Über Reaktionen von Nitrosophenolen, 3. Mitt.: Reaktion von 2-Nitroso-1-naphthol mit Resorcin und Orcin

Zusammenfassung Die Reaktion von 2-Nitroso-1-naphthol mit Resorcin bzw. Orcin in Äther bei Anwesenheit von HNO₃ liefert Benzo[c]phenoxazon-(9) (I), Benzo[c]phenoxazon-(9)-12-oxid (II), Methyl-benzo[c]phenoxazon-(9) (III) sowie 11-Methyl-benzo[c]phenoxazon-(9)-12-oxid (IV). Die Struktur der isolierten Substanzen wurde durch Reduktion mittels TiCl₃ sowie durch die UV- und IR-Spektren gestützt.

---

The reaction of 2-nitroso-1-naphthol with resorcinol and orcinol in ether solution in the presence of nitric acid has been studied. From the reaction mixture the benzophenoxazones I–IV have been isolated. Structures were assigned on the grounds of UV and IR spectra and partly by using TiCl₃ as a reducing agent.

---

---

Mit 1 Abbildung     

Selective 1,4-reduction of unsaturated carbonyl compounds using Co2(CO)8-H2O

α,β-Unsaturated ketones and aldehydes were selectively reduced to the corresponding saturated carbonyl compounds by Co₂(CO)₈-H₂O system. The current reducing system also offered a chemoselective reduction of less substituted unsaturated carbonyl groups.     

Stereoselektive Synthese einiger Amidester der (±)-erythro-2,3-Diphenylglutarsäure

Zusammenfassung Bei der Umsetzung von Methylphenylacetat mit Dialkylamiden der Zimtsäure in Gegenwart von NaNH₂ wurden Amidester der (±)-erythro-2,3-Diphenylglutarsäure hergestellt. Die Konfiguration der erhaltenen Verbindungen wurde durch Hydrolyse mit HCl (1:1) zu der entsprechenden Säure und im Falle der Umsetzung mit dem Zimtsäuredimethylamid durch eine mehrstufige Synthese aus demerythro-Säurenitril-ester festgestellt. Es wurden auch Bedingungen gefunden, unter welchen nur die Estergruppe hydrolysiert werden kann, wobei Mono-dimethylamid entsteht, das mit CH₂N₂ den Ausgangs-Amidester liefert.     

Phase transitions in ternary caesium lead bromide

Phase transitions in ternary caesium lead bromide (CsPbBr₃) were studied by means of DSC, TMA and high temperature X-ray diffraction. The samples were prepared from the solution by water evaporation and from the melt. on the DSC curves as well as on the temperature dependence of the lattice constants of CsPbBr₃ only two effects were found belonging to the earlier published phase transitions at 88 and 130°C and no further effects. Linear thermal expansion coefficient α of individual CsPbBr₃ modifications were calculated from both TMA and high temperature X-ray diffraction. The structural parameters of the room temperature orthorhombic phase were refined and the results are presented. CsPbBr₃ prepared from the solution contained about 10% of CsPb₂Br₅ and so the DSC curve of pure CsPb₂Br₅ was also measured and an effect at a temperature of 68.5°C was found. This revised version was published online in July 2006 with corrections to the Cover Date.     

Zur komplexometrischen Bestimmung des Natriums

Zusammenfassung Bei der Titration von Zink aus dem Niederschlag von Natrium-Zinkuranylacetat wird statt des früher vorgeschlagenen Indikators Eriochromschwarz T der Indikator Dithizon verwendet. Dadurch wird auch bei Titrationen mit 0,001-m Lösungen ein scharfer Umschlag erzielt.

---

Summary Dithizone is used in place of Eriochrome black T previously suggested as indicator in the titration of zinc contained in the precipitate of sodium-zinc-uranyl acetate. A sharper change is thus observed even with 0.001M solutions.

---

Résumé Lors du titrage du zinc dans le précipité d'acétate d'uranyle de zinc et de sodium, les auteurs emploient comme indicateur la dithizone au lieu du Noir Eriochrome T qui avait été précédemment recommandé. Il est ainsi possible d'obtenir un virage très net, même pour des titrages effectués avec des solutions 0,001M.

     

On the expansion of hole in main chain polymers determined by positron annihilation

The temperature dependence of positron annihilation characteristics, ₃ andI ₃, has been studied on sample of poly(butadiene), poly(isobutylene) and poly(chloroprene). The temperature range was between 15 and 470 K. The rate of expansion of holes or free-volume in all samples was deduced belowT _g as well aboveT _g as appr. 3·10^–3 K^–1 and 2·10^–2 K^–1, respectively. These values are very close to the rate of the mean squared displacement of scatterer<r ²>observed in neutron scattering experiments. A possibility to use an inverse value of free-volume,V _f ^–1 for study of viscoelastic state of polymers is demonstrated.     

The luminescence efficiency of YAG: Ce phosphors

The luminescence intensity of Yttrium aluminium garnet activated by the Ce³⁺ (YAGCe³⁺) under cathode-ray excitation depends on the preparation method and content of some dopants. Samples containing Fe, Pt, Ir or some colour centre, respectively, show relatively low luminescence. The maximum luminescence intensity was obtained with the Czochralski method grown single crystals in 98% Ar+2% H₂ atmosphere which were sensitized by oxygen annealing followed by treatment at 1500 °C in molybdenum container using a wet hydrogen atmosphere.     

Dual‐Amplification of Antigen–Antibody Interactions via Backfilling Gold Nanoparticles on (3‐Mercaptopropyl) Trimethoxysilane Sol‐Gel Functionalized Interface

A new dual‐amplification strategy of electrochemical signaling from antigen–antibody interactions was proposed via backfilling gold nanoparticles on (3‐mercaptopropyl) trimethoxysilane sol‐gel (MPTS) functionalized interface. The MPTS was employed not only as a building block for the electrode surface modification but also as a matrix for ligand functionalization with first amplification. The second signal amplification strategy introduced in this study was based on the backfilling immobilization of nanogold particles to the immunosensor surface. Several coupling techniques, such as with nanogold but not MPTS or with MPTS but not nanogold, were investigated for the determination of carcinoembryonic antigen (CEA) as a model, and a very good result was obtained with nanogold and MPTS coupling immunosensor. With the noncompetitive format, the formation of the antigen–antibody complex by a simple one‐step immunoreaction between the immobilized anti‐CEA and CEA in sample solution introduced membrane potential change before and after the antigen–antibody interaction. Under optimal conditions, the proposed immunosensor exhibited a good electrochemical behavior to CEA in a dynamic concentration range of 4.4 to 85.7 ng/mL with a detection limit of 1.2 ng/mL (at 3 δ). Moreover, the precision, reproducibility and stability of the as‐prepared immunosensor were acceptable. Importantly, the proposed methodology would be valuable for diagnosis and monitoring of carcinoma and its metastasis.     

The relationship between the structures of Cu(II) complexes and their chemical transformations

The paper presents the results of a study of M ₂ ^I M ^II(SO₄)₂ compounds withM ^I= K, Rb, Cs or Tl, andM ^II=Cu or Ni, in the interval from room temperature to the melting temperature. All the compounds studied show endo- or exothermic excursions in their DTA curves, corresponding to phase transitions connected with colour changes of the compounds. For M ₂ ^I Cu(SO₄)₂, whereM ^I is K or Tl, several modifications could be prepared at laboratory temperature, probably distortion isomers. No modifications of this type could be prepared, however, for M ₂ ^I Ni(SO₄)₂ compounds.

---

Zusammenfassung Die Ergebnisse einer Untersuchung von M ₂ ^I M ^II(SO₄)₂-Verbindungen Cs, Tl;M ^II=Cu, Ni) im Temperaturbereich von Raum- bis Schmelztemperatur werden beschrieben. Alle untersuchten Verbindungen zeigen in ihren DTA-Kurven mit Farbänderungen einhergehende, durch Phasenumwandlungen bedingte endo- und exotherme Peaks. Bei Laboratoriumstemperatur konnten verschiedene Modifikationen von M ₂ ^I Cu(SO₄)₂ (mitM ^I gleich K oder Tl) hergestellt werden, wobei es sich wahrscheinlich um Distorsionsisomere handelt. Keine Modifikationen dieses Typs konnten jedoch für M ₂ ^I Ni(SO₄)₂ erhalten werden.

---

M ₂ ^I M ^II(SO₄)₂, ¹-, Rb, Cs Tl, aM ¹¹-Cu Ni, . - -, , . M ₂ ^I Cu(SO₄)₂, ¹- l, , , , . , M _i ² Ni(SO₄)₂ .

     

Synthesis of (+)-zeylenone from shikimic acid

Starting from shikimic acid, the total synthesis of zeylenone was studied. The product was proved to be the (+)antipode of zeylenone through analysis and comparison of their respective spectra (including NMR, MS, IR and CD) and optical data. The absolute configuration of the natural product was thus determined to be (1S,2S,3R).