Simulation of Electrical and Thermal Behavior of Poly(propylene) / Carbon Filler Conductive Polymer Composites

PP-carbon CPC show interesting thermo-electrical properties, smooth resistivity increase with temperature up to 150°C and consequently high power dissipation on a wide temperature range. The addition of short carbon fibers to PP already formulated with carbon black increases sharply the electrical conductivity of the CPC but does not have much influence on thermal conductivity as it could have been expected from the favorable aspect ratio of the fibers. The simulations of the thermo-electrical behavior of the CPC under tension put into evidence a temperature gradient at high heat flux due to the low thermal conductivity, which may damage the material itself.     

Luminescent Di‐ and Trinuclear Boron Complexes Based on Aromatic Iminopyrrolyl Spacer Ligands: Synthesis,Characterization, and Application in OLEDs

New bis‐ and tris(iminopyrrole)‐functionalized linear (1,2‐(HNC₄H₃‐C(H)?N)₂‐C₆H₄ ( 2 ), 1,3‐(HNC₄H₃‐C(H)?N)₂‐C₆H₄ ( 3 ), 1,4‐(HNC₄H₃‐C(H)?N)₂‐C₆H₄ ( 4 ), 4,4′‐(HNC₄H₃‐C(H)?N)₂‐(C₆H₄‐C₆H₄) ( 5 ), 1,5‐(HNC₄H₃C‐(H)?N)₂‐C₁₀H₆ ( 6 ), 2,6‐(HNC₄H₃C‐(H)?N)₂‐C₁₀H₆ ( 7 ), 2,6‐(HNC₄H₃C‐(H)?N)₂‐C₁₄H₈ ( 8 )) and star‐shaped (1,3,5‐(HNC₄H₃‐C(H)?N‐1,4‐C₆H₄)₃‐C₆H₃ ( 9 )) π‐conjugated molecules were synthesized by the condensation reactions of 2‐formylpyrrole ( 1 ) with several aromatic di‐ and triamines. The corresponding linear diboron chelate complexes (Ph₂B[1,3‐bis(iminopyrrolyl)‐phenyl]BPh₂ ( 10 ), Ph₂B[1,4‐bis(iminopyrrolyl)‐phenyl]BPh₂ ( 11 ), Ph₂B[4,4′‐bis(iminopyrrolyl)‐biphenyl]BPh₂ ( 12 ), Ph₂B[1,5‐bis(iminopyrrolyl)‐naphthyl]BPh₂ ( 13 ), Ph₂B[2,6‐bis(iminopyrrolyl)‐naphthyl]BPh₂ ( 14 ), Ph₂B[2,6‐bis(iminopyrrolyl)‐anthracenyl]BPh₂ ( 15 )) and the star‐shaped triboron complex ([4′,4′′,4′′′‐tris(iminopyrrolyl)‐1,3,5‐triphenylbenzene](BPh₂)₃ ( 16 )) were obtained in moderate to good yields, by the treatment of 3 – 9 with B(C₆H₅)₃. The ligand precursors are non‐emissive, whereas most of their boron complexes are highly fluorescent; their emission color depends on the π‐conjugation length. The photophysical properties of the luminescent polyboron compounds were measured, showing good solution fluorescence quantum yields ranging from 0.15 to 0.69. DFT and time‐dependent DFT calculations confirmed that molecules 10 and 16 are blue emitters, because only one of the iminopyrrolyl groups becomes planar in the singlet excited state, whereas the second (and third) keeps the same geometry. Compound 13 , in which planarity is not achieved in any of the groups, is poorly emissive. In the other examples ( 11 , 12 , 14 , and 15 ), the LUMO is stabilized, narrowing the gap between the highest occupied molecular orbital and the lowest unoccupied molecular orbital (HOMO–LUMO), and the two iminopyrrolyl groups become planar, extending the size of the π‐system, to afford green to yellow emissions. Organic light‐emitting diodes (OLEDs) were fabricated by using the new polyboron complexes and their luminance was found to be in the order of 2400 cd m^?2, for single layer devices, increasing to 4400 cd m^?2 when a hole‐transporting layer is used.     

Preparation and Characterization of Graphite‐Epoxy Composite Modified with Zinc Hexacyanoferrate and Their Electrochemical Behaviour in Presence of Substituted Anilines

The growth of zinc hexacyanoferrate (ZnHCF) hybrid film on the surface of graphite‐epoxy composite (GEC) electrodes was demonstrated by cyclic voltammetry. Surface morphology of the hybrid film was investigated by using scanning electron microscopy. The effect of the type of monovalent cations on the redox behaviour of hybrid film was also studied. This effect indicated that the radius of the hydrated cation mainly determines the ion permeability of the film.     

Redox Multifunctionality in a Series of PtII Dithiolene Complexes of a Tetrathiafulvalene‐Based Diphosphine Ligand

The redox‐active and chelating diphosphine, 3,4‐dimethyl‐3′,4′‐bis(diphenylphosphino)‐tetrathiafulvalene, denoted as P2 , is engaged in a series of platinum complexes, [(P2)Pt(dithiolene)], with different dithiolate ligands, such as 1,2‐benzenedithiolate (bdt), 1,3‐dithiole‐2‐thione‐4,5‐dithiolate (dmit), and 5,6‐dihydro‐1,4‐dithiin‐2,3‐dithiolate (dddt). The complexes are structurally characterized by X‐ray diffraction, together with a model compound derived from bis(diphenylphosphino)ethane, namely, [(dppe)Pt(dddt)] . Four successive reversible electron‐transfer processes are found for the [(P2)Pt(dddt)] complex, associated with the two covalently linked but electronically uncoupled electrophores, that is, the TTF core and the platinum dithiolene moiety. The assignments of the different redox processes to either one or the other electrophore is made thanks to the electrochemical properties of the model compound [(dppe)Pt(dddt)] lacking the TTF redox core, and with the help of theoretical calculations (DFT) to understand the nature and energy of the frontier orbitals of the [(P2)Pt(dithiolene)] complexes in their different oxidation states. The first oxidation of the highly electron‐rich [(P2)Pt(dddt)] complex can be unambiguously assigned to the redox process affecting the Pt(dddt) moiety rather than the TTF core, a rare example in the coordination chemistry of tetrathiafulvalenes acting as ligands.     

Photoinduced enhancement in the luminescence of hydrophilic quantum dots coated with photocleavable ligands

In search of strategies to photoactivate the luminescence of semiconductor quantum dots, we devised a synthetic approach to attach photocleavable 2-nitrobenzyl groups to CdSe-ZnS core-shell quantum dots coated with hydrophilic polymeric ligands. The emission intensity of the resulting nanostructured constructs increases by more than 60% with the photolysis of the 2-nitrobenzyl appendages. Indeed, the photoinduced separation of the organic chromophores from the inorganic nanoparticles suppresses an electron-transfer pathway from the latter to the former and is mostly responsible for the luminescence enhancement. However, the thiol groups anchoring the polymeric envelope to the ZnS shell also contribute to the photoinduced emission increase. Presumably, their photooxidation eliminates defects on the nanoparticle surface and promotes the radiative deactivation of the excited quantum dots. This effect is fully reversible but its magnitude is only a fraction of the change caused by the photocleavage of the 2-nitrobenzyl groups. In addition, these particular quantum dots can cross the membrane of model cells and their luminescence increases by ~80% after the intracellular photocleavage of the 2-nitrobenzyl quenchers. Thus, photoswitchable luminescent constructs with biocompatible character can be assembled combining the established photochemistry of the 2-nitrobenzyl photocage with the outstanding photophysical properties of semiconductor quantum dots and the hydrophilic character of appropriate polymeric ligands.     

Photomagnetic properties of an iron(II) low-spin complex with an unusually long-lived metastable LIESST state

A comprehensive study of the photomagnetic behavior of the [Fe(L222N5)(CN)2].H2O complex has been carried out. This complex is characterized by a low-spin (LS) iron(II)-metal center up to 400 K and exhibits at 10 K the well-known Light-Induced Excited Spin State Trapping (LIESST) effect. The critical LIESST temperature (T(LIESST)) has been measured to be 105 K. The kinetics of the transition from the metastable high-spin (HS) state to the low-spin state have been determined and used for reproducing the experimental T(LIESST) curve. This study represents a second example of a fully low-spin iron(II)-metal complex up to 400 K, which can be photoexcited at low temperature with an atypical long-lived metastable HS state. This underlines the preponderant role of the inner coordination sphere for stabilizing the lifetime of the photoinduced HS state.     

Stereoselective synthesis of P-chirogenic dibenzophosphole-boranes via aryne intermediates

A new aryne-mediated tandem cross-coupling/P-cyclization sequence starting from tertiary phosphine-boranes and 1,2-dibromobenzenes is reported. P-chirogenic dibenzophospholes become accessible in a regio-, chemo-, and diastereoselective way.     

Molecular and supramolecular C60-oligophenylenevinylene conjugates

Fullerene derivatives are attractive building blocks for the preparation of molecular and supramolecular photoactive devices. As a part of this research, combination of C60 with oligophenylenevinylene (OPV) subunits has generated significant research efforts. These results are summarized in the present account to illustrate the current state-of-the-art of fullerene chemistry for the development of new photoactive materials.     

Mass spectrometric characterization of 3'-imino[60]fulleryl-3'-deoxythymidine by collision-induced dissociation

The primary structure of 3'-imino[60]fulleryl-3'-deoxythymidine ions is studied using mass spectrometry both in the positive and negative modes. Interaction between the subunits is discussed using collision-induced dissociation (CID) spectra. Collisional activation with argon of the sodiated cations leads to the cleavage of the glycosidic bond and the transfer of a radical hydrogen from the deoxyribose to the thymine. The sodiated thymine is the only fragment observed for low collision energies in the positive mode. In the negative mode, two different ionization mechanisms take place, reduction and deprotonation in the presence of triethylamine. The 2.7 eV electron affinity of C60 and its huge cross section compared to the small cross section and predicted 0.44 eV electron affinity of the thymidine subunit most likely localize the radical electron on the fullerene. On the other hand, deprotonation of the 3'-azido-3'-deoxythymidine (AZT) is known to occur in N-3, the most acidic site of the nucleobase. Consequently, deprotonation causes the negative charge to be initially localized on the thymine. Both types of parent anions give the radical anion C60*- as fragment. The other fragments detected are the dehydrogenated 3'-imino[60]fulleryl-3'-deoxyribose anion, C60NH2-, C60N- and C60H-. Since in negative ion mass spectrometry all fragments include the [60]fullerene unit, this suggests that the fragmentation is driven by the electron affinity of the [60]fullerene, likely responsible for a charge transfer between the deprotonated thymine and the C60.     

Unprecedented (Cu2Ln)n complexes (Ln = Gd3+, Tb3+): a new "single chain magnet"

The magnetic study of a trinuclear Cu-Gd-Cu complex confirms that such basic units self-assemble to yield a high spin species. A nice fit of the magnetic data is obtained for an infinite chain of tetranuclear Gd(2)Cu(2) motifs linked through the Gd ions located at the opposite vertexes of the tetranuclear motifs according to two Cu-Gd coordination modes, a double bridging through phenoxo and alkoxo oxygen atoms and a single bridging through deprotonated amide functions. The two interaction pathways are ferromagnetic. Alternating current susceptibility measurements confirm that the equivalent copper-terbium entity is a single chain magnet with a barrier height for reversal of the magnetization equal to 28.5 K.