Proton beam writing of Nd:GGG crystals as new waveguide laser sources

Focused proton beam writing has been utilized to fabricate optical channel waveguides in Nd:GGG crystals. The 1?MeV proton beam irradiation creates a local modified region with positive refractive index changes at the end of the proton trajectory, in which the channel waveguide could confine the light field in a symmetric way. Room-temperature laser emission has been achieved at 1063.7?nm, with absorbed pump power of 61?mW (at 808?nm). The obtained slope efficiency of the Nd:GGG waveguide laser system is as high as 66%, which is, to our best knowledge, the highest value for integrated lasers from ion beam processed channel waveguide systems.     

A compact permanent magnet array with a remote homogeneous field

We present the design and construction of a single sided magnet array generating a homogeneous field in a remote volume. The compact array measures 11.5 cm by 10 cm by 6 cm and weights approximately 5 kg. It produces a B(0) field with a 'sweet spot' at a point 1cm above its surface, where its first and second spatial derivatives are approximately zero. Unlike other sweet spot magnets of this general type, our array has B(0) oriented parallel to its surface. This allows an ordinary surface coil to be used for unilateral measurements, giving the potential for dramatic SNR improvement.     

Programmable imaging with two-axis micromirrors

We demonstrate a means of creating a digital image by using a two-axis tilt micromirror to scan a scene. For each different orientation we extract a single gray scale value from the mirror and combine them to form a single composite image. This allows one to choose the distribution of the samples, and so in principle a variable resolution image could be created. We demonstrate this ability to control resolution and projection by constructing a voltage table that compensates for the nonlinear response of the mirrors to the applied voltage.     

Rapid surface-to-volume ratio and tortuosity measurement using Difftrain

Analysis of diffusion measurements as a function of observation time (Delta), to calculate surface-to-volume ratios (S/V) and tortuosities (kappa), is a useful tool in the characterisation of porous media using NMR. However, using conventional pulsed field gradient (PFG) measurements, this requires long total experiment times (typically hours). Here, we show how the rapid diffusion measurement pulse sequence, Difftrain, can be used to provide the required experimental data much more rapidly (typically within minutes) with a consequential reduction in total experiment time of typically over an order of magnitude. Several novel modifications to the Difftrain pulse sequence are also presented to tailor it to this particular application; these include a variable delay between echoes (to ensure optimal echo position with respect to Delta) and a variable tip angle for the refocusing pulse (to ensure optimal use of available signal). Difftrain is applied to measure both S/V and kappa for a model glass bead pack; excellent agreement is found with both a conventional PFG measurement and with a bulk gravimetric measurement of S/V.     

Tailoring the structure of water at a metal surface: a structural analysis of the water bilayer formed on an alloy template

Recent studies show that structures based on the traditional "icelike" water bilayer are not stable on flat transition metal surfaces and, instead, more complex wetting layers are formed. Here we show that an ordered bilayer can be formed on a SnPt(111) alloy template and determine the structure of the water layer by low energy electron diffraction. Close agreement is found between experiment and the structure calculated by density functional theory. Corrugation of the alloy surface allows only alternate water molecules to chemisorb, stabilizing the H-down water bilayer by reducing the metal-hydrogen repulsion compared to a flat surface.     

Picosecond pulses from a cryogenically cooled, composite amplifier using Yb:YAG and Yb:GSAG

A cryogenic Yb amplifier using two laser materials, Gd3Sc2Al3O12 and Y3Al5O12 (YAG), has been used to obtain 70 W average power at 5 kHz pulse repetition frequency; the output was compressed to 1.6 ps, compared with an input compressible to 1.4 ps. The gain broadening obtained by combining two media enables shorter pulses than using Yb:YAG alone but retains the power-scaling advantages of cryogenic Yb:YAG.     

Discrimination of temporally asymmetric modulation with triangular envelopes on a broadband-noise carrier (L)

Highly detectable, time-reversed triangular amplitude modulation, with linear increases and decreases in amplitude, was used in an adaptive task to measure just-noticeable differences for changes in the direction of envelope temporal asymmetry for different modulation depths (m = 1.0 and 0.5) and rates (8, 16, and 32 Hz). Thresholds were analyzed using three different measures of the modulator's shape based on (1) the change in the position of the peak within a cycle, (2) the change in the slope of the modulator's increasing amplitude portion, and (3) the change in slope measured in units of amplitude per unit cycle rather than amplitude per unit time. The amplitude per unit cycle measure resulted in the best fit to all the data, and predicted additional data that were gathered with roved modulation frequency. The results suggest that a time normalization process may be involved in the perception and discrimination of envelope shape.     

Time resolved velocity measurements of unsteady systems using spiral imaging

Although biomolecular dynamics has been investigated using NMR for at least 40 years, only in the past 20 years have internal motions been characterized at atomic resolution throughout proteins and nucleic acids. This development was made possible by multidimensional heteronuclear NMR approaches that provide near complete sequential signal assignments of uniformly labeled biomolecules. Recent methodological advances have enabled characterization of internal dynamics on timescales ranging from picoseconds to seconds, both in solution and in the solid state. The size, complexity and functional significance of biomolecules investigated by NMR continue to grow, as do the insights that have been obtained about function. In this article I review a number of recent advances that have made such studies possible, and provide a few examples of where NMR either by itself or in combination with other approaches has paved the way to a better understanding of the complex relationship between dynamics and biomolecular function. Finally, I discuss prospects for further advances in this field.     

Evaluating the goodness of fit of stochastic mortality models

This study sets out a framework to evaluate the goodness of fit of stochastic mortality models and applies it to six different models estimated using English & Welsh male mortality data over ages 64-89 and years 1961-2007. The methodology exploits the structure of each model to obtain various residual series that are predicted to be iid standard normal under the null hypothesis of model adequacy. Goodness of fit can then be assessed using conventional tests of the predictions of iid standard normality. The models considered are: Lee and Carter’s (1992) one-factor model, a version of Renshaw and Haberman’s (2006) extension of the Lee-Carter model to allow for a cohort-effect, the age-period-cohort model, which is a simplified version of the Renshaw-Haberman model, the 2006 Cairns-Blake-Dowd two-factor model and two generalized versions of the latter that allow for a cohort-effect. For the data set considered, there are some notable differences amongst the different models, but none of the models performs well in all tests and no model clearly dominates the others.