Hidrogeochemical study in South Amazon region using Photoacoustic Spectroscopy

In this study we demonstrate the usefulness of the Photoacoustic Spectroscopy (PAS) in the investigation of water collected from a natural site located within the Amazon region, Brazil, during the wet to dry seasons transition (May/2006). The water samples were collected from different stages along a hydrologic pathway including precipitation water (Prec), groundwater (GW), through flow water (TF), overland flow water (OF), and stream flow water (SW). The observed photoacoustic spectral features, in the 0.3 to 1.0 μm wavelength region, fall within three distinct bands (C, S, and L). We found band-C, band-S and band-L occurring in the spectral range of 0.30 to 0.40 μm, 0.40 to 0.45 μm and 0.45 to 1.0 μm regions, respectively. The photoacoustic features shift peak positions and change intensities for all samples investigated, thus supporting the proposal of PAS as a useful technique to investigate water samples from natural environments.     

Effective magnetic monopoles and universal conductance fluctuations

The observation of isolated positive and negative charges, but not isolated magnetic north and south poles, is an old puzzle. Instead, evidence of effective magnetic monopoles has been found in the abstract momentum space. Apart from Hall-related effects, few observable consequences of these abstract monopoles are known. Here, we show that it is possible to manipulate the monopoles by external magnetic fields and probe them by universal conductance fluctuation measurements in ferromagnets with strong spin-orbit coupling. The observed fluctuations are not noise, but reproducible quasiperiodic oscillations as a function of magnetization direction, a novel Berry phase fingerprint of the magnetic monopoles.     

DNA transport and delivery in thermal gradients near optofluidic resonators

Heat generation and its impact on DNA transport in the vicinity of an optofluidic silicon photonic crystal resonator are studied theoretically and experimentally. The temperature rise is measured to be as high as 57 K for 10 mW of input power. The resulting optical trapping and biomolecular sensing properties of these devices are shown to be strongly affected by the combination of buoyancy driven flow and thermophoresis. Specifically, the region around the electromagnetic hot spot is depleted in biomolecules because of a high free energy barrier.     

Microemulsion electrokinetic chromatography as a suitable tool for lipophilicity determination of acidic,neutral, and basic compounds

In the present work, several MEEKC systems are studied to assess their suitability for lipophilicity determination of acidic, neutral, and basic compounds. Thus, several microemulsion compositions over a wide range of pH values (from 2.0 to 12.0), containing heptane, 1?butanol and different types and amounts of surfactant (SDS or sodium cholate: from 1.3 to 3.3%) are characterized using Abraham's solvation model. The addition of acetonitrile (up to 10%) is also studied, since it increases the resolution of the technique for the most lipophilic compounds. The system coefficients obtained are very similar to those of the 1?octanol/water, used as the reference lipophilicity index, allowing simple and linear correlations between the 1?octanol/water partition values (log P_o/w) and MEEKC mass distribution ratios (log k_MEEKC). Variations in the microemulsion composition (aqueous buffer, surfactant, concentration of ACN) did not significantly affect the similarity of the MEEKC systems to log P_o/w partition.     

Cyclopalladation of N-phenyl-4-ferrocenylmethylpyrazoles: Crystal structure of [Pd{κ-C,N-C6H4-1-[(3,5-Me2-C3N2)-CH2-(η-C5H4)Fe(η-C5H5)]}Cl(PPh3)] · CH2Cl2

The synthesis and characterization of pyrazole derivatives of general formula [C₆H₄-4-R-1-{(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)}] [R = OMe (1a) or H (1b)] with a ferrocenylmethyl substituent are described.The study of the reactivity of compounds 1 with palladium(II) acetate has allowed the isolation of complexes (μ-AcO)₂[Pd{κ²-C,N-C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}]₂ (2) [R = OMe (2a) or H (2b)] that contain a bidentate [C(sp², phenyl), N]⁻ ligand and a central “Pd(μ-AcO)₂Pd” unit.Furthermore, treatment of 2 with LiCl produced complexes (μ-Cl)₂[Pd{κ²-C,N-C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}]₂ (3) [R = OMe (3a) or H (3b)] that arise from the replacement of the acetato ligands by the Cl⁻.Compounds 2 and 3 also react with PPh₃ giving the monomeric complexes [Pd{κ²-C,N-C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}X(PPh₃)] {X⁻ = AcO⁻ and R = OMe (5a) or H (5b) or X⁻ = Cl⁻ and R = OMe (6a) or H (6b)}, where the phosphine is in a cis-arrangement to the metallated carbon atom. Treatment of 3 with thallium(I) acetylacetonate produced [Pd{κ²-C,N-C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}(acac)] (7) [R = OMe (7a) or H (7b)]. Electrochemical studies of the free ligands and the cyclopalladated complexes are also reported. The dimeric complexes 3 also react with MeO₂C-CC-CO₂Me (in a 1:4 molar ratio) giving [Pd{(MeO₂C-CC-CO₂Me)₂C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}Cl] (8) [R = OMe (8a) or H (8b)], which arise from the bis(insertion) of the alkyne into the σ{Pd-C(sp², phenyl)} bond of 3.     

New ruthenium(II) complexes with enantiomerically pure bis- and tris(pinene)-fused tridentate ligands. Synthesis, characterization and stereoisomeric analysis

A new set of Ru-Cl complexes containing either the pinene[5,6]bpea ligand (L1) or the C3 symmetric pinene[4,5]tpmOMe (L2) tridentate ligand in combination with the bidentate (B) 2,2'-bipyridine (bpy) or 1,2-diphenylphosphinoethane (dppe) with general formula [RuCl(L1 or L2)(B)](+) have been prepared and thoroughly characterized. In the solid state, X-ray diffraction analysis techniques have been used. In solution, cyclic voltammetry (CV) and 1D and 2D NMR spectroscopy have been employed. DFT calculations have been also performed on these complexes and their achiral analogues previously reported in our group, to interpret and complement experimental results. Whereas isomerically pure complexes ([Ru(II)Cl(L2)(bpy)](BF4), 5 and [Ru(II)Cl(L2)(dppe)](BF4), 6) are obtained when starting from the highly symmetric [Ru(III)Cl3(L2)], 2, isomeric mixtures of cis, fac-[Ru(II)Cl(L1)(bpy)](BF4) (3b/3b'), trans,fac- (3a) and up/down,mer- (3c, 3d) isomers are formed when bpy is added to the less symmetric [Ru(III)Cl3(L1)], 1, in contrast to the case of the bulky dppe ligand that, upon coordination to 1, leads to the trans,fac-[Ru(II)Cl(L1)(dppe)](BF4) (4a) complex as a sole isomer due to steric factors.     

Is Genetic Engineering a Route to Enhance Microalgae-Mediated Bioremediation of Heavy Metal-Containing Effluents?

Contamination of the biosphere by heavy metals has been rising, due to accelerated anthropogenic activities, and is nowadays, a matter of serious global concern. Removal of such inorganic pollutants from aquatic environments via biological processes has earned great popularity, for its cost-effectiveness and high efficiency, compared to conventional physicochemical methods. Among candidate organisms, microalgae offer several competitive advantages; phycoremediation has even been claimed as the next generation of wastewater treatment technologies. Furthermore, integration of microalgae-mediated wastewater treatment and bioenergy production adds favorably to the economic feasibility of the former process—with energy security coming along with environmental sustainability. However, poor biomass productivity under abiotic stress conditions has hindered the large-scale deployment of microalgae. Recent advances encompassing molecular tools for genome editing, together with the advent of multiomics technologies and computational approaches, have permitted the design of tailor-made microalgal cell factories, which encompass multiple beneficial traits, while circumventing those associated with the bioaccumulation of unfavorable chemicals. Previous studies unfolded several routes through which genetic engineering-mediated improvements appear feasible (encompassing sequestration/uptake capacity and specificity for heavy metals); they can be categorized as metal transportation, chelation, or biotransformation, with regulation of metal- and oxidative stress response, as well as cell surface engineering playing a crucial role therein. This review covers the state-of-the-art metal stress mitigation mechanisms prevalent in microalgae, and discusses putative and tested metabolic engineering approaches, aimed at further improvement of those biological processes. Finally, current research gaps and future prospects arising from use of transgenic microalgae for heavy metal phycoremediation are reviewed.     

Chemical Approach to the Optimization of Conditions Using HS-SPME/GC–MS for Characterization of Volatile Compounds in Eugenia brasiliensis Fruit

Grumixama (Eugenia brasiliensis Lam.) is a native fruit of the Brazilian Atlantic Forest, belonging to the Myrtaceae family, which designatesthe most significant number of species with food potential. It stands out due to its phytochemical characteristics because of the presence of polyphenols and volatile organic compounds. Volatile compounds are substances released by foods that give off an aroma and influence flavor. Solid-phase microextraction is a technique that allows for low-cost, fast, and solvent-free extraction, has an affinity for numerous analytes, and is easily coupled to gas chromatography. The objectives of this work were to evaluate the efficiency of different fibers of SPME (solid-phase microextraction) in the extraction of volatile organic compounds from grumixama pulp; optimize a method for extraction time, temperature, and sample weight; and to determine the characteristic volatile profile of this fruit. For the extraction of volatile compounds, three fibers of different polarities were used: polar polyacrylate (PA) fibers, divinylbenzene/carboxyne/polydimethylsiloxane (DVB/CAR/PDMS) semipolar fibers, and polydimethylsiloxane/divinylbenzene (PDMS/DVB). Fourteen volatile organic compounds (VOCs) were identified by DVB/CAR/PDMS, six by PA, and seven by PDMS/DVB through solid-phase microextraction in the headspace mode (SPME-HS). Considering the total number of compounds identified, regardless of the fiber used, and the optimization of the method, Eugenia brasiliensis presented sesquiterpene fractions (85.7%, 83.3%, and 85.7% of total VOCs) higher than the monoterpene fractions (14.3%, 16.7%, and 14.3%) for DVB/CAR/PDMS, PA, and PDMS/DVB, respectively in its composition. In addition, it was possible to verify that the fiber DVB/CAR/PDMS presented a better efficiency due to the larger chromatographic area observed when the grumixama pulp was subjected to conditions of 75 °C, 2.0 g, and an adsorption time of 20 min.     

Enzymatic kinetics of cellulose hydrolysis: a QCM-D study

The interactions between films of cellulose and cellulase enzymes were monitored using a quartz crystal microbalance (QCM). Real-time measurements of the coupled contributions of enzyme binding and hydrolytic reactions were fitted to a kinetic model that described closely significant cellulase activities. The proposed model combines simple Boltzmann sigmoidal and 1 - exp expressions. The obtained kinetics parameters were proven to be useful to discriminate the effects of incubation variables and also to perform enzyme screening. Furthermore, it is proposed that the energy dissipation of a film subject to enzymatic hydrolysis brings to light its structural changes. Overall, it is demonstrated that the variations registered in QCM frequency and dissipation of the film are indicative of mass and morphological transformations due to enzyme activities; these include binding phenomena, progressive degradation of the cellulose film, existence of residual, recalcitrant cellulose fragments, and the occurrence of other less apparent changes throughout the course of incubation.