对振荡管长度、气体分配器的转速等影响脉管式气波制冷机性能的因素进行了试验。通过研究 ,获得了一些有益的结论 ,并给出了各种因素对制冷机等熵效率的影响曲线     

一神非定常振荡流的稳定性分析

本文分析了一种非定常振荡的不稳定性问题.其特点是.应用偏微分方程特征理论以及O-S方程特征值的展开,求解扰动波的相函数而不是预先给定扰动波的波动形式.本文研究平面Poiseuille流与其垂向振荡流的组合流动系统.对于连续振荡源导致的波包演化,该系统存在不稳定性.