Spectroscopy and Structure of Sol-Gel Systems

Sol-gel derived glasses may differ from conventional melt-quenched glasses owing to the peculiar microstructures existing at the gel state, such that, even after gel densification, some differences may remain in their composition and molecular structure.This paper discusses structural characteristics of thin film oxide gels and glasses, with a special emphasis on SiO2-TiO2 based systems, which are of particular interest for sol-gel integrated optics applications. Short range structure aspects are discussed based on infrared, X-ray photoemission and X-ray photoabsorption spectroscopies. The chemical homogeneity of sol-gel materials is evaluated, based on X-ray photoemission and nuclear magnetic resonance spectroscopies, dealing in particular with the issue of homo- vs. heterocondensation. Finally, some microstructural features of sol-gel derived films are analyzed, namely the relationship between infrared absorption and porosity and the structure of nanocrystalline sol-gel films, based on grazing incidence X-ray diffraction and micro-Raman spectroscopy. The types of structural information obtainable by each different technique are compared in detail.     

Development of a rapid and specific assay for detection of busulfan in human plasma by high-performance liquid chromatography/electrospray ionization tandem mass spectrometry

A sensitive and specific assay for detection of busulfan in human plasma was developed. The assay is based on rapid isolation of busulfan by liquid-liquid extraction with ethyl acetate, and detection by high-performance liquid chromatography with electrospray ionization and tandem mass spectrometry. 1,6-Bis(methanesulfonyloxy)hexane, a synthesized analogue of busulfan, was used as the internal standard (IS). The acquisition was performed in the multiple reaction monitoring mode; busulfan and the IS were detected with no interferences from plasma matrix. The method was linear over the range 5-2500 ng mL(-1), with r2 > 0.99 and a run time of only 3.5 min. The intra- and inter-assay precisions were in the ranges 2.1-11.9% and 3.2-10.1%, respectively, and the intra- and inter-assay accuracies were 92.2-107.6% and 94.7-104.1%, respectively. The absolute recoveries were 82.0% (20 ng mL(-1)), 90.6% (1000 ng mL(-1)) and 80.0% (2000 ng mL(-1)) for busulfan, and 89.1% for the IS (1000 ng mL(-1)). The limits of detection and quantification were 2 and 5 ng mL(-1), respectively. The validated method was successfully applied to analyze plasma samples obtained from six adults receiving doses of 1 mg kg(-1) in a conditioning regimen prior to bone marrow transplantation. A marked intra-patient variation in busulfan concentrations during the steady state was observed, which limits the application of pharmacokinetic modeling and suggests that continuous therapeutic monitoring is necessary for adequate individualized dosing. In this regard, the present assay brings important advantages relative to other methods described in the literature, i.e., it is highly specific and simple to perform, with a rapid chromatographic run time (3.5 min), and the whole procedure can be completed in 4-5 h, which would permit dose corrections after the third dose allowing earlier and better dosing adjustments towards the target level of busulfan.     

ICP-MS multi-element analysis of wine samples - a comparative study of the methodologies used in two laboratories

A comparison of the performance of the methodologies used in two distinct laboratories (Lab A and Lab B) for multi-element analysis in different wines was carried out. ICP-MS apparatus (quadrupole mass analyzers) of different brands as well as different wine pre-treatments were used. At Lab A, a pre-treatment by UV-irradiation was performed. At Lab B, a micro-concentric nebulizer was used for direct analysis of the wine. Twenty-six elements (Li, V, Co, Ni, Cu, Zn, Ga, As, Rb, Sr, Ba, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, and Pb) were measured in common at the two labs in three different wine samples (red and white Bordeaux table wines and Port wine) and the results were compared. The two methodologies provided similar LODs and similar precisions, with RSDs of 0.5-5%, for most of the elements. The recovery percentages were 85-120% at Lab A for the three wines, and 78-119% at Lab B for the Bordeaux wines, validating the accuracy of the methods used. Comparable results were obtained at both labs for ten elements (Li, V, Co, Ni, Cu, Zn, Rb, Sr, Ba, and Pb) in the three selected wines; the differences were lower than 10% in most cases. For REEs, the differences observed were slightly higher, but still in the acceptable range due to the sub-ppb levels involved. The results obtained for As and Ga were not comparable, due to methodological influence. A comparison through linear least-squares adjustment indicated that the results obtained by the two labs were linearly correlated (correlation coefficient =0.997) but statistically different as the slope was slightly, but significantly different from one, for a confidence level of 95% (the intercept was statistically identical to zero in any case). In the future, strictly more identical results can be achieved by using a reference wine sample.     

A mild and efficient method for halogenation of 3,5-dimethyl pyrazoles by ultrasound irradiation using N-halosuccinimides

The 4-halo-3,5-dimethyl pyrazoles have been synthetisized in good yields in short reaction times in the absence of a catalyst by reaction of 3,5-dimethyl pyrazoles with N-halosuccinimides (NBS, NCS and NIS) under ultrasound irradiation. Finally, the halogenation of pyrazoles with Br₂, ICl and I₂ was showed in similar conditions.     

An easy and stereoselective synthesis of N-Boc-dolaproine via the Baylis-Hillman reaction

In this communication we report a stereoselective total synthesis of N-Boc-dolaproine (Dap), an amino acid residue of the antineoplastic pentapeptide Dolastatin 10. Our strategy is based on a Baylis-Hillman reaction between N-Boc-prolinal and methyl acrylate, followed by a diastereoselective double bond hydrogenation and hydrolysis of the ester function.     

NMR Conformational Analysis and Theoretical Calculations for 2‐Aryl‐ 1,3‐dihydroxy‐4,4,5,5‐tetramethylimidazolidines

Conformational studies of 1,3‐dihydroxy‐4,4,5,5‐tetramethyl‐2‐(pyridin‐1‐yl)imidazolidine ( 1a ) and 1,3‐dihydroxy‐4,4,5,5‐tetramethyl‐2‐(pyridin‐3‐yl)imidazolidine ( 1b ), carried out by using 1D ¹H‐ and ¹³C‐NMR and 2D HMQC, HMBC, and NOESY experiments and with the aid of theoretical calculations, indicate that the OH groups are trans to the pyridinyl substituent. Because the two ¹H‐NMR signals of the Me groups are distinguishable and do not change between 290 and 380 K, it is proposed that 1a and 1b have each only one conformation in this temperature range. This behavior was not found with 1,3‐dihydroxy‐4,4,5,5‐tetramethyl‐2‐(pyridin‐2‐yl)imidazolidine ( 1c ) because its Me ¹H‐NMR signals cross over at 300 K. Hence, more than one conformation must be present, beyond those produced by simple inversions. Theoretical calculations including temperature and solvent effects were performed to provide further information on the conformational analysis and to help to assign the NMR data. The combination of NMR measurements and quantum‐chemical calculations is shown to be a very promising strategy for conformational analysis studies in solution.     

Raman spectra and structure of multicomponent oxide planar waveguides prepared by sol-gel

This work was aimed at understanding the structure of SiO₂–MO₂ (M = Ti, Zr, Hf) and SiO₂–HfO₂–MO₂ (M = Ti, Zr) materials, used as mixed oxide glass hosts for Er³⁺ ions in the fabrication of optical planar waveguides by sol-gel processing. This structural study was performed by Waveguide Raman Spectroscopy (WRS), complemented with X-ray diffraction (XRD). The admixture of TiO₂ to HfO₂, SiO₂–HfO₂ and HfO₂–ZrO₂ compositions was found to cause precipitation of nanocrystals of tetragonal HfO₂ or ZrO₂, or the formation of hafnia-titania mixed crystals, depending on the HfO₂/TiO₂ molar ratio.     

Optical Nanocomposite Planar Waveguides Doped with Rare-Earth and Noble Metal Elements

The present paper is focused on multilayer Er³⁺-doped silica-titania planar waveguides, co-doped with silver, which were prepared by spin-coating on silica glass, or buffered single crystal silicon substrates. The single layer thickness (0.4 m) and refractive index (1.60–1.63) were measured by spectroscopic ellipsometry at 715 nm. The thickness of the waveguides (measured by mechanical profilometry) was 1 m and their optical propagation losses were measured at different laser wavelengths (488 nm, 514 nm and 633 nm), exhibiting an approximately Rayleigh-like behavior. The thermal precipitation of silver nanocrystallites was achieved, both in air and under a controlled atmosphere (dry nitrogen) and these were characterized by visible absorption spectroscopy, which clearly showed the development of a plasmon absorption band near 415 nm, by X-ray diffraction (XRD) and Transmission Electron Microscopy (TEM). The Er³⁺ metastable level lifetimes for the emission at ca. 1.54 m were found to be ca. 4–6 ms, for Er³⁺ concentrations varying between 0.2–2.0 mol% (or (0.4–4.4) × 10²⁰ ions/cm³), but no significant variation was observed with the Ag concentration added (up to 2.5 mol%).     

2,2,4,4‐Tetra‐tert‐butyl‐1,3,5,2,4‐benzotrioxadisilepine‐7‐carbaldehyde

The mol­ecule of the title compound, C₂₃H₄₀O₄Si₂, features an approximate non‐crystallographic C₂ symmetry axis. The aldehyde group is disordered over two positions with similar occupancies. The geometry of the isolated mol­ecule was studied by ab initio quantum mechanical calculations employing a mol­ecular orbital Hartree–Fock method. The calculations reproduce well the equilibrium geometry but slightly overestimate the value of the Si—O bond lengths of the trioxadisilepine ring.