Hydroxyapatite micro- and nanoparticles: nucleation and growth mechanisms in the presence of citrate species

Hydroxyapatite (HAP) particles with different morphologies were precipitated from homogeneous calcium/citrate/phosphate solutions at physiological temperature. Small variations of the starting solution pH in the range 7.4相似文献   

Separation and Immobilization of Lipase from Penicillium simplicissimum by Selective Adsorption on Hydrophobic Supports

Lipases are an enzyme class of a great importance as biocatalysts applied to organic chemistry. However, it is still necessary to search for new enzymes with special characteristics such as good stability towards high temperatures, organic solvents, and high stereoselectivity presence. The present work’s aim was to immobilize the lipases pool produced by Penicillium simplissicimum, a filamentous fungi strain isolated from Brazilian babassu cake residue. P. simplissicimum lipases were separated into three different fractions using selective adsorption method on different hydrophobic supports (butyl-, phenyl-, and octyl-agarose) at low ionic strength. After immobilization, it was observed that these fractions’ hyperactivation is in the range of 131% to 1133%. This phenomenon probably occurs due to enzyme open form stabilization when immobilized onto hydrophobic supports. Those fractions showed different thermal stability, specificity, and enantioselectivity towards some substrates. Enantiomeric ratio for the hydrolysis of (R,S) 2-O-butyryl-2-phenylacetic acid ranged from 1 to 7.9 for different immobilized P. simplissicimum lipase fractions. Asymmetry factor for diethyl 2-phenylmalonate hydrolysis ranged from 11.8 to 16.4 according to the immobilized P. simplissicimum lipase fractions. Those results showed that sequential adsorption methodology was an efficient strategy to obtain new biocatalysts with different enantioselectivity degrees, thermostability, and specificity prepared with a crude extract produced by a simple and low-cost technology.     

Ion chromatographic determination of iodide in urine and serum using a tubular ion-selective electrode based on a homogeneous crystalline membrane

The use of a laboratory-made iodide ion-selective electrode with tubular configuration and based on a crystalline membrane (AgI/Ag₂S) as the detector for ion chromatographic determination of iodide in urine and serum is described. A CIS reversed-phase column was coated withN-cetylpyridinium chloride to prepare a low-exchange-capacity analytical column and with hexadecyltrimethylammonium bromide to prepare a concentrator pre-column. A 2.0 ml min^–1 flow rate of deionized water and 0.1 mol 1^–1 KNO₃ solution was used for the pre-concentration and for the chromatographic separation, respectively. For optimum performance of the detector a background level of iodide was added into the column effluent. A linear relationship (r = 0.9997) between tubular electrode potential (as peak height) and iodide concentration in the range 5–400 g 1^–1 and a detection limit of 1.47 g 1^–1 were obtained. The method shows good reproducibility for both peak height (2.2% RSD) and retention time (1.3% RSD). Recoveries on its application to the samples were 93.0–100.9% for urine and 91.4–106.0% for serum.     

Determination of selenium in bread-wheat samples grown under a Se-supplementation regime in actual field conditions

Selenium is an essential micronutrient for humans and animals, yet it is deficient in at least one billion people worldwide. Plants and plant-derived products transfer the soil-uptaken selenium to humans; therefore, the cultivation of plants enriched in selenium can be an effective way to improve the selenium status on humankind. This paper focuses on determining the ability of bread wheat to accumulate selenium after supplementation. One of the methods for supplementing this element in plants is foliar application with selenium solutions. These supplemented crop of wheat samples—bread wheat; Triticum aestivum L.—were used to determine if there is an increase of selenium content in cereal grains by comparing them with cereals cultivated in 2009 and harvested in 2010 with no supplementation. The experiments were done using sodium selenate and sodium selenite at three different selenium concentrations: 4, 20 and 100 g per hectare. Total Se is assessed by cyclic neutron activation analysis (CNAA), through short irradiations on the fast pneumatic system (SIPRA) of the Portuguese Research Reactor (RPI-ITN). The short-lived nuclide ^77mSe, that features a half-lifetime of 17.5 s, was used to determine the Se content in SIPRA. The experiment was successful, since the selenium concentration increased in the cropped grains and reached values up to 35 times the non-supplemented ones.     

Actinide heterobimetallic oxides (Th, U): reduction studies

In our laboratories we have been studying the synthesis and reactivity of binary actinide and lanthanide intermetallic compounds. In this work, the air-oxidation of ThCu₂ and AnNi₂ (An = Th, U) was followed by thermogravimetry (TG) and the products were characterized by X-ray powder diffraction (XRD). The heterobimetallic oxides obtained are described by the formulas 2MO·ThO₂ (M = Cu, Ni) and 2NiO·UO₃. The thermogravimetric analysis under hydrogen of these heterobimetallic oxides show one mass loss for 2MO·ThO₂ and two mass losses for 2NiO·UO₃ over a wide range of temperature (293–1273 K). The characterization by XRD shows that the reduction products are 2M·ThO₂ (M = Cu, Ni) and 2Ni·UO₂, with all the actinides in the 4+ oxidation state. The actinide heterobimetallic oxides were described as copper or nickel supported catalysts.     

The effect of water or salt solution on thin hydrophobic films

Hydrophobic films of polystyrene synthesized in bulk (PS) and by emulsion polymerization in the presence of the cationic surfactant cetyltrimethylammonium bromide (PS-CTAB) or the anionic surfactant sodium dodecyl sulfate (PS-SDS) were characterized by means of ellipsometry, contact angle measurements, and atomic force microscopy. Thin (approximately 65 nm) and thick (approximately 300 nm) films were spin-coated on hydrophilic silicon wafers. PS films presented scarcely tiny holes, while PS-CTAB and PS-SDS films presented holes and protuberances. The former were attributed to dewetting effects and the latter to surfactant clusters. The films were exposed to water or to a 0.1 mol/L NaCl solution for 24 h. Ex situ measurements evidenced strong topographic alterations after the exposure to the fluid. A model based on the diffusion of water (or electrolyte) molecules to the polymer/silcon dioxide interface through holes or defects on the film edges was proposed to explain the appearance of wrinkles and protuberances. In situ ellipsometric measurements were performed and compared with simulations, which considered either a water layer between a polymer and a silcon dioxide layer or an air layer between a polymer and water (medium). In the case of thin PS films, the ellipsometric angles evidenced a very thin (0.5-1.0 nm) air layer between water and the PS films. Upon increasing the PS film thickness, no air layer could be observed by ellipsometry. Regardless of the thickness, the ellipsometric data obtained for PS-CTAB and PS-SDS films did not indicate the presence of an air layer between them and the aqueous media. The dramatic changes in the topography of PS, PS-CTAB, and PS-SDS after immersion in salt solution were explained with proposed models. From a practical point of view, this study is particularly relevant because many hydrophobic polymers are used as substrates for biomedical purposes, where the physiological ionic strength is 0.15 mol/L NaCl.     

A Mononuclear Uranium(IV) Single‐Molecule Magnet with an Azobenzene Radical Ligand

A tetravalent uranium compound with a radical azobenzene ligand, namely, [{(SiMe₂NPh)₃‐tacn}U^IV(η²‐N₂Ph₂^.)] ( 2 ), was obtained by one‐electron reduction of azobenzene by the trivalent uranium compound [U^III{(SiMe₂NPh)₃‐tacn}] ( 1 ). Compound 2 was characterized by single‐crystal X‐ray diffraction and ¹H NMR, IR, and UV/Vis/NIR spectroscopy. The magnetic properties of 2 and precursor 1 were studied by static magnetization and ac susceptibility measurements, which for the former revealed single‐molecule magnet behaviour for the first time in a mononuclear U^IV compound, whereas trivalent uranium compound 1 does not exhibit slow relaxation of the magnetization at low temperatures. A first approximation to the magnetic behaviour of these compounds was attempted by combining an effective electrostatic model with a phenomenological approach using the full single‐ion Hamiltonian.     

Ethanol Production from Sugarcane Bagasse Hydrolysate Using Pichia stipitis

The objective of this study was to evaluate the ethanol production from the sugars contained in the sugarcane bagasse hemicellulosic hydrolysate with the yeast Pichia stipitis DSM 3651. The fermentations were carried out in 250-mL Erlenmeyers with 100 mL of medium incubated at 200 rpm and 30 °C for 120 h. The medium was composed by raw (non-detoxified) hydrolysate or by hydrolysates detoxified by pH alteration followed by active charcoal adsorption or by adsorption into ion-exchange resins, all of them supplemented with yeast extract (3 g/L), malt extract (3 g/L), and peptone (5 g/L). The initial concentration of cells was 3 g/L. According to the results, the detoxification procedures removed inhibitory compounds from the hemicellulosic hydrolysate and, thus, improved the bioconversion of the sugars into ethanol. The fermentation using the non-detoxified hydrolysate led to 4.9 g/L ethanol in 120 h, with a yield of 0.20 g/g and a productivity of 0.04 g L^?1 h^?1. The detoxification by pH alteration and active charcoal adsorption led to 6.1 g/L ethanol in 48 h, with a yield of 0.30 g/g and a productivity of 0.13 g L^?1 h^?1. The detoxification by adsorption into ion-exchange resins, in turn, provided 7.5 g/L ethanol in 48 h, with a yield of 0.30 g/g and a productivity of 0.16 g L^?1 h^?1.     

Broken symmetry density functional study of a mixed‐valence unsymmetrical dinuclear iron complex

Density functional theory (DFT) calculations with different exchange‐correlation functionals were performed for a mixed valence Fe(II)/Fe(III) binuclear complex with μ‐methoxo and two μ‐carboxylate bridging ligands, (1) with geometry optimizations being performed for all possible spin multiplicities (M_S = 2, 4, 6, 8, and 10). Within the exchange‐correlation functionals studied, only the hybrid GGA functionals B3P and B3LYP and also the pure GGA functional RPBE, predicts the geometry with high spin (S = 9/2) to be more stable than the geometry with low spin state (S = 1/2) by 20 kcal/mol, in agreement with the experimental findings. These functionals also predict the same stability order for the different spin states, being M_S = 10>8>6>2>4. The meta‐GGA functionals TPSS and TPSSh and also the pure GGA functionals BLYP and BP86 predict different stability orders. The computed average EPR g‐tensor, g_av, of 2.03, at the B3LYP level, is in good agreement with the experimental findings. Heisenberg exchange coupling constants, J, were calculated within the broken‐symmetry formalism, at the B3LYP level, showing that the two iron centers are antiferromagnetic coupling, with a very weak coupling constant of about ?7 cm^?1, in good agreement with the experimental value. Additionally, the effect of using different multiplicities of the reference geometries on the computed J value is discussed. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010