Damping of Crank–Nicolson error oscillations

The Crank–Nicolson (CN) simulation method has an oscillatory response to sharp initial transients. The technique is convenient but the oscillations make it less popular. Several ways of damping the oscillations in two types of electrochemical computations are investigated. For a simple one-dimensional system with an initial singularity, subdivision of the first time interval into a number of equal subintervals (the Pearson method) works rather well, and so does division with exponentially increasing subintervals, where however an optimum expansion parameter must be found. This method can be computationally more expensive with some systems. The simple device of starting with one backward implicit (BI, or Laasonen) step does damp the oscillations, but not always sufficiently. For electrochemical microdisk simulations which are two-dimensional in space and using CN, the use of a first BI step is much more effective and is recommended. Division into subintervals is also effective, and again, both the Pearson method and exponentially increasing subintervals methods are effective here. Exponentially increasing subintervals are often considerably more expensive computationally. Expanding intervals over the whole simulation period, although capable of satisfactory results, for most systems will require more cpu time compared with subdivision of the first interval only.     

L X-ray production cross sections, average L shell fluorescence yield and intensity ratios in heavy elements

L X-ray fluorescence cross sections, and intensity ratios were measured for elements in the 70￡Z￡92 atomic range at the excitation energy 59.5 keV using a Si(Li) detector. Furthermore, L X-ray fluorescence cross sections and intensity ratios were calculated for elements in the same range. The average L shell fluorescence yields were derived using experimental L X-ray fluorescence cross sections and theoretical photoionization cross sections. The obtained results were compared with other experimental and theoretical values. This revised version was published online in August 2006 with corrections to the Cover Date.     

Synthesis of β-Aminophosphonates and Study of Their Acid-Base Properties and Phase Distribution in Water-Organic Solvent Systems

New and previously known β-aminoethylphosphonates were synthesized by addition of primary and secondary amines to vinylphosphonates, and their IR and NMR spectra were examined. Diethyl 2-diethylaminoethylphosphonate and diethyl 2-morpholinoethylphosphonate were found to be stronger bases than the corresponding aminomethylphosphonates, but all these are weaker bases than their precursors, nonphosphorylated amines. Distribution constants of β-aminophosphonates between water and some organic solvents were determined and compared with those of their α-amino homologs.     

Potential and Current Distributions in Chlorine Diaphragm Electrolyzers with Gas Removal from the Back Side of External Electrodes and Possibility of Electrolysis Intensification

The cell voltage balance components of monopolar and bipolar electrolyzers were analyzed on the basis of calculations in terms of a mathematical model of the potential and current distributions along the cell height and tests of a laboratory electrolyzer of industrial height. Ways to diminish energy expenditure and to intensify diaphragm electrolysis of aqueous sodium chloride solutions were substantiated theoretically and experimentally.     

Sorption-photometric and test determination of lead in environmental materials

The main analytical characteristics of the reaction of hexaoxacycloazochrom with lead were determined. A method for the sorption preconcentration of lead on the Thiopan 14 sorbent was proposed. Procedures were developed for the photometric determination of lead in natural waters, air, and soil at the level of the maximum permissible concentration. A new melange gel technique for preparing silicic acid xerogels modified with hexaoxacycloazochrom was developed for the test determination of lead in environmental samples at the level of the maximum permissible concentration.     

Determination of rare earth elements by neutron activation analysis in altered ultramafic rocks from the Akwatia District of the Birim diamondiferous field,Ghana

Summary Rare earth element (REE) analysis using instrumental neutron activation (INAA) was carried out on ultramafic rocks from the Akwatia District of the Birim diamondiferous field, Ghana, with the primary objective of investigating their kimberlitic characteristics. The total REE concentrations range from 113 to 1610 ppm and fall within the interval of those reported in the literature for kimberlites. Despite the marked difference in the REE contents, all the analyzed samples show similar REE patterns that resemble those of kimberlites. However, compared to most of the kimberlites, the ultramafic rocks have small negative Eu anomalies and low light-REE/heavy-REE ratios, suggesting that the rocks have been significantly assimilated by crustal rocks.     

Effects of Si−Al composition on the fluorescence spectra of 1-naphthol during the sol-gel-xerogel transitions

A systematic study has been carried out on the characteristic changes in the fluorescence spectra of 1-naphthol doped in the sol-gel-xerogel transition systems comprised of tetraethyl orthosilicate and diisobutoxyaluminium triethylsilicate catalyzed by a small amount of HCl, NH₄OH, as well as under uncatalyzed conditions. In the systems containing large amounts of silicon, the fluorescence of 1-naphthol shifts to the red (a predominant emission from the ¹L_a state) during the first stage of the reaction. This red shift indicates an increase in the polarity of the matrix surrounding 1-naphthol. In the second stage of the reaction, the spectrum shifts to the blue (a predominant emission from the ¹L_b state), reflecting an increase in the micro-viscosity around 1-naphthol. In the systems containing relatively large amounts of aluminum, however, the spectrum just after mixing shows a larger red shift than that originating from the ¹L₂ emission. This large red-shifted fluorescence reflects the formation of a complex between 1-naphthol and the −O−Al−O−Si−O-network. The spectrum then shifted to the blue. The spectral behaviours observed indicate that there is a large and dynamic molecular-level change in the physicochemical properties of the matrix surrounding the 1-naphthol molecules during the sol-gel-xerogel transitions of the systems while the gelation phenomenon reflects macroscopic inflexibility although it is completely different from the restriction of movement at the molecular level.     

Fixation and reduction of molecular nitrogen by [WH4(PC2H5Ph2)4] and [WH4(PCH3Ph2)4] in a γ-radiation field

Hydride complexes of W(IV) with dpep (diphenylethylphosphine) and dpmp (diphenylmethylphosphine) were irradiated in thf+C₆H₁₂(11) solutions, saturated with N₂+H₂(13). Radiation yields of hydrazine, ammonia and amines were evaluated. The mechanism of reduction of molecular nitrogen is discussed.     

New books

Summary Micromolar analyses of the nitrogen species NH₃, NO ₂ ^– , and NO ₃ ^– in soil and other samples are usually accomplished by extracting several samples and testing each for a different species. This procedure is not viable when the quantity of the initial sample is limited. An improved method of separating and analysing for ammonia NH₃(aq), nitrite NO ₂ ^– (aq), and nitrate NO ₃ ^– (aq) from a single small sample with concentrations of 0–50 mol/l is reported. No interferences or carryovers among the three nitrogen containing species were found. Uncertainties were ±2–5 mol/l and accuracies with respect to standards were ±3 mol/l.     

Thermische Zersetzung von CuInSe2, LiInSe2 und LiInTe2

The thermal decompositions of CuInSe₂, LiInSe₂ and LiInTe₂ in vacuum at high temperatures were studied by using TG/DTG coupled with mass spectrometry. For CuInSe₂, two steps were found to be significant. Up to 1000 °C Se₂ and In₂Se evaporate, followed later by Cu₂Se. The Li-containing compounds show similar behaviour. However, Li⁺ was already detected during the first step. Obviously, Li₂Se dissociates more readily than Cu₂Se. No Cu⁺ species were detected up to the complete evaporation of CuInSe₂.